journal article·2004-01

Fiber-alignment shifts in butterfly laser packaging by laser-welding technique: Measurement and finite-element method analysis

Y. C. Hsu, W. K. Huang, M. T. Sheen, W. H. Cheng

Journal of Electronic Materials· Volume 33· Issue 1
Publisher page

Abstract

The post-weld-shift (PWS) induced fiber alignment shifts of fiber ferrule-clip (FFC) joints in butterfly laser packaging by laser welding technique have been studied experimentally and numerically. There are two designs of clip dimension in the FFC joint: the type I of no gap between clip and ferrule and the type II of 10 /spl mu/m gap. Using a novel 230x high magnification video probe camera with image acquisition system, the results showed that the fiber shifts of FFC joints with the type II exhibited shifts less than that with the type I. This suggests that the 10 /spl mu/m gap design may be more suitable for FFC joints than the no gap. The experimental measurements of fiber shifts were in reasonable agreement with the numerical calculations of the finite-element method (FEM) analysis. The major fiber shift formation mechanisms of FFC joints in laser welding process may come from the coefficient of thermal expansion mismatch, the solidification shrinkage, and the residual stresses within the FFC joint. This study has shown that the FEM is an effective method for predicting the PWS induced fiber alignment shifts in butterfly laser packaging.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. D.S. Alles, 40th Electronic Components and Technology Conf. (New York: IEEE, 1990), pp. 185–192.
2. M.R. Matthews, B.M. Macdonald, and K.R. Preston, IEEE Trans. Comp., Hybrids Manufacturing Technol. 3, 798 (1990).10.1109/33.62521 ↗
3. S. Jang, Proc. SPIE 2610, 138 (1995).10.1117/12.230077 ↗
4. K.S. Mobarhan, S. Jang, and R. Heyler, Application Note, No. 7 (Irvine, CA: Newport Corp., 2000), pp. 1–9.
5. J.H. Kuang, M.T. Sheen, S.C. Wang, G.L. Wang, and W.H. Cheng, IEEE Trans. Adv. Packaging 24, 81 (2001).10.1109/6040.909629 ↗
6. B. Valk, R. Battig, and O. Anthamatten, Opt. Eng. 34, 2675 (1995).10.1117/12.200621 ↗
7. P. Su, T.S. Ravi, D.D. Mahoney, and D. Tayler, OFC Techn. Dig. 4, 144 (1994).
8. W.H. Cheng, W.H. Wang, and J.C. Chen, IEEE Trans. Comp., Hybrids Manufacturing Technol. 20, 396 (1996).10.1109/96.641507 ↗
9. American Society of Metals, Metals Handbook, 8th ed. (Metals Park, OH: ASM, 1973), pp. 266–267.
10. MARC Analysis Research Corporation, MARC 6.3 User Guide (Palo Alto, CA: MARC Analysis Research Corporation, 1996).
11. MARC Analysis Research Corporation, MEMTAT II User Guide (Palo Alto, CA: MARC Analysis Research Corporation, 1996).
12. American Society of Metals, Metals Handbook, 8th ed. (Metals Park, OH: ASM, 1976), pp. 2–200.
13. T. Zacharia, S.A. David, J.M. Vitek, and T. Debroy, Metall. Trans. A 20A, 957 (1989).10.1007/BF02651661 ↗
14. T.Y. Pan, J. Electron. Packaging 113, 8 (1991).10.1115/1.2905373 ↗
15. B.Z. Hong and L.G. Burrell, IEEE Trans. Comp., Packaging, Manufacturing Technol. A, 113, 585 (1995).10.1109/95.465156 ↗
16. W.F. Chen and D.J. Han, Plasticity for Structure Engineers (New York: Springer-Verlag, 1988), pp. 61–67, 103–110.10.1007/978-1-4612-3864-5 ↗
17. W.B. Bickford, Mechanics of Solids—Concepts and Applications (Homewood, IL: Irvine, 1993), pp. 134–142.
18. K.J. Bathe, Finite Element Procedures (Englewood Cliffs, NJ: Prentice-Hall, 1996), pp. 129–136.