Effect of multistep annealing on mechanical and surface properties of electroplated Cu thin films
Source abstract
Abstract
Electroplated (EP) Cu films demonstrate a microstructural transition at room temperature, known as self-annealing, that involves grain growth and texture changes. In this paper, we have investigated the annealing behavior of EP Cu films grown on a Cu seed layer deposited on top of a TaN barrier layer. A grazing incident x-ray diffraction (GIXRD) pattern shows stronger x-ray reflections form Cu (111) and (220) planes but weaker reflections from (200), (311), and (222) planes in all the EP Cu samples. Nanoindentation was performed on all the samples using the continuous stiffness measurement technique. The elastic modulus varied from 121 GPa to 132 GPa, while the hardness varied from 1 GPa to 1.3 GPa, depending on the annealing conditions. The surface morphology and roughness of the Cu films were characterized using atomic force microscopy (AFM). The tribological properties of the copper films were measured using the Bench Top chemical mechanical polishing (CMP) tester (CETR, Inc., Campbell, CA). Nanoindentation was performed on the samples after CMP, and an increase in hardness and modulus was observed. This may be attributed to the work hardening of the Cu films during CMP.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Copper Interconnects and Reliability · Electrodeposition and Electroless Coatings
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. S.M. Merchant, S.H. Kang, M. Sanganeria, B. van Schravendijk, and T. Mountsier, JOM 53, 43 (2001).10.1007/s11837-001-0103-y ↗
2. J. Tao, N.W. Cheung, and C. Hu, IEEE Electron Device Lett. 14, 249 (1993).10.1109/55.215183 ↗
3. H.K. Kang, I. Asano, C. Ryu, and S.S. Wong, Proc. 10th Int. VLSI Multilevel Interconnection Conf. (Tampa, FL: VLSI Multilevel Interconnection Conference, 1993), pp. 223–229.
4. K.P. Rodbell, E.G. Colgan, and C.K. Hu, Proc. Advanced Metallization for Devices and Circuits—Science, Technology, and Manufacturability (Pittsburgh, PA: Materials Research Society, 1994), pp. 59–70.
5. S. Lagrange, S.H. Brongersma, M. Judelewicz, A. Saerens, I. Vervoort, E. Richard, R. Palmans, and K. Maex, Microelectron. Eng. 50, 449 (2000).10.1016/S0167-9317(99)00314-7 ↗
6. J.M. Harper, C. Cabral, Jr., P.C. Andricacos, L. Gignac, I.C. Noyan, K.P. Rodbell, and C.K. Hu, J. Appl. Phys. 86, 2516 (1999).10.1063/1.371086 ↗
7. A. Furuya, Y. Oshita, and A. Ogura, J. Vac. Sci. Technol. A 18, 2854 (2000).10.1116/1.1310653 ↗
8. C. Lingk, M.E. Gross, and W.L. Brown, J. Appl. Phys. 87, 2232 (2000).10.1063/1.372166 ↗
9. S.H. Brongersma, E. Richard, I. Vervoort, H. Bender, W. Vandervorst, S. Lagrange, G. Beyer, and K. Maex, J. Appl. Phys. 86, 3642 (1999).10.1063/1.371272 ↗
10. L. Vanasupa, Y-C. Joo, P.R. Besser, and S. Pramanick, J. Appl. Phys. 85, 2583 (1999).10.1063/1.369624 ↗
11. C-Y. Yang, J.S. Jeng, and J.S. Chen, Thin Solid Films 420–421, 398 (2002).10.1016/S0040-6090(02)00810-6 ↗
12. M.T. Perez-Prado and J.J. Vlassak, Scripta Mater. 47, 817 (2002).10.1016/S1359-6462(02)00308-1 ↗
13. H. Lee, S.S. Wong, and S.D. Lopatin, J. Appl. Phys. 93, 3796 (2003).10.1063/1.1555274 ↗
14. K. Ueno, T. Ritzdorf, and S. Grace, J. Appl. Phys. 86, 4930 (1999).10.1063/1.371462 ↗
15. C. Lingk and M.E. Gross, J. Appl. Phys. 84, 5547 (1998).10.1063/1.368856 ↗
16. W.H. The, L.T. Koh, S.M. Chen, J. Xie, C.Y. Li, and P.D. Foo, Microelectron. J. 32, 579 (2001).10.1016/S0026-2692(01)00035-0 ↗
17. J. Proost, T. Hirato, T. Furuhara, K. Maex, and J.-P. Celis, J. Appl. Phys. 87, 2792 (2000).10.1063/1.372258 ↗
18. T.-H. Fang and W.-J. Chang, Microelectron. Eng. 65, 231 (2003).10.1016/S0167-9317(02)00885-7 ↗
19. S.H. Kang, Y.S. Obeng, M.A. Decker, M. Oh, S.M. Merchant, S.K. Karthikeyan, C.S. Seet, and A.S. Oates, J. Electron. Mater. 30, 1506 (2001).10.1007/s11664-001-0166-0 ↗
20. A.K. Sikder, I.M. Irfan, A. Kumar, and J.M. Anthony, J. Electron. Mater. 30, 1527 (2001).10.1007/s11664-001-0169-x ↗
21. A.K. Sikder, F. Giglio, J. Wood, A. Kumar, and J.M. Anthony, J. Electron. Mater. 30, 1522 (2001).
22. M.F. Doerner and W.D. Nix, J. Mater. Res. 1, 601 (1986).10.1557/JMR.1986.0601 ↗