journal article·2006-01

Thermal performance of sputtered insoluble Cu(W) films for advanced barrierless metallization

J. P. Chu, C. H. Lin, Y. Y. Hsieh

Journal of Electronic Materials· Volume 35· Issue 1
Publisher page

Abstract

The thermal performance of sputtered Cu films with dilute insoluble W (1.3 at.%) on barrierless Si substrates has been studied, using the analyses of focused ion beam, x-ray diffraction, and electrical resistivity measurement. The role of the Cu(W) film as a seed layer has been confirmed based on the thermal performance evaluations in both thermal cycling and isothermal annealing at various temperatures. The electrical resistivity of ∼1.8 µΩ-cm for Cu/Cu(W) film is obtained after thermal annealing at 400°C. Because of the good thermal stability, the Cu(W) seed layer is also considered to act as a diffusion buffer and is stable up to 490°C for the barrierless Si scheme. The results indicate that the Cu/Cu(W) scheme has potential in advanced barrierless metallization applications.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Semiconductor materials and interfaces · Copper Interconnects and Reliability · Silicon and Solar Cell Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. B. Li, T.D. Sullivan, T.C. Lee, and D. Badami, Microelectron. Reliab. 44, 365 (2004).10.1016/j.microrel.2003.11.004 ↗
2. G.S. Chae, H.S. Soh, W.H. Lee, and J.G. Lee, J. Appl. Phys. 90, 411 (2001).10.1063/1.1375021 ↗
3. J. You, J. Kang, D. Kim, J.J. Pak, and C.S. Kang, Solar Energy Mater. Sol. Cells 79, 339 (2003).10.1016/S0927-0248(02)00470-1 ↗
4. J.P. Chu, C.H. Chung, P.Y. Lee, J.M. Rigsbee, and J.Y. Wang, Metall. Mater. Trans. A 29A, 647 (1998).10.1007/s11661-998-0145-7 ↗
5. J.P. Chu and T.N. Lin, J. Appl. Phys. 85, 6462 (1999).10.1063/1.370287 ↗
6. J.P. Chu, C.J. Liu, C.H. Lin, and S.F. Wang, Mater. Chem. Phys. 72, 286 (2001).10.1016/S0254-0584(01)00454-0 ↗
7. C.H. Lin, J.P. Chu, T. Mahalingam, T.N. Lin, and S.F. Wang, J. Mater. Res. 18, 1429 (2003).10.1557/JMR.2003.0196 ↗
8. C.H. Lin, J.P. Chu, T. Mahalingam, T.N. Lin, and S.F. Wang, J. Electron. Mater. 32, 1235 (2003).10.1007/s11664-003-0017-2 ↗
9. J.P. Chu, Y.Y. Hsieh, C.H. Lin, and T. Mahalingam, J. Mater. Res. 20, 1379 (2005).
10. P. Xu and S.S. Rathi, Semiconductor Fabtech. 11, 239 (2000).
11. N. Benouattas, A. Mossar, D. Raiser, J. Faerber, and A. Bouabellou, Appl. Surf. Sci. 153, 79 (2000).10.1016/S0169-4332(99)00366-9 ↗
12. S. Strehle, S. Menzel, H. Wendrock, J. Acker, T. Gemming, and K. Wetzig, J. Microelectron. Eng. 76, 205 (2004).10.1016/j.mee.2004.07.055 ↗
13. M. Uekubo, T. Oku, K. Nii, M. Murakami, K. Takahiro, S. Yamaguchi, T. Nakano, and T. Ohta, Thin Solid Films 286, 170 (1996).10.1016/S0040-6090(96)08553-7 ↗
14. W.F. Wu, K.L. Ou, C.P. CHou, and C.C. Wu, J. Electrochem. Soc. 150, G83 (2003).10.1149/1.1531974 ↗