Mechanical and Electrical Properties of Cu/Sn-3.5Ag/Cu Ball Grid Array (BGA) Solder Joints after Multiple Reflows
Source abstract
Abstract
The microstructural evolution, die shear strength, and electrical resistivity of Cu/Sn-3.5Ag (wt.%)/Cu ball grid array (BGA) solder joints were investigated after 1 to 10 reflows using scanning electron microscopy (SEM), transmission electron microscopy (TEM), electron probe microanalysis (EPMA), bonding testing, and a four-point probe station. A Cu6Sn5 intermetallic compound (IMC) was formed at both the upper and lower interfaces after one reflow. The IMC thickness increased at the lower interface with increasing reflow number, whereas the IMC morphology and thickness remained virtually unchanged at the upper interface, irrespective of the reflow number. The amount of Cu6Sn5 IMC contained in the solder ball increased with increasing reflow number. These microstructural evolutions with increasing reflow number strongly affected the mechanical and electrical properties of the solder joint.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. M. Bigas, E. Cabrija, Microelectron. Eng. 83, 399 (2006)10.1016/j.mee.2005.11.001 ↗
2. M. Abtew, G. Selvaduray, Mater. Sci. Eng. R 27, 95 (2000)10.1016/S0927-796X(00)00010-3 ↗
3. H. Nayeb-Hashemi, P. Yang, Int. J. Fatigue 23, 325 (2001)10.1016/S0142-1123(01)00144-X ↗
4. K.N. Tu, K. Zeng, Mater. Sci. Eng. R 34, 1 (2001)10.1016/S0927-796X(01)00029-8 ↗
5. J.M. Koo, S.B. Jung, Microelectron. Eng. 82, 569 (2005)10.1016/j.mee.2005.07.057 ↗
6. J.M. Koo, S.B. Jung, J. Electron. Mater. 34, 1565 (2005)10.1007/s11664-005-0166-6 ↗
7. J.M. Koo, Y.H. Lee, S.K. Kim, M.Y. Jeong, S.B. Jung, Key Eng. Mat. 297–300, 801 (2005)10.4028/www.scientific.net/KEM.297-300.801 ↗
8. D.R. Frear, S.N. Burchett, H.S. Morgan, J.H. Lau, The Mechanics of Solder Alloy Interconnections, (New York: Van Nostrand Reinhold, 1994), p. 60
9. T. Laurila, V. Vuorinen, J.K. Kivilahti, Mater. Sci. Eng. R 49, 1 (2005)10.1016/j.mser.2005.03.001 ↗
10. J.W. Yoon, Y.H. Lee, D.G. Kim, H.B. Kang, S.J. Suh, C.W. Yang, C.B. Lee, J.M. Jung, C.S. Yoo, S.B. Jung, J. Alloys Compd. 381, 151 (2004)10.1016/j.jallcom.2004.03.076 ↗
11. C.R. Barrett, W.D. Nix, A.S. Tetelman, The Principles of Engineering Materials, (Englewood Cliffs, New Jersey: Prentice-Hall, 1973), pp. 386–396
12. K.W. Moon, W.J. Boettinger, J. Electron. Mater. 29, 1122 (2000)10.1007/s11664-000-0003-x ↗
13. T.B. Massalski, H. Okamoto, P.R. Subramanian, L. Kacprzak, Binary Alloy Phase Diagram, 2nd ed. (Materials Park, OH: ASM International, 1990)
14. J.M. Koo, Y.H. Lee, S.K. Kim, M.Y. Jeong, S.B. Jung, Key Eng Mat. 297–300, 801–806 (2005)10.4028/www.scientific.net/KEM.297-300.801 ↗
15. D. Brandon, W.D. Kaplan, Joining Process, (New York: Wiley, 1997)
16. ASM Handbook, 10th ed. (Materials Park, OH: ASM International, 1990)