Creep resistance of tin-based lead-free solder alloys
Source abstract
Abstract
This paper reports on the microstructure-creep property relationship of three precipitation-strengthened tin (Sn)-based lead (Pb)-free solder alloys (Sn-0.7Cu, Sn-3.5Ag, and Sn-3.8Ag-0.7Cu) in bulk samples, together with Sn-37Pb as the alloy for comparison at temperatures of 303 K, 348 K, and 393 K. The creep resistance of these three Sn-based Pb-free solders increases, i.e., the steady-state creep rates decrease, with increasing volume fraction of precipitate phases for the Pb-free solder alloys. Their apparent stress exponents (na ∼ 7.3-17), which are all higher than that of pure Sn, attain higher values with increasing volume fraction of precipitate phases at constant temperature, and with decreasing temperature for the same solder alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. J.W. Morris, Jr. and H.L. Reynolds, Design and Reliability of Solders and Solder Interconnections, ed. R.K. Madihara, S.M.L. Sastry, P.K. Liaw, K.L. Murty, D.R. Frear, and W.L. Winterbottom (Warrendale, PA: TMS, 1997), pp. 49–58.
2. H. Mavoori and S. Jin, JOM 52, 29 (2000).10.1007/s11837-000-0144-7 ↗
3. D.R. Frear, J.W. Jang, J.K. Lin, and C. Zhang, JOM 53, 28 (2001).10.1007/s11837-001-0099-3 ↗
4. H. Mavoori, J. Chin, S. Vaynman, B. Moran, L. Keer, and M.E. Fine, J. Electron. Mater. 26, 783 (1997).10.1007/s11664-997-0252-z ↗
5. V.I. Igoshev and J.I. Kleiman, J. Electron. Mater. 29, 244 (2000).10.1007/s11664-000-0150-0 ↗
6. R.J. McCabe and M.E. Fine, JOM 52, 33 (2000).10.1007/s11837-000-0146-5 ↗
7. W.J. Plumbridge, C.R. Gagg, and S. Peters, J. Electron. Mater. 30, 1178 (2001).10.1007/s11664-001-0147-3 ↗
8. H.G. Song, J.W. Morris, Jr., and F. Hua, JOM 54, 30 (2002).10.1007/BF02701846 ↗
9. C.M.L. Wu and M.L. Huang, J. Electron. Mater. 31, 442 (2002).10.1007/s11664-002-0098-3 ↗
10. M.L. Huang, L. Wang, and C.M.L. Wu, J. Mater. Res. 17, 2897 (2002).10.1557/JMR.2002.0420 ↗
11. W. Yang, L.E. Felton, and R.W. Messler, J. Electron. Mater. 24, 1465 (1995).10.1007/BF02655465 ↗
12. P. Nash and A. Nash, ASM Handbook Committee, ASM Handbook, Vol. 3, Alloy Phase Dia-gram (Materials Park, OH: ASM International, 1992), p. 2.37 and 2.178.
13. J. Čadek, Creep in Metallic Materials (New York: Elsevier, 1988), p. 44.
14. P. Adeva, G. Caruanan, O.A. Ruano, and M. Torralba, Mater. Sci. Eng. A194, 17 (1995).10.1016/0921-5093(94)09654-6 ↗
15. F.A. Mohamed, K.L. Murty, and J.W. Morris, Metall. Trans. 4, 935 (1973).10.1007/BF02645593 ↗
16. J.E. Breen and J. Weertman, JOM 72, 1230 (1955).10.1007/BF03379034 ↗
17. V. Raman and R. Berriche, J. Mater. Res. 7, 627 (1992).10.1557/JMR.1992.0627 ↗
18. R. Darveaux, IEEE Trans. Compon., Hybrids Manuf. Technol. 15, 1013 (1992).10.1109/33.206925 ↗
19. M.D. Mathew, S. Mova, H. Yang, and K.L. Murty, Creep Behavior of Advanced Materials for the 21st Century (Warrendale, PA: TMS, 1999), pp. 51–59.
20. E. Artz and J. Rösler, Acta Metall. 36, 1053 (1988).10.1016/0001-6160(88)90159-9 ↗