Compound formation for electroplated Ni and electroless Ni in the under-bump metallurgy with Sn-58Bi solder during aging
Source abstract
Abstract
The Ni-based under-bump metallurgies (UBMs) are of interest because they have a slower reaction rate with Sn-rich solders compared to Cu-based UBMs. In this study, several UBM schemes using Ni as the diffusion barrier are investigated. Joints of Sn-58Bi/Au/electroless nickel (EN)/Cu/Al2O3 and Sn-58Bi/Au/electroplated nickel/Cu/Al2O3 were aged at 110°C and 130°C for 1–25 days to study the interfacial reaction and microstructural evolution. The Sn-Bi solder reacts with the Ni-based multimetallization and forms the ternary Sn-Ni-Bi intermetallic compound (IMC) during aging at 110°C. Compositions of ternary IMC were (78–80)at.%Sn-(12–16)at.%Ni-(5–8)at.%Bi in joints of Sn-58Bi/Au/Ni-5.5wt.%P/Cu, Sn-58Bi/Au/Ni-12wt.%P/Cu, and Sn-58Bi/Au/Ni/Cu. Elevated aging at 130°C accelerates the IMC growth rate and results in the formation of (Ni,Cu)3Sn4 and (Cu,Ni)6Sn5 adjacent to the ternary Sn-Ni-Bi IMC for the Sn-58Bi/Au/Ni-12wt.%P/Cu and Sn-58Bi/Au/Ni/Cu joints, respectively. The Cu content in the (Cu,Ni)6Sn5 IMC is six times that in (Ni,Cu)3Sn4. Electroplated Ni fails to prevent Cu diffusion toward the Ni/solder interface as compared to EN-based joints. Cracks are observed in the Sn-58Bi/Au/Ni-5.5wt.%P/Cu/Al2O3 joint aged at 130°C for 25 days. It is more favorable to employ Ni-12wt.%P for the Sn-58Bi/Au/EN/Cu joint. Electroless nickel, with the higher P content of 12 wt.%, is a more effective diffusion barrier during aging. In addition, P enrichment occurs near the interface of the EN/solder, and the degree of P enrichment is enhanced with aging time. The Au(Sn,Bi)4, with pyramidal and cubic shape, is observed in the Sn-58Bi/Au/Ni/Cu/Al2O3 joint.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. B.J. Freyman and R.C. Marrs, Electronic Manufacturing Technology Symp. (Piscataway, NJ: IEEE, 1993), pp. 41–45.
2. K.L. Lin and Y.C. Liu, Proc. Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 1999), pp. 607–612.
3. R.C. Marrs, Proc. 2nd Int. Conf. Exhibition on Multichip Modules (Bellingham, WA: ISHM and IEPS with SPIE, 1993), pp. 220–225.
4. J.W. Jang, D.R. Frear, T.Y. Lee, and K.N. Tu, J. Appl. Phys. 88, 6359 (2000).10.1063/1.1321787 ↗
5. D.R. Frear, F.M. Hosking, and P.T. Vianco, Proc. Materials Developments in Microelectronic Packaging Conf. (Materials Park, OH: ASM International, 1991), pp. 229–240.
6. C.Y. Lee and K.L. Lin, Jpn. J. Appl. Phys. 33, 4708 (1994).10.1143/JJAP.33.4708 ↗
7. T.A. Powers, T.J. Singler, and J.A. Clum, J. Electron. Mater. 23, 773 (1994).10.1007/BF02651372 ↗
8. R.B. Cinque and J.W. Morris, J. Electron. Mater. 23, 533 (1994).10.1007/BF02670656 ↗
9. H.D. Blair, T.Y. Pan, and J.M. Nicholson, Proc. Electronic Component and Technology Conf. (Piscataway, NJ: IEEE, 1998), pp. 259–267.
10. A.C.K. So and Y.C. Chan, Trans. Comp., Packag., Manuf. Technol. 19B, 661 (1996).
11. B.L. Young, J.G. Duh, and B.S. Chiou, J. Electron. Mater. 30, 543 (2001).10.1007/s11664-001-0096-x ↗
12. C.S. Huang, J.H. Yeh, B.L. Young, and J.G. Duh, J. Electron. Mater. 31, 1230 (2002).10.1007/s11664-002-0014-x ↗
13. B.L. Young and J.G. Duh, J. Electron. Mater. 30, 878 (2001).10.1007/s11664-001-0075-2 ↗
14. T. Massalski, Binary Alloy Phase Diagram (Materials Park, OH: ASM International, 1986), p. 540.
15. H.W. Miao, J.G. Duh, and B.S. Chiou, J. Mater. Sci. 11, 609 (2000).
16. R.E. Reed-Hill and R. Abbaschian, Physical Metallurgy Principles (Boston, MA: PWS Publishing Company, 1994), p. 364.
17. J.I. Goldstein, Scanning Electron Microscopy and X-ray Microanalysis (New York: Plenum Press, 1981), p. 405.10.1007/978-1-4613-3273-2 ↗
18. R.E. Reed-Hill and R. Abbaschian, Physical Metallurgy Principles (Boston, MA: PWS Publishing Company, 1994), p. 278.
19. T.A. Powers, T.J. Singler, and J.A. Clum, J. Electron. Mater. 23, 773 (1994).10.1007/BF02651372 ↗