journal article·2004-11

Isotropic conductive adhesives with fusible filler particles

Jong-Min Kim, Kiyokazu Yasuda, Kozo Fujimoto

Journal of Electronic Materials· Volume 33· Issue 11
Publisher page

Abstract

A new low-temperature assembly process using a new class of isotropic conductive adhesives (ICAs) with fusible filler particles was proposed to realize a low-temperature, fluxless and cost-effective, alternative, solder flip-chip interconnection technology. New ICA formulations were developed using two different resin materials and fusible filler particles. The curing behavior of the resin materials and the melting of the fusible filler were observed by differential scanning calorimetry (DSC). The coalescence and wetting states, the size distribution of the fusible fillers, and the formation of the conduction path in each ICA formulation were observed with a laser microscope. It was found that two different types of electrical conductive paths, necking type and bump type, were produced. The bump-type conductive path was more effective than that of the necking type in achieving a lower electrical resistance through resistance measurement. The reduction capability of the base resin material was effective for the coalescence and the wetting of the fusible fillers and affected the conductive path type. A good metallurgical connection was formed between the fusible fillers in ICAs and between the fusible fillers and the copper surface even at the lower filler-volume fraction of 30%.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Synthesis and properties of polymers

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (12)

Show source-provided references
1. I. Anjoh, A. Nishimura, and S. Eguchi, IEEE Trans. Electron Dev. 45, 743 (1998).10.1109/16.661237 ↗
2. R. Nair, IBM J. Res. Dev. 46, 223 (2002).10.1147/rd.462.0223 ↗
3. A. Rahn, The Basics of Soldering (New York: John Wiley & Sons, 1993), p. 1.
4. C.B. Park, S.M. Hong, J.P. Jung, C.S. Kang, and Y.E. Shin, Mater. Trans. 42, 820 (2001).10.2320/matertrans.42.820 ↗
5. J.C. Jagt, P.J.M. Beris, and G.F.C.M. Lijten, IEEE Trans. CPMT: Part B 18, 292 (1995).
6. D. Lu and C.P. Wong, Proc. Int. Symp. on Advanced Packaging Materials (Piscataway, NJ: IEEE, 1999), pp. 288–294.
7. D. Wojciechowski, J. Vanfleteren, E. Reese, and H.-W. Hagedorn, Microelectron. Reliab. 40, 1215 (2000).10.1016/S0026-2714(00)00049-4 ↗
8. D. Lu and C.P. Wong, Int. J. Adhesion Adhesives 20, 189 (2000).10.1016/S0143-7496(99)00039-1 ↗
9. Y.C. Chan and D.Y. Luk, Microelectron. Reliab. 42, 1195 (2002).10.1016/S0026-2714(02)00089-6 ↗
10. S.K. Kang, R.S. Rai, and S. Purushothaman, IEEE Trans. CPMT: Part A 21, 18 (1998).
11. R. Dudek, H. Berek, T. Fritsch, and B. Michel, IEEE Trans. Comp. Packaging Technol. 23, 462 (2000).10.1109/6144.868845 ↗
12. D. Lu and C.P. Wong, IEEE Trans. Electron. Packaging Manuf. 23, 185 (2000).10.1109/6104.873246 ↗