Effects of load and thermal conditions on Pb-free solder joint reliability
Source abstract
Abstract
Reliability of lead-free solder joints has been a hot topic widely debated in the electronic industry. Most published data indicate that a change to lead-free soldering has the potential benefit of more reliable solder joints than the current Sn-Pb eutectic solder joints. However, in reality many mechanical, metallurgical, thermal, and environmental factors affect the service reliability of solder joints. This paper tries to shed some light on the effects of mechanical loading and thermal conditions on solder joint reliability. These conditions are determined not only by external environments but also by the solder alloy itself and the joint geometry. Analyses with first principles are carried out on solder joints of both areal array and peripheral packages. Effects on fatigue life of solder joint geometry, thermal and mechanical characteristics of components and substrate materials, and application conditions are discussed. The analysis helps explain why lead-free solder joints may not be more reliable in certain application conditions than the current Sn-Pb eutectic solder joints.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. National Center for Manufacturing Sciences, Lead-Free Solder Project, Final Report, NCMS Report 0401RE96 (Ann Arbor, MI: National Center for Manufacturing Sciences, 1997).
2. J. Hwang, Surf. Mount Technol. 15, 70 (2001).
3. J. Liang, N. Gollhardt, P.S. Lee, and S. Heinrich, Proc. Advances in Electronic Packaging (New York: ASME, 1997), pp. 1583–1592.
4. D.S. Stone and M.M. Rashid, in The Mechanics of Solder Alloy Interconnects, eds. D.R. Frear, S.N. Burchett, H.S. Morgan, and J.H. Lau (New York: Van Nostrand Reinhold, 1994), pp. 87–157.
5. D. Shangguan, Study of Compatibility for Lead-free Solder PCB Assembly. Proc. IPC and Soldertec First International Conference on Lead-Free Electronics, June 2003, Brussels, Belgium, pp. 298–306.
6. J. Clech, Proc. IPC/SMEMA APEX 2004 Conf., Anaheim, CA, 21–26 February 2004.
7. J. Lau, N. Hoo, R. Horsley, J. Smetana, D. Shangguan, W. Dauksher, D. Love, I. Menis, and Sullivan, Reliability Testing and Data Analysis of High-Density Packages’ Lead-Free Solder Joints. Proceedings of APEX 2003, March 2003, Anaheim, CA, pp. S42-3-1/24.
8. J. Liang, N. Dariavach, and S. Downs, IPC/Soldertec Global 2nd Int. Conf. on Lead Free Electronics, Towards Implementation of the RoHS Directive, Amsterdam, 21–23 June, 2004.
9. W. Ren, M. Lu, S. Liu, and D. Shangguan, Soldering Surf. Mount Technol. 9, 37 (1997).
10. T.A. Woodrow, Proc. Int. Conf. on Lead-Free Components and Assemblies (Northbrook, IL: IPC, 2002), pp. 117–129.
11. S. Heinrich, J. Liang, and P.S. Lee, Proc. Adv. Electron. Packaging (New York: ASME, 1999) pp. 43–53.
12. S.M. Heinrich, P.S. Lee, and J. Liang, Proc. 2002 ASME Int. Mechanical Engineering Congress Expo. (New York: ASME, 2002), pp. 485–498.
13. W. Engelmaier, in Solder Joint Reliability—Theory and Applications, ed. J.H. Lau (New York: Van Nostrand Reinhold, 1991), pp. 545–587.10.1007/978-1-4615-3910-0_17 ↗
14. M. Kitano and M. Honda, Proc. Advances in Electronic Packaging (New York: ASME, 1997), pp. 1407–1412.
15. R. Satoh, K. Arakawa, M. Harada, and K. Matsui, IEEE Trans. CHMT 14, 224 (1991).
16. H.D. Solomon, in Low Cycle Fatigue, ASTM STP 942, eds. H.D. Solomon, G.R. Halford, L.R. Kaisand, and B.N. Leis (Philadelphia, PA: ASTM, 1988), pp. 342–370.10.1520/STP24491S ↗
17. J. Liang, Int. J. Fatigue Fract. Eng. Mater. Struct. 19, 1401 (1996).10.1111/j.1460-2695.1996.tb00175.x ↗
18. J. Liang, N. Gollhardt, P.S. Lee, S.A. Schroeder, and W.L. Morris, Proc. Applications of Experimental Mechanics to Electronic Packaging (New York: ASME, 1995), pp. 1–9.
19. M. Mukai, T. Kawakami, Y. Hiruta, K. Takahashi, K. Kishimoto, and T. Shibuya, J. Electron. Packaging 120, 207 (1998).10.1115/1.2792623 ↗
20. Q. Zhang, P. Friesen, and A. Dasgupta, CALCE Project C0305, 2003 (private communication).
21. J. Liang and R.M. Pelloux, Chin J. Met. Sci. Technol. 5, 1 (1989).
22. J.D. Morrow, Cyclic Plastic Strain Energy and Fatigue of Metals, ASTM STP 378 (West Conshohocken, PA: ASTM International, 1964), pp. 45–87.
23. D. Xie, M. Arra, H. Phan, D. Shangguan, D. Geiger, and S. Yi, Proc. Telecomm Hardware Solutions Conf. Exhibit. (Edina, MN: SMTA; Washington, DC: IMAPS, 2002), pp. 83–88.