journal article·2006-05

Rapid thermal processing of silicon wafers with emissivity patterns

M. Rabus, A. T. Fiory, N. M. Ravindra, P. Frisella, A. Agarwal, T. Sorsch, J. Miner, E. Ferry, F. Klemens, R. Cirelli, W. Mansfield

Journal of Electronic Materials· Volume 35· Issue 5
Publisher page

Abstract

Fabrication of devices and circuits on silicon wafers creates patterns in optical properties, particularly the thermal emissivity and absorptivity, that lead to temperature nonuniformity during rapid thermal processing (RTP) by infrared heating methods. The work reported in this paper compares the effect of emissivity test patterns on wafers heated by two RTP methods: (1) a steadystate furnace or (2) arrays of incandescent lamps. Method I was found to yield reduced temperature variability, attributable to smaller temperature differences between the wafer and heat source. The temperature was determined by monitoring test processes involving either the device side or the reverse side of the wafer. These include electrical activiation of implanted dopants after rapid thermal annealing (RTA) or growth of oxide films by rapid thermal oxidation (RTO). Temperature variation data are compared with a model of radiant heating of patterned wafers in RTP systems.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Silicon and Solar Cell Technologies · Thin-Film Transistor Technologies · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. A.T. Fiory,8th IEEE Intern. Conf. Adv. Thermal Processing of Semiconductors RTP (Piscataway, NJ: 2000), pp. 15–25.
2. A.T. Fiory, inEncyclopedia of Materials: Science and Technology (New York: Pergamon Press, Elsevier Science, 2001), pp. 8009–8017.10.1016/B0-08-043152-6/01440-6 ↗
3. A.T. Fiory,J. Mater. 57, 21 (1985).
4. P. Vandenabelle, K. Maex, and R. De Keersmacker,Mater. Res. Soc. Symp. Proc. 146, 149 (1989).10.1557/PROC-146-149 ↗
5. R. Kakoschke, E. Bußmann, and H. Föll,Appl. Phys. A 50, 141150 (1990).10.1007/BF00343409 ↗
6. J.P. Hebb and K.F. Jensen,J. Electrochem. Soc. 143, 1142 (1996).10.1149/1.1836598 ↗
7. Z. Nényei, G. Wein, W. Lerch, C. Grunwald, J. Gelpey, and S. Wallmuller,5th Intern. Conf. Adv. Thermal Processing of Semiconductors RTP (1997), pp. 35–43.
8. L.H. Nguyen, W. Dietl, J. Nieß, and Z. Nényei,7th Intern. Conf. Adv. Thermal Processing of Semiconductors RTP (1999), pp. 26–38.
9. Z. Nényei, J. Niess, S. Buschbaum, K. Meyer, W. Dietle, R. Berger, S. Miethaner, H. Gruber, R. Wahlich, and S. Chamberlain,Electrochem. Soc. Proc. PV 2002-11, 261 (2002).
10. J. Niess, R. Berger, P.J. Timans, and Z. Nényei,10th IEEE Intern. Conf. Adv. Thermal Processing of Semiconductors RTP (Piscataway, NJ: 2002), pp. 49–57.
11. J. Neiss, Z. Nényei, W. Lerch, and S. Paul,Electrochem. Soc. Proc. PV-2003-14, 11 (2003).
12. J. Hebb,11th IEEE Intern. Conf. Adv. Thermal Processing of Semiconductors RTP (Piscataway, NJ: 2003), pp. 8009–8017.
13. N.M. Ravindra, K. Ravindra, S. Mahendra, B. Sopori, and A.T. Fiory,J. Electron. Mater. 32, 1052 (2003).10.1007/s11664-003-0088-0 ↗
14. J.P. Hebb and K.F. Jensen,Multi-Rad User’s Manual (Cambridge, MA: MIT, 1997), pp. i-iii, 1–19.
15. M. Rabus (M.S. Thesis, New Jersey Institute of Technology, 1985).
16. A.T. Fiory,J. Electron. Mater. 28, 1358 (1999).10.1007/s11664-999-0122-y ↗
17. A.T. Fiory and K.K. Bourdelle,Appl. Phys. Lett. 74, 2658 (1999).10.1063/1.123929 ↗
18. C.J. Glassbrenner and G.A. Slack,Phys. Rev. 134, A1058 (1964).10.1103/PhysRev.134.A1058 ↗