journal article·2004-11

Stabilizing contact resistance of isotropically conductive adhesives on various metal surfaces by incorporating sacrificial anode materials

Kyoung-Sik Moon, Silvia Liong, Haiying Li, C. P. Wong

Journal of Electronic Materials· Volume 33· Issue 11
Publisher page

Abstract

The contact resistance stability of isotropically conductive adhesives (ICAs) on non-noble metal surfaces under the 85°C/85% relative humidity (RH) aging test was investigated. Previously, we demonstrated that galvanic corrosion has been shown as the main mechanism of the unstable contact resistance of ICAs on non-noble metal surfaces. A sacrificial anode was introduced into the ICA joint for cathodic protection. Zinc, chromium, and magnesium were employed in the ICA formulations as sacrificial anode materials that have much lower electrode-potential values than the metal pad surface, such as tin or tin-based alloys. The effect of particle sizes and loading levels of sacrificial anode materials were studied. Chromium was not as effective in suppressing corrosion as magnesium or zinc because of its strong tendency to self-passivate. The corrosion potential of ICAs was reduced by half with the addition of zinc and magnesium into the ICA formulation. The addition of zinc and magnesium was very effective in controlling galvanic corrosion that takes place in the ICA joints, resulting in stabilized contact resistance of ICAs on Sn, SnPb, and SnAgCu surfaces during the 85°C/85% RH aging test.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Synthesis and properties of polymers · Recycling and Waste Management Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (19)

Show source-provided references
1. J.C. Jagt, IEEE Trans. CPMT: Part A 21, 215 (1998).
2. A.J. Lovinger, J. Adhesion 10, 1 (1979).10.1080/00218467908544607 ↗
3. S. Asai, U. Saruta, M. Tobita, M. Takano, and Y. Miyashita, J. Appl. Polym. Sci. 56, 769 (1995).10.1002/app.1995.070560702 ↗
4. A.O. Ogunjimi, O. Boyle, D.C. Whalley, and D.J. Williams, J. Electron. Manufacturing 2, 109 (1992).10.1142/S0960313192000145 ↗
5. K. Gilleo, Solder. Surf. Mount Technol. 19, 12 (1995).10.1108/eb037885 ↗
6. P.G. Harris, Solder. Surf. Mount Technol. 20, 19 (1995).10.1108/eb037894 ↗
7. J. Liu, ed., Conductive Adhesives for Electronics Packaging (Bristol: Electrochemical Publications, 1999), pp. 2–6.
8. J. Lin, J. Drye, W. Lytle, T. Scharr, R. Subrahmanyan, and R. Sharma, Proc. IEEE 46th Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 1996), pp. 1059–1068.
9. J.C. Jagt, P.J.M. Beric, and G.F.C.M. Lijten, IEEE Trans. CPMT: Part B 18, 292 (1995).
10. M.A. Gaynes, R.H. Lewis, R.F. Saraf, and J.M. Roldan, IEEE Trans. CPMT: Part B 18, 299 (1995).
11. R. Dudek, H. Berek, T. Fritsch, and B. Michel, IEEE Trans. CPMT: Part A 23, 462 (2000).
12. D. Klosterman, L. Li, and J.E. Morris, IEEE Trans. CPMT: Part A 21, 23 (1998).
13. D. Lu, Q.K. Tong, and C.P. Wong, IEEE Trans. CPMT: Part C 22, 228 (1999).
14. D. Lu and C.P. Wong, IEEE Trans. CPMT 23, 620 (2000).
15. Q.K. Tong, G. Fredrickson, R. Kuder, and D. Lu, Proc. 49th Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 1999), pp. 347–352.
16. L. Shreir, Corrosion (New York: Wiley, 1963), pp. 371–393.
17. S. Bradford, Corrosion Control, 2nd ed. (Edmonton: CASTI; Materials Park, OH: ASM International, 2002), pp. 11.17–11.44.
18. H. Takezawa, T. Mitani, T. Kitae, H. Sog, S. Kobayashi, and Y. Bessho, Proc. IEEE 8th Int. Symp. on Advanced Packaging Mater. (New York: IEEE, 2002), pp. 139–143.
19. H. Li, K.S. Moon, and C.P. Wong, Proc. IEEE 53rd Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 2003), pp. 1373–1377.