journal article·2006-10

Electrical characteristics for Sn-Ag-Cu solder bump with Ti/Ni/Cu under-bump metallization after temperature cycling tests

T. I. Shih, Y. C. Lin, J. G. Duh, Tom Hsu

Journal of Electronic Materials· Volume 35· Issue 10
Publisher page

Abstract

Lead-free solder bumps have been widely used in current flip-chip technology (FCT) due to environmental issues. Solder joints after temperature cycling tests were employed to investigate the interfacial reaction between the Ti/Ni/Cu under-bump metallization and Sn-Ag-Cu solders. The interfacial morphology and quantitative analysis of the intermetallic compounds (IMCs) were obtained by electron probe microanalysis (EPMA) and field emission electron probe microanalysis (FE-EPMA). Various types of IMCs such as (Cu1−x,Agx)6Sn5, (Cu1−y,Agy)3Sn, and (Ag1−z,Cuz)3Sn were observed. In addition to conventional I–V measurements by a special sample preparation technique, a scanning electron microscope (SEM) internal probing system was introduced to evaluate the electrical characteristics in the IMCs after various test conditions. The electrical data would be correlated to microstructural evolution due to the interfacial reaction between the solder and under-bump metallurgy (UBM). This study demonstrated the successful employment of an internal nanoprobing approach, which would help further understanding of the electrical behavior within an IMC layer in the solder/UBM assembly.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. L.F. Miller, IBM J. Res. Dev. 13, 239 (1969).10.1147/rd.133.0239 ↗
2. K.S. Bae and S.J. Kim, J. Mater. Res. 17, 743 (2002).10.1557/JMR.2002.0108 ↗
3. D.R. Frear, J.W. Jang, J.K. Lin, and C. Zang, JOM 53, 28 (2001).10.1007/s11837-001-0099-3 ↗
4. B.L. Young, J.G. Duh, and B.S. Chiou, J. Electron. Mater. 30, 543 (2001).10.1007/s11664-001-0096-x ↗
5. M. McCormack, S. Jin, G.W. Kammlott, and H.S. Chen, Appl. Phys. Lett. 63, 15 (1993).10.1063/1.109734 ↗
6. J.W. Jang, A.P. De Silva, J.K. Lin, and D.R. Frear, J. Mater. Res. 19, 1826 (2004).10.1557/JMR.2004.0235 ↗
7. H.W. Miao and J.G. Duh, Mater. Chem. Phys. 71, 255 (2001).10.1016/S0254-0584(01)00298-X ↗
8. J.H.L. Pang, T.H. Low, B.S. Xiong, L.H. Xu, and C.C. Neo, Thin Solid Films 370, 462 (2004).
9. J.H.L. Pang, T.H. Low, B.S. Xiong, and F.X. Che, Proc. IEEE, 2003 Electronics Packaging Technology Conf. (Piscataway, NJ: IEEE, 2003), pp. 470–478.
10. F.A. Stam and E. Davitt, Microelectron. Reliab. 41, 1815 (2001).10.1016/S0026-2714(01)00087-7 ↗
11. S.K. Kang, R.S. Rai, and S. Purrshothaman, J. Electron. Mater. 25, 1113 (1996).10.1007/BF02659912 ↗
12. B.L. Young and J.G. Duh, J. Electron. Mater. 30, 878 (2001).10.1007/s11664-001-0075-2 ↗
13. C.S. Huang, J.H. Yeh, B.L. Young, and J.G. Duh, J. Electron. Mater. 31, 1230 (2002).10.1007/s11664-002-0014-x ↗
14. J.W. Nah and K.W. Paik, IEEE Trans. Compon. Packaging Technol. 25, 32 (2002).10.1109/6144.991172 ↗
15. J.H. Lee, J.W. Park, D.H. Shin, and Y.S. Kim, J. Electron. Mater. 33, 28 (2004).10.1007/s11664-004-0290-8 ↗
16. G.Y. Jang and J.G. Duh, J. Electron. Mater. 34, 68 (2005).10.1007/s11664-005-0182-6 ↗
17. Y.C. Lin, J.G. Duh, and B.S. Chiou, J. Electron. Mater. 35, 7 (2006).10.1007/s11664-006-0177-y ↗
18. J.I. Goldstein, Scanning Electron Microscopy and X-ray Microanalysis (New York: Plenum Press, 1992), pp. 306–330.10.1007/978-1-4613-0491-3 ↗
19. G.K. Reeves and H.B. Harrison, IEEE Electron Dev. Lett. EDL-3, 111 (1982).10.1109/EDL.1982.25502 ↗