Novel interconnection method using electrically conductive paste with fusible filler
Source abstract
Abstract
A new class of electrically conductive adhesives (ECAs) was developed using fusible filler particles. Differential scanning calorimetry (DSC) was used to examine the curing behavior of the base resin material and the melting behavior of the filler particles. The formation of the interconnection before and after the curing process was observed by means of a microfocus x-ray system. The cross-sectional morphology of the electrical conduction path was investigated by optical microscopy. It is believed that the wetting and coalescence behavior of the molten filler particles are the main driving forces leading to the production of the interconnection between the electrodes. In addition, the metallurgical connections both between the particles and between the particles and the copper substrate were observed using scanning electron microscopy and electron probe microanalysis (EPMA).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Nanofabrication and Lithography Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. A. Rahn, The Basics of Soldering (New York: John Wiley & Sons, 1993), pp. 1–102.
2. M. Abtew and G. Selvaduray: Mater. Sci. Eng. R: Rep. 27, 95 (2000).10.1016/S0927-796X(00)00010-3 ↗
3. K. Suganuma: Curr. Opin. Solid State Mater. Sci. 5, 55 (2001).10.1016/S1359-0286(00)00036-X ↗
4. J. Liu, Z. Lai, H. Kristiansen, and C. Khoo, Proc. 3rd Int. Conf. on Adhesive Joining and Coating Technology in Electronics Manufacturing (Piscataway, NJ: IEEE, 1998), pp. 1–18.
5. J. Liu, Conductive Adhesives for Electronics Packaging (Port Erin, Isle of Man, U.K.: Electrochemical Publications Ltd., 1999), pp. 1–432.
6. J.C. Jagt, P.J.M. Beris, and G.F.C.M. Lijten, IEEE Trans. Comp. Packaging Manufacturing Technol.-Part B 18, 292 (1995).10.1109/96.386264 ↗
7. D. Lu and C.P. Wong, Proc. Int. Symp. on Advanced Packaging Materials (Piscataway, NJ: IEEE, 1999), pp. 288–294.
8. D. Wojciechowski, J. Vanfleteren, E. Reese, and H.-W. Hagedorn, Microelectron. Reliability 40, 1215 (2000).10.1016/S0026-2714(00)00049-4 ↗
9. M. Zwolinski, J. Hickman, H. Rubin, Y. Zaks, S. McCarthy, T. Hanlon, P. Arrowsmith, A. Chaudhuri, R. Hermansen, S. Lau, and D. Napp: IEEE Trans. Comp. Packaging and Manufacturing Technol.-Part C 19, 241 (1996).10.1109/3476.558550 ↗
10. D. Lu, Q.K. Tong, and C.P. Wong, IEEE Trans. Electron. Packaging Manufacturing 22, 228 (1999).10.1109/6104.795858 ↗
11. K. Yasuda, J.M. Kim, M. Yasuda, and K. Fujimoto, 2003 Int. Conf. on Solid State Devices and Materials (Tokyo, Japan: Jpn. Soc. of Appl. Phys., 2003), pp. 390–391.
12. J.M. Kim, K. Yasuda, M. Rito, and K. Fujimoto, Mater. Trans. 45, 157 (2004).10.2320/matertrans.45.157 ↗
13. J.M. Kim, K. Yasuda, M. Yasuda, and K. Fujimoto, Mater. Trans. 45, 793 (2004).10.2320/matertrans.45.793 ↗
14. J.M. Kim, K. Yasuda, and K. Fujimoto, J. Electron. Mater. 33, 1331 (2004).10.1007/s11664-004-0162-2 ↗
15. A.D. Romig, Jr., F.G. Yost, and P.F. Hlava, in Microbeam Analysis, eds. A.D. Romig, Jr. and J.I. Goldstein (San Francisco, CA: San Francisco Press Inc., 1984), pp. 87–92.
16. J.L. Freer and J.W. Morris, Jr., J. Electron. Mater. 21, 647 (1992).10.1007/BF02655434 ↗
17. C. Gallagher, G.G. Matijasevic, and J.F. Maguire, 1997 Electronic Components Technology Conf. (Piscataway, NJ: IEEE, 1997), pp. 554–560.
18. K.-S. Moon, J. Wu, and C.P. Wong, IEEE Tran. Comp. Packaging Technol. 26, 375 (2003).10.1109/TCAPT.2003.815101 ↗