journal article·2006-05

Interaction of intermetallic compound formation in Cu/SnAgCu/NiAu sandwich solder joints

Yanghua Xia, Chuanyan Lu, Junling Chang, Xiaoming Xie

Journal of Electronic Materials· Volume 35· Issue 5
Publisher page

Abstract

The interaction between Cu/solder interface and solder/Ni interface at a Cu/SnAgCu/NiAu sandwich solder joint with various surface finishes and solder heights was investigated. The interfacial microstructure and composition of intermetallic compounds (IMCs) were characterized by a scanning electron microscope (SEM) equipped with energy-dispersive x-ray spectroscopy (EDX). The phase structure of IMC was identified by x-ray diffraction (XRD). It is found that ternary (Cu,Ni)6Sn5 IMCs form at both interfaces. The composition, thickness, and morphology of the ternary IMCs depend not only on the interface itself, but also on the opposite interface. That is to say, strong coupling effects exist between the two interfaces. Lattice parameters of (Cu,Ni)6Sn5 shrink with increasing Ni content, in agreement with Vegard’s law. The mechanism of ternary IMC formation and interface coupling effects are discussed in this paper.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. H.T. Lee, M.H. Chen, and H.M. Jao,Mater. Sci. Eng. A 358, 134 (2003).10.1016/S0921-5093(03)00277-6 ↗
2. G.Y. Li and B.L. Chen,IEEE Trans. Compon. Packaging Technol. 26, 651 (2003).10.1109/TCAPT.2003.817860 ↗
3. K.S. Kim, S.H. Huh, and K. Suganuma,J. Alloy Compounds 352, 226 (2003).10.1016/S0925-8388(02)01166-0 ↗
4. M. Li, F. Zhang, W.T. Chen, K. Zeng, K.N. Tu, and H. Balkan,J. Mater. Res. 17, 1612 (2002).10.1557/JMR.2002.0239 ↗
5. D.H. Kim and P. Elenius, inElectronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2001), pp. 681–686.
6. K.S. Kim, S.H. Huh, and K. Suganuma,Mater. Sci. Eng., A 333, 106 (2002).10.1016/S0921-5093(01)01828-7 ↗
7. B. Salam, C. Virseda, and H. Da,Soldering SMT 16, 27 (2004).
8. K. Zeng, V. Vuorinen, and J.K. Kivilahti,IEEE Trans. Electron. Packaging Manufacturing 25, 162 (2002).10.1109/TEPM.2002.801648 ↗
9. K.N. Tu and R.D. Thompson,Acta Metall. 30, 947 (1982).10.1016/0001-6160(82)90201-2 ↗
10. K. Suganuma and Y. Nakamura,J. Jpn. Inst. Met. 59, 1299 (1995).10.2320/jinstmet1952.59.12_1299 ↗
11. S.W. Chen and Y.W. Yen,J. Electron. Mater. 28, 1203 (1999).10.1007/s11664-999-0158-z ↗
12. K. Zeng and K.N. Tu,Mater. Sci. Eng. R 38, 55 (2002).10.1016/S0927-796X(02)00007-4 ↗
13. K.N. Tu, A.M. Guask, and M. Li,J. Appl. Phys. 93, 1335 (2003).10.1063/1.1517165 ↗
14. F. Zhang, M. Li, C.C. Chum, and C.H. Tung,J. Mater. Res. 18, 1333 (2003).10.1557/JMR.2003.0183 ↗
15. S.J. Wang and C.Y. Liu,J. Electron. Mater. 32, 1303 (2003).10.1007/s11664-003-0027-0 ↗
16. T.L. Shao, T.S. Chen, Y.M. Huang, and C. Chen,J. Mater. Res. 19, 3654 (2004).10.1557/JMR.2004.0478 ↗
17. L.S. Yee, J. Chen, J. Zeng, R. Jay (Paper presented at SMTA Pan Pacific Microelectronics Symp., February 10, 2004).
18. R. Ludwig, N.C. Lee, C.L. Fan, and Y. Zhang,Soldering SMT 14, 19 (2002).
19. A.R. Denton and N.W. Ashcroft,Phys. Rev. A. 43, 3161 (1991).10.1103/PhysRevA.43.3161 ↗
20. N.N. Greenwood and A. Earnshaw,Chemistry of the Elements (Oxford, United Kingdom: Butterworth, 1998), pp. 1144–1200.
21. R.Z.F. Pinizzotto et al.,J. Electron. Mater. 22, 355 (1993).
22. K.H. Prakash and T. Sritharan,Acta Mater. 49, 2481 (2001).10.1016/S1359-6454(01)00146-X ↗
23. K.Y. Lee, M. Li, D.R. Olsen, W.T. Chen, B.T.C. Tan and S. Mhaisalkar,Electronic Components and Technology Conf. (Piscataway, NJ: IEEE 2001), pp. 478–485.
24. J.Y. Tsai, Y.C. Chu, C.M. Tsai, and C.R. Kao,J. Electron. Mater. 32, 1203 (2003).10.1007/s11664-003-0012-7 ↗
25. K.Y. Lee and M. Li,J. Electron. Mater. 32, 906 (2003).10.1007/s11664-003-0208-x ↗
26. C.E. Ho, R.Y. Tsai, Y.L. Lin, and C.R. Kao,J. Electron. Mater. 31, 584 (2002).10.1007/s11664-002-0129-0 ↗
27. C.E. Ho, Y.L. Lin, and C.R. Kao,Chem. Mater. 14, 949 (2002).10.1021/cm010639h ↗
28. D.Q. Yu, L. Wang, C.M.L. Wu, and C.M.T. Law,J. Alloy Compounds 389, 153 (1985).
29. J.L. Chang, Y.H. Xia, and X.M. Xie,High Density Package Proc. (Piscataway, NJ: IEEE, 2004), p. 66.
30. W.T. Chen, C.E. Ho, and C.R. Kao,J. Mater. Res. 17, 263 (2002).10.1557/JMR.2002.0036 ↗
31. W.G. Bader,Welding J. Res. Suppl. 28, 551 (1969).
32. K.N. Tu, T.Y. Lee, and J.W. Jang,J. Appl. Phys. 89, 4843 (2001).10.1063/1.1357469 ↗
33. A. Sharif, Y.C. Chan, and R.A. Islam,Mater. Sci. Eng., B 106, 120 (2004).10.1016/j.mseb.2003.09.003 ↗