journal article·2006-01

Characterizing metallurgical reaction of Sn3.0Ag0.5Cu composite solder by mechanical alloying with electroless Ni-P/Cu under-bump metallization after various reflow cycles

Li-Yin Hsiao, Szu-Tsung Kao, Jenq-Gong Duh

Journal of Electronic Materials· Volume 35· Issue 1
Publisher page

Abstract

Electroless Ni-P/Cu under-bump metallization (UBM) is widely used in electronics packaging. The Sn3.0Ag0.5Cu lead-free composite solder pastes were produced by a mechanical alloying (MA) process doped with Cu6Sn5 nanoparticles. In this study, the detailed interfacial reaction of Sn3.0Ag0.5Cu composite solders with EN(P)/Cu UBM was investigated after reflow. A field-emission scanning electron microscope (FESEM) was employed to analyze the interfacial morphology and microstructure evolution. The intermetallic compounds (IMCs) formed at the interface between the Sn3.0Ag0.5Cu composite solders and EN(P)/Cu UBM after one and three reflows were mainly (Ni1−x,Cux)3Sn4 and (Cu1−y,Niy)6Sn5. However, only (Ni1−x,Cux)3Sn4 IMC was observed after five reflows. The elemental distribution near the interfacial region was evaluated by an electron probe microanalyzer (EPMA) as well as field-emission electron probe microanalyzer (FE-EPMA). Based on the observation and characterization by FESEM, a EPMA, and an FE-EPMA, the reaction mechanism of interfacial phase transformation between Sn3.0Ag0.5Cu composite solders and EN(P)/Cu UBM after various reflow cycles was discussed and proposed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. M.E. Loomans and M.E. Fine, Metall. Mater. Trans. A 31A, 1155 (2000).10.1007/s11661-000-0111-5 ↗
2. C. Tanner, International Workshop on Lead- and Halide-Free Electronics, Semicon Europa, Paper K (2000).
3. K. Nimmo, International Workshop on Lead- and Halide-Free Electronics, Semicon Europa, Paper E (2000).
4. T.M. Korhonen, P. Su, S.J. Hong, M.A. Korhonen, and C.Y. Li, J. Electron. Mater. 29, 1194 (2000).10.1007/s11664-000-0012-9 ↗
5. B. Kim and T. Ritzdorf, J. Electrochem. Soc. 150, C53 (2003).10.1149/1.1530153 ↗
6. M.L. Huang, C.M.L. Wu, and J.K.L. Lai, J. Mater. Sci.: Mater. Electron. 11, 57 (2000).
7. C.M.L. Wu, M.L. Huang, J.K.L. Lai, and Y.C. Chan, J. Electron. Mater. 29, 1015 (2000).10.1007/s11664-000-0166-5 ↗
8. M.L. Huang, C.M.L. Wu, J.K.L. Lai, and Y.C. Chan, J. Electron. Mater. 29, 1021 (2000).10.1007/s11664-000-0167-4 ↗
9. H.L. Lai and J.G. Duh, J. Electron. Mater. 32, 215 (2003).10.1007/s11664-003-0212-1 ↗
10. L.Y. Hsiao and J.G. Duh, J. Electrochem. Soc. 152, J105 (2005).10.1149/1.1954928 ↗
11. Y.D. Jeon, S. Nieland, A. Ostmann, H. Reichl, and K.W. Paik, J. Electron. Mater. 32, 548 (2003).10.1007/s11664-003-0141-z ↗
12. J.H. Lee, D. Park, J.T. Moon, Y.H. Lee, D.H. Shin, and Y.S. Kim, J. Electron. Mater. 29, 1264 (2000).10.1007/s11664-000-0022-7 ↗
13. D. Lin, G.X. Wang, T.S. Srivatsan, M.A. Hajri, and M. Petraroli, Mater. Lett. 53, 333 (2002).10.1016/S0167-577X(01)00503-1 ↗
14. S.T. Kao and J.G. Duh, J. Electron. Mater. 33, 1445 (2004).10.1007/s11664-004-0085-y ↗
15. J.W. Jang, D.R. Frear, T.Y. Lee, and K.N. Tu, J. Appl. Phys. 88, 6359 (2000).10.1063/1.1321787 ↗
16. C.Y. Lee and K.L. Lin, Thin Solid Films 249, 201 (1994).10.1016/0040-6090(94)90761-7 ↗
17. J.W. Jang, P.G. Kim, K.N. Tu, D.R. Frear, and P. Thompson, J. Appl. Phys. 85, 8456 (1999).10.1063/1.370627 ↗
18. M.O. Alam, Y.C. Chan, and K.C. Hung, Microelectron. Reliab. 43, 2065 (2002).
19. J.I. Goldstein, D.E. Newbury, D.C. Joy, C.E. Lyman, P. Echlin, E. Lifshin, L. Sawyer, and J.R. Michael, Scanning Electron Microscopy and X-Ray Microanalysis (New York: Plenum Press, 2003), pp. 391–420.10.1007/978-1-4615-0215-9_9 ↗
20. G.Y. Jang, C.S. Huang, L.Y. Hsiao, J.G. Duh, and H. Takahashi, J. Electron. Mater. 33, 1118 (2004).10.1007/s11664-004-0113-y ↗
21. K.S. Kim, S.H. Huh, and K. Suganuma, J. Alloys Compounds 352, 226 (2003).10.1016/S0925-8388(02)01166-0 ↗
22. C.Y. Li and J.G. Duh, J. Mater. Res., 20, 3118 (2005).10.1557/JMR.2005.0391 ↗
23. S.J. Wang and C.Y. Liu, Scripta Mater. 49, 813 (2003).10.1016/S1359-6462(03)00486-X ↗