Effects of dimple and metal coating on interfacial adhesion in plastic packages
Source abstract
Abstract
This paper reports on the effects of dimple and metallic coating of the Cu-alloy lead frame on interfacial adhesion with an epoxy-molding compound. Round dimples of varying number are introduced on one side of the lead frame by chemical etching. The plating materials studied include bare-Cu alloy and microetched Cu, Ag, Ni, Pd/Ni, and Au/Ni coatings. The surface characteristics, such as wettability, surface roughness, and element compositions, were evaluated based on several characterization tools, which, in turn, are correlated with adhesion performance. The dimples enhanced the interfacial-bond strengths through improved mechanical interlocking of the molding compound, depending on the type of coating. The improvement was much more significant for the coatings with inherently weak interfacial adhesion (e.g., microetched Cu and Ni coating) than those with inherently strong adhesion characteristics (e.g., Au and Pd coatings). The wettability of the metal surface represented by the surface energy or interfacial energy played a dominant role in the resulting interfacial adhesion. Elemental analysis of the fracture surface indicates that the silicon content had roughly a linear relationship with the interfacial-bond strengths for different coatings. The surface roughness was insensitive to the interfacial-adhesion performance. The silicon content measured from the lead-frame fracture surface was shown to directly correlate to the interfacial-bond strength. Higher silicon content was a reflection of larger surface-area coverage by the molding compound associated with cohesive failure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Surface Modification and Superhydrophobicity · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. L.T. Nguyen, ASME J. Electron. Packaging 115, 346 (1993).10.1115/1.2909343 ↗
2. I. Fukuzawa, S. Ishiguro, and S. Nanbu, Int. Reliability Physics Symp. (Piscataway, NJ: IEEE, 1985), pp. 192–197.
3. S. Kuroki and K. Oota, 39th Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 1989), pp. 885–890.
4. N. Mogi and H. Yasuda, 42nd Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 1992), pp. 1023–1029.
5. S. Asai, U. Satura, and M. Tobita, J. Appl. Polym. Sci. 51, 1945 (1994).10.1002/app.1994.070511111 ↗
6. T. Nishioka, M. Nagasawa, K. Igarshi, M. Kohmoto, and S. Ito, 40th Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 1990), pp. 625–631.
7. T.O. Steiner and D. Suhl, IEEE Trans. Comp. Hybrids Manuf. Technol. 10, 209 (1987).10.1109/TCHMT.1987.1134724 ↗
8. R. Lin, E. Blackshear, G. May, G. Hamilton, and D. Kirby, 7th Ann. Conf. of International Electronic Packaging Society (1988), pp. 995–1010.
9. L.T. Nguyen and M. Michael, 42nd Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 1992), pp. 930–938.
10. S. Altimari, S. Golwalkar, P. Boysan, and R. Foehringer, 42nd Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 1992), pp. 945–950.
11. O. Yoshioka, N. Okabe, S. Nagayana, G. Murakami, and R. Yamagishi, 39th Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 1989), pp. 464–471.
12. S. Kim, IEEE Trans. Comp. Hybrids Manuf. Technol. 14, 809 (1991).10.1109/33.105138 ↗
13. S. Yi, C.Y. Yue, H. Hsieh, L. Fong, and S.K. Lahiri, J. Adhes. Sci. Technol. 13, 789 (1999).10.1163/156856199X01018 ↗
14. S. Yi, J.K. Kim, C.Y. Yue, and J.H. Hsieh, J. Adhes. 73, 1 (2000).10.1080/00218460008029294 ↗
15. D.C. Abbott, R.M. Brook, N. McLelland, and J.S. Wiley, IEEE Trans. Comp. Hybrids Manuf. Technol. 14, 567 (1991).10.1109/33.83945 ↗
16. S. Wu, J. Adhes. 5, 39 (1973).10.1080/00218467308078437 ↗
17. J. Guzek, H. Azimi, and S. Suresh, IEEE Trans. Comp. Packaing Manuf. Technol. Part A 20, 496 (1997).10.1109/95.650940 ↗
18. G.S. Ganesan, G.L. Lewis, and H.M. Berg, Adv. Electron. Packaging ASME 10, 450 (1995).
19. S.J. Cho, K.W. Paik, and Y.G. Kim, IEEE Trans. Comp. Packaging Manuf. Technol. Part B 20, 167 (1997).
20. C.T. Chong, A. Leslie, L.T. Beng, and C. Lee, 45th Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 1995), pp. 463–469.
21. H. Ohsuga, H. Suzuki, T. Aihara, and T. Hamano, 44th Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 1994), pp. 141–146.
22. K.C. Chan, T.C. Chai, Y.Z. Yang, and R. Gopalakrishnan, 50th Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 2000), pp. 175–182.