journal article·2005-05

Fabrication of potential NiMoP diffusion barrier/seed layers for Cu interconnects via electroless deposition

Y. Wu, C. C. Wan, Y. Y. Wang

Journal of Electronic Materials· Volume 34· Issue 5
Publisher page

Abstract

Potential NiMoP barrier/seed layers for Cu interconnects have been successfully formed by electroless deposition on SiO2. Four different wet processes were attempted to activate the surface before electroless deposition. Material properties including the crystal structure, deposition rate, composition, and electrical resistivity of NiMoP layers were investigated by atomic force microscopy (AFM), scanning electron microscopy (SEM), Auger electron spectroscopy, x-ray diffraction (XRD), four-point probe, and surface profilometry (Alpha-step). In this study, different compositions of NiMoP films have been obtained. Ni89Mo2P9 with nanocrystalline structure has the highest resistivity due to enriched P content, while Ni88Mo9P3 has the lowest value among the compositions considered in this study. The seed layer and the barrier layer functions of NiMoP were verified by direct Cu electrodeposition and secondary ion mass spectroscopy (SIMS).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Copper Interconnects and Reliability · Semiconductor materials and interfaces

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. P.C. Andricacos, C. Uzoh, J.O. Dukovic, J. Horkans, and H. Deligianni, IBM J. Res. Development 42, 567 (1998).10.1147/rd.425.0567 ↗
2. M. Takeyama, A. Noya, T. Sase, and A. Ohta, J. Vac. Sci. Technol. 14, 674 (1996).10.1116/1.589155 ↗
3. J.C. Chiou, H.I. Wang, and M.C. Chen, J. Electrochem. Soc. 143, 990 (1996).10.1149/1.1836570 ↗
4. G.S. Sandhu, S.G. Meikle, and T.T. Doan, Appl. Phys. Lett. 62, 240 (1993).10.1063/1.108977 ↗
5. M.H. Staia, E.S. Puchi, D.B. Lewis, J. Cawley, and D. Morel, Surface Coatings Technol. 86–87, 432 (1996).10.1016/S0257-8972(96)02981-7 ↗
6. M.H. Tsai, S.C. Sun, C.P. Lee, H.T. Chiu, and S.C. Wu, Thin Solid Films 270, 531 (1995).10.1016/0040-6090(95)06752-3 ↗
7. Kwang-Nam Cho, Chang-Hee Han, Kyung-Bong Noh, and Jong Gil Lee, Jpn. J. Appl. Phys. 37, 6502 (1998).10.1143/JJAP.37.6502 ↗
8. K.C. Walter, R.P. Fetherston, K. Sridharan, A. Chen, and J.R. Conrad, Mater. Res. Bull. 29, 827 (1994).10.1016/0025-5408(94)90002-7 ↗
9. K. Baba and R. Hatada, Surf. Coatings Technol. 84, 429 (1996).10.1016/S0257-8972(95)02799-8 ↗
10. V.M. Dubin and Y. Shacham-Diamand, J. Electrochem. Soc. 144, 898 (1997).10.1149/1.1837505 ↗
11. Y. Shacham-Diamand and S. Lopatin, Microelectron. Eng. 37–38, 77 (1997).10.1016/S0167-9317(97)00096-8 ↗
12. Y. Shacham-Diamand and V.M. Dubin, Microelectron. Eng. 33, 47 (1997).10.1016/S0167-9317(96)00030-5 ↗
13. Y. Shacham-Diamand and S. Lopatin, Electrochimica Acta 44, 3639 (1999).10.1016/S0013-4686(99)00067-5 ↗
14. Y. Shacham-Diamand and Y. Sverdlov, Microelectron. Eng. 50, 525 (2000).10.1016/S0167-9317(99)00323-8 ↗
15. Y. Shacham-Diamand, Y. Sverdlov, and N. Petrov, J. Electrochem. Soc. 148, c162 (2001).10.1149/1.1346605 ↗
16. A. Kohn, M. Eizenberg, Y. Shacham-Diamand, and Y. Sverdlov, Mater. Sci. Eng. A302, 18 (2001).10.1016/S0921-5093(00)01348-4 ↗
17. M. Paunovic and M. Schlesinger, Fundamentals of Electrochemical Deposition (New York: John Wiley & Sons, Inc., 1998), pp. 157–158.
18. M.A. Nicolet, Thin Solid Films 19, 52 (1978).
19. A.F. Cotton and G. Wilkinson, Advanced Inorganic Chemistry, 5th ed. (New York: John Wiley & Sons, Inc., 1988), pp. 686–689.
20. H.L.T. Mobley and R.P. Hausinger, Microbiol. Rev. 53, 85 (1989).10.1128/MMBR.53.1.85-108.1989 ↗
21. M. Schlesinger and M. Paunovic, Modern Electroplating (New York: John Wiley & Sons, Inc. 2000), pp. 676–679.
22. Y. Wu, W.C. Chen, H.P. Fong, C.C. Wan, and Y.Y. Wang, J. Electrochem. Soc. 149, G309 (2002).10.1149/1.1464885 ↗
23. E.D. D’Ottavio, U.S. patent 3,532,518 (1970);
24. U.S. patent 3,650,913 (1972).
25. T. Osaka, H. Takematsu, and K Nihei, J. Electrochem. Soc. 148, c162 (2001).10.1149/1.1399276 ↗
26. C.L. Lee, C.C. Wan, and Y.Y. Wang, Adv. Funct. Mater. 11, 344 (2001).10.1002/1616-3028(200110)11:5<344::AID-ADFM344>3.0.CO;2-7 ↗
27. M. Matsuoka, S. Imanishi, and T. Hayashi, Plating Surf. Finishing 76, 54 (1989).
28. J.E.A.M., J. Electrochem. Soc. 11, 395 (1980).
29. I. Koiwa, M. Usudo, K. Yamada, and T. Osaka, J. Electrochem. Soc. 135, 718 (1988).10.1149/1.2095730 ↗
30. E.J. Podlaha and D. Landolt, J. Electrochem. Soc. 143, 885 (1996).10.1149/1.1836553 ↗
31. J.C. Lin and C. Lee, J. Electrochem. Soc. 146, 3466 (1999).10.1149/1.1392497 ↗