journal article·2008-07

Effects of Rare-Earth Addition on Properties and Microstructure of Lead-Free Solder Balls

Yang Yu, Zhidong Xia, Fu Guo, Yaowu Shi

Journal of Electronic Materials· Volume 37· Issue 7
Publisher page

Abstract

In the present work, lead-free solder balls were manufactured by a uniform droplet spray (UDS) method. The solder used to produce solder balls was based on the Sn-3.8Ag-0.7Cu alloy. Different amounts of cerium-based mixed rare-earth (RE) elements were added into the Sn-3.8Ag-0.7Cu solder alloy in order to examine the effects of small amounts of RE additions on the physical properties, microstructure, and surface smoothness of the solder balls. Results show that a small amount of RE addition has no obvious effect on the melting temperature, but it decreases the nucleation undercooling degree. Moreover, a small amount of RE addition (<0.25 wt.%) can improve the surface smoothness of the solder balls. However, when the RE was added up to 0.5 wt.%, the surface smoothness of the solder balls was deteriorated. From observations of the microstructure of the solder balls, it is obvious that the RE addition affects solidification behavior, and as a result, the surface smoothness of the solder balls.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Intermetallics and Advanced Alloy Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. M.D. Ries, D.R. Banks and D.P. Watson, IBM J. Res. Dev. 37, 597 (1993)10.1147/rd.375.0597 ↗
2. J.H. Chun and C.H. Passow, U.S. patent 5,266,098 (1993).
3. J. Tang, G.B. Hess, M.D. Muszynski, and T.S. Goehring, U.S. patent 5,891,212 (1999).
4. M. Orme-Marmerelis and R.F. Smith, U.S. patent 6,491,737 (2002).
5. J.H. Lee, B.C. Moon, J. Lee, J.T. Moon, C.R. Oh, and J.G. Nam, U.S. patent 6,312,498 (2003).
6. J.-C. Rocha Alvarez, Master thesis, MIT (1997).
7. A.A. Tseng, M.H. Lee and B. Zhao, Trans. ASME 123, 74 (2001)10.1115/1.1330269 ↗
8. B. Kempf, M. Graff, O. Hutin and M. Rettenmayr, J. Electron. Mater. 31, 1270 (2002) doi: 10.1007/s11664-002-0020-z10.1007/s11664-002-0020-z ↗
9. Z.D. Xia, Z.G. Chen, Y.W. Shi, N. Mu, N. Sun, J. Electron. Mater. 31, 564 (2002) doi: 10.1007/s11664-002-0126-310.1007/s11664-002-0126-3 ↗
10. Z.G. Chen, Y.W. Shi, Z.D. Xia, Y.F. Yan, J. Electron. Mater. 32, 235 (2003) doi: 10.1007/s11664-003-0215-y10.1007/s11664-003-0215-y ↗
11. Z.G. Chen, Y.W. Shi, Z.D. Xia, Y.F. Yan, J. Electron. Mater. 33, 964 (2004) doi: 10.1007/s11664-004-0023-z10.1007/s11664-004-0023-z ↗
12. B. Li, Y. W. Shi, Y.P. Lei, F. Guo, Z.D. Xia, J. Electron. Mater. 34, 217 (2005) doi: 10.1007/s11664-005-0207-110.1007/s11664-005-0207-1 ↗
13. M.A. Dudek, R.S. Sidhu, N. Chawla, M. Renavikar, J. Electron. Mater. 35, 2088 (2006) doi: 10.1007/s11664-006-0318-310.1007/s11664-006-0318-3 ↗
14. J.H. Perepezko, J.L. Sebright, P.G. Hockel, G. Wilde, Mat. Sci. Eng. A-Struct. A326, 144 (2002)10.1016/S0921-5093(01)01430-7 ↗
15. J.H. Perepezko, Mat. Sci. Eng. A Struct. A226–A228, 374 (1997)10.1016/S0921-5093(96)10647-X ↗