journal article·2004-10

Crystallization and failure behavior of Ta-Ni nanostructured/amorphous diffusion barriers for copper metallization

J. S. Fang, T. P. Hsu, G. S. Chen

Journal of Electronic Materials· Volume 33· Issue 10
Publisher page

Abstract

This work examines the thin-film properties and diffusion barrier behavior of sputtered Ta-Ni films, aiming at depositing highly crystallization-resistant and conductive diffusion barriers for Cu metallization. Structural analysis indicates that the as-deposited Ta-Ni films indeed have a glassy structure and are free from highly resistive intermetallic compounds. Examining Si/Ta-Ni/Cu stacked samples reveals that thermally induced failure of amorphous Ta-Ni barriers is triggered by the barrier’s reaction with the silicon substrate at temperatures around 700°C. The effectiveness of the amorphous Ta-Ni thin film thus can be substantially enhanced by effectively blocking diffusion of copper toward the underlying silicon.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Copper Interconnects and Reliability · Semiconductor materials and interfaces · Metallic Glasses and Amorphous Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. J.D. McBrayer, R.M. Swanson, and T.W. Sigmon, J. Electrochem. Soc. 133, 1242 (1986).10.1149/1.2108827 ↗
2. C.Y. Chen, J.S. Jeng, and J.S. Chen, Thin Solid Films 420, 398 (2002).
3. S.R. Burgess, H. Donohue, K. Buchanan, N. Rimmer, and P. Rich, Microelectron. Eng. 64, 307 (2002).10.1016/S0167-9317(02)00803-1 ↗
4. Y.J. Lee, B.S. Suh, and C.O. Park, Thin Solid Films 357, 237 (1999).10.1016/S0040-6090(99)00651-3 ↗
5. H. Ono, T. Nakano, and T. Ohta, Appl. Phys. Lett. 64, 1511 (1994).10.1063/1.111875 ↗
6. M.-A. Nicolet, Appl. Surf. Sci. 91, 269 (1995).10.1016/0169-4332(95)00130-1 ↗
7. P.Y. Lee and J.L. Yang, Mater. Sci. Eng. A226–A228, 43 (1997).10.1016/S0921-5093(97)80024-X ↗
8. G. Briskin, J. Pelleg, and M. Talinaker, Thin Solid Films 288, 132 (1996).10.1016/S0040-6090(96)08819-0 ↗
9. A. Nash and P. Nash, Bull. Alloy Phase Diagram 5, 259 (1984).10.1007/BF02868549 ↗
10. M. Naoe, M. Kodaira, Y. Hoshi, and S. Yamanaka, IEEE Trans. Magn. MAG-17, 3062 (1981).10.1109/TMAG.1981.1061595 ↗
11. L. Rohr, P. Reimann, T. Richmond, and H.J. Guntherodt, Mater. Sci. Eng. A133, 715 (1991).10.1016/0921-5093(91)90169-N ↗
12. R. Hübner, M. Hecker, N. Mattern, V. Hoffmann, K. Wetzig, C. Wenger, H.-J. Engelmann, C. Wenzer, E. Zschech, and J.W. Bartha, Thin Solid Films 437, 248 (2003).10.1016/S0040-6090(03)00664-3 ↗
13. M. Stavrev, D. Fischer, C. Wenzel, K. Drescher, and N. Mattern, Thin Solid Films 307, 79 (1997).10.1016/S0040-6090(97)00319-2 ↗
14. J.S. Fang, H.L. Chang, G.S. Chen, and P.Y. Lee, Rev. Adv. Mater. Sci. 5, 510 (2003).