journal article·2002-08

The influence of thermal aging on joint strength and fracture surface of Pb/Sn and Au/Sn solders in laser diode packages

M. T. Sheen, C. M. Chang, H. C. Teng, J. H. Kuang, K. C. Hsieh, W. H. Cheng

Journal of Electronic Materials· Volume 31· Issue 8
Publisher page

Abstract

The joint strength and fracture surface of Pb/Sn and Au/Sn solders in laser-diode packages after thermal-aging testing were studied experimentally. Specimens were aged at 150°C for up to 49 days. The joint strength decreased as aging time increased. The microstructure and fracture surface of the Pb/Sn and Au/Sn solder joints showed that the joint strength decrease was caused by both the enlargement of the initial voids and an increase in the number of voids as aging time increased. The formation of Kirkendall voids with intermetallic-compound (IMC) growth of the Pn/Sn solder as aging time increased was also a possible mechanism for the joint-strength reduction. Finite-element method (FEM) simulations were performed on the joint-strength estimation of Pb/Sn and Au/Sn solders in thermal-aging tests. The coupled thermal-elasticity-plasticity model was used to simulate distributions of the thermal and residual stresses, creep deformation, and joint-strength variations in the solder joints under various thermal-aging tests. Simulation results were in good agreement with the experimental measurements that the solder-joint strength decreased as aging time increased. The result suggests that the FEM is an effective method for analyzing and predicting the solder-joint strength in laser-diode packages.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (25)

Show source-provided references
1. D.S. Alles, Proc. 40th ECTC (IEEE CPMT Society, 1990), pp. 185–192.
2. R.E. Pratt, E.I. Stromswold, and D.J. Quesnel, IEEE Trans. Comp. Hybrids Manuf. Technol., Part A 19, 134 (1996).10.1109/95.486625 ↗
3. C. Basaran and R. Chandaroy, IEEE Trans. Comp. Hybrids Manuf. Technol., Part A 20, 530 (1997).10.1109/95.650944 ↗
4. N.M. Poon, C.M.L. Wu, J.L. Lai, and Y.C. Chan, IEEE Trans. Adv. Packaging 23, 708 (2000).10.1109/6040.883762 ↗
5. Z.M. Gauan, G.X. Liu, and T. Liu, IEEE Trans. Adv. Packaging 23, 737 (2000).10.1109/6040.883766 ↗
6. A.R. Mickelson, N.R. Basavanhally, and Y.C. Lee, Optoelectronic Packaging (New York: John Wiley & Sons, 1997), ch. 5, pp. 59–78.
7. S.C. Wang, C.M. Wang, C. Wang, H.L. Chang, Y.K. Tu, C.J. Hwang, C. Chi, W.H. Wang, Y.D. Yang, and W.H. Cheng, J. Cheng Electron. Mater. 25, 1797 (1996).10.1007/s11664-996-0038-8 ↗
8. Bellcore Reliability Assurance Practices for Optoelectronic Devices in Loop Applications, TA-TSY-000983, Issue 1, Jan. 1990, (Bellcore, NJ).
9. E. Suhir, J. Lightwave Technol. 12, 1766 (1994).10.1109/50.337488 ↗
10. W.D. Callister, Materials Science and Engineering: An Introduction, 3rd ed. (New York: John Wiley & Sons, 1994), ch. 8, pp. 181–235.
11. MARC Analysis Research Corporation, MARC 6.3, User Guide (Palo Alto, CA: MARC Analysis Research Corporation, 1996).
12. MARC Analysis Research Corporation, MENTAL II, User Guide (Palo Alto, CA: MARC Analysis Research Corporation, 1996)
13. W.H. Cheng, Y.D. Yang, S.C. Wang, S. Chi, M.T. Sheen, and J.H. Kuang, IEEE Trans. Comp., Hybrids Manuf. Technol. 20, 396 (1997).
14. J.H. Lau and Y.H. Pao, Solder Joint Reliability of BGA, CSP, Flip Chips, and Fine Pitch SMT Assemblies (New York: McGraw-Hill, 1997), ch. 4.
15. Metals Handbook, 8th ed., (Cleveland, OH: ASM, 1963), pp. 266–267.
16. T.Y. Pan, J. Electron. Packaging 113, 8 (1991).10.1115/1.2905373 ↗
17. B.Z. Hong and L.G. Burrell, IEEE Trans. Comp., Hybrids Manuf. Technol. Part A 18, 585 (1995).10.1109/95.465156 ↗
18. W.H. Cheng, M.T. Sheen, G.L. Wang, S.C. Wang, and K.J. Kuang, J. Lightwave Technol. 19, 1177 (2001).10.1109/50.939799 ↗
19. W.F. Chen and D.J. Han, Plasticity for Structure Engineers (Taiwan: Gau Lih), chs. 3, pp. 117–176, and 5, pp. 235–286.
20. J. Cadek, Creep in Metallic Materials (New York: Elsevier, 1988), chs. 1, pp. 13–28, and 15, pp. 271–343.
21. W.B. Bickford, Mechanics of Solids-Concepts And Applications (Homewood, IL, 1993), ch. 4, pp. 192–234.
22. K.J. Bathe, Finite Element Procedures (Englewood Cliffs, NJ: Prentice-Hall International, 1996), ch. 6, pp. 485–640.
23. F.P. Incropera and D.P. DeWitt, Fundamentals of Heat and Mass Transfer (New York: John Wiley & Sons, 1996), ch. 2, pp. 33–53.
24. M.T. Sheen (Ph.D. thesis, National Sun Yat-sen University, Taiwan, 2000).
25. M. Rassaian and M.W. Beranek, IEEE Trans. Adv. Packaging 22, 86 (1999).10.1109/6040.746547 ↗