Three-Dimensional Thermoelectrical Simulation in Flip-Chip Solder Joints with Thick Underbump Metallizations during Accelerated Electromigration Testing
Source abstract
Abstract
In flip-chip solder joints, thick Cu and Ni films have been used as under bump metallization (UBM) for Pb-free solders. In addition, electromigration has become a crucial reliability concern for fine-pitch flip-chip solder joints. In this paper, the three-dimensional (3-D) finite element method was employed to simulate the current-density and temperature distributions for the eutectic SnPb solder joints with 5-μm Cu, 10-μm Cu, 25-μm Cu, and 25-μm Ni UBMs. It was found that the thicker the UBM is the lower the maximum current density inside the solder. The maximum current density is 4.37 × 104 A/cm2, 1.69 × 104 A/cm2, 7.54 × 103 A/cm2, and 1.34 × 104 A/cm2, respectively, when the solder joints with the above four UBMs are stressed by 0.567 A. The solder joints with thick UBMs can effectively relieve the current crowding effect inside the solder. In addition, the joint with the thicker Cu UBM has a lower Joule heating effect in the solder. The joint with the 25-μm Ni UBM has the highest Joule heating effect among the four models.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. Glenn R. Blackwell, The Electronic Packaging Handbook (Piscataway, NJ: CRC Press in cooperation with IEEE Press, 2000)
2. International Technology Roadmap for Semiconductors, Assembly and Packaging Section (San Jose, CA: Semiconductor Industry Association, 2003), pp. 4–9
3. K.N. Tu, J. Appl. Phys. 94, 5451 (2003)10.1063/1.1611263 ↗
4. S. Brandenburg, S. Yeh, Proc. Surface Mount Int. Conf. Exhib. (Edina, MN: SMTA, 1998), p. 337
5. C.Y. Liu, Chih Chen, C.N. Liao, K.N. Tu, Appl. Phys. Lett. 75, 58 (1999)10.1063/1.124276 ↗
6. Everett C.C. Yeh, W.J. Choi, K.N. Tu, Appl. Phys. Lett. 80, 4 (2002)10.1063/1.1430852 ↗
7. W.J. Choi, E.C.C. Yeh, K.N. Tu, J. Appl. Phys. 94, 5665 (2003)10.1063/1.1616993 ↗
8. T.L. Shao, S.H. Chiu, Chih Chen, D.J. Yao, C.Y. Hsu, J. Electron. Mater. 33, 1350 (2004)10.1007/s11664-004-0164-0 ↗
9. J.W. Nah, K.W. Paik, J.O. Suh, K.N. Tu, J. Appl. Phys. 94, 7560 (2003)10.1063/1.1628388 ↗
10. T.L. Shao, Y.H. Chen, S.H. Chiu, Chih Chen, J. Appl. Phys. 96, 4518 (2004)10.1063/1.1788837 ↗
11. S.Y. Jang, J. Wolf, W.S. Kwon, and K.W. Paik, Proc. 52th Electronic Components and Technology Conf. (San Diego, CA: IEEE Components, Packaging, and Manufacturing Technology Society, 2002), p. 1213.
12. S.W. Liang, T.L. Shao, Chih Chen, Everett C.C. Yeh, K.N. Tu, J. Mater. Res. 21, 137 (2006)10.1557/jmr.2006.0004 ↗
13. N.F. Mott, H. Jones, The Theory of the Properties of Metals and Alloys (New York, NY: Dover, 1958), p. 242
14. T.L. Shao, S.W. Liang, T.C. Lin, Chih Chen, J. Appl. Phys. 98, 044509 (2005)10.1063/1.2000667 ↗
15. Hua Ye, Cemal Basaran, Douglas Hopkins, Appl. Phys. Lett. 82, 7 (2003)10.1063/1.1534936 ↗
16. J.R. Black, IEEE Trans. Electron Dev. ED-16(4), 338 (1969)10.1109/T-ED.1969.16754 ↗
17. H. Balkan, Proc. 54th Electronic Components and Technology Conf. (Las Vegas, NV: IEEE Components, Packaging, and Manufacturing Technology Society, 2004), p. 893
18. J.D. Wu, C.W. Lee, P.J. Zheng, J.C.B. Lee, S. Li, Proc. 54th Electronic Components and Technology Conf. (Las Vegas, NV: IEEE Components, Packaging, and Manufacturing Technology Society, 2004), p. 961
19. Yi-Shao Lai, Kuo-Ming Chen, Chiu-Wen Lee, Chin-Li Kao, and Yu-Hsiu Shao, Proc. 7th Electronic Packaging Technology Conf. (Singapore: IEEE Components, Packaging, and Manufacturing Technology Society, Singapore, 2005), p. 786
20. S.H. Chiu, T.L. Shao, Chih Chen, D.J. Yao, C.Y. Hsu, Appl. Phys. Lett. 88, 022110 (2006)10.1063/1.2151255 ↗