journal article·2004-04

Development of a novel adaptive lead-free solder containing reinforcements displaying the shape-memory effect

I. Dutta, B. S. Majumdar, D. Pan, W. S. Horton, W. Wright, Z. X. Wang

Journal of Electronic Materials· Volume 33· Issue 4
Publisher page

Abstract

Microelectronic solder joints are typically exposed to aggressive thermomechanical cycling (TMC) conditions during service. During TMC, strain localization occurs near solder/bond pad interfaces, where large, inelastic-shear strains accumulate, eventually causing low-cycle fatigue (LCF) failure of the joint. In this study, a novel methodology to mitigate the effects of strain localization within the joint is discussed, wherein the solder alloy is reinforced with a martensitic NiTi-based, shape-memory alloy (SMA). In this scheme, the SMA reinforcement deforms in shear concurrently with the solder during TMC and, subsequently, undergoes martensite-to-austenite (M → A) transformation, placing the solder matrix next to the reinforcements in reverse shear. This is purported to reduce inelastic-strain localization within the solder and, thus, enhance joint life. In this paper, we present results of thermal-mechanical loading experiments conducted on a monolithic 95.5Sn-3.8Ag-0.7Cu solder, a Cu/Cu6Sn5 particle-reinforced solder, and NiTi-solder, single-fiber composites (SFCs) to elucidate the impact of the shape-memory effect on the overall joint behavior. It is demonstrated that during TMC, the phase transformations occurring in NiTi can significantly reduce the inelastic-strain range to which a joint is subjected (by ∼25% in the present experiments). Finally, we report on the successful fabrication of a composite solder paste from which adaptive solders with a uniform distribution of about 5 vol.% of NiTi particulates may be produced.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · Intermetallics and Advanced Alloy Properties · Advanced Welding Techniques Analysis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. H. Conrad, Z. Guo, Y. Fahmy, and D. Yang, J. Electron. Mater. 28, 1062 (1999).10.1007/s11664-999-0184-x ↗
2. P. Hacke, A.F. Sprecher, and H. Conrad, J. Electron. Packaging 115, 153 (1993).10.1115/1.2909311 ↗
3. P.L. Hacke, Y. Fahmy, and H. Conrad, J. Electron. Mater. 27, 941 (1998).10.1007/s11664-998-0125-0 ↗
4. I. Dutta, A. Gopinath, and C. Marshall, J. Electron. Mater. 31, 253 (2002).10.1007/s11664-002-0141-4 ↗
5. V. Sarihan, Trans. ASME 115, 16 (1993).
6. C.G. Kuo, S.M.L. Sastry, and K.L. Jerina, Metall. Mater. Trans. A 26A, 3265 (1995).10.1007/BF02669454 ↗
7. J.L. Marshall and J. Calderon, Solder. Surf. Mount Technol. 9, 22 (1997).10.1108/09540919710800647 ↗
8. A.W. Gibson, K.N. Subramanian, and T.R. Bieler, J. Adv. Mater. 30, 19 (1998).
9. K.N. Subramanian, T.R. Bieler, and J.P. Lucas, J. Electron. Mater. 28, 1176 (1999).10.1007/s11664-999-0154-3 ↗
10. J. Sigelko, S. Choi, K.N. Subramanian, J.P. Lucas, and T.R. Bieler, J. Electron. Mater. 28, 1184 (1999).10.1007/s11664-999-0155-2 ↗
11. J.P. Lucas, F. Guo, J. McDougall, T.R. Bieler, K.N. Subramanian, and J.K. Park, J. Electron. Mater. 28, 1270 (1999).10.1007/s11664-999-0167-y ↗
12. J.H. Lee, D. Park, J.T. Moon, Y.H. Lee, D.H. Shin, and Y.S. Kim, J. Electron. Mater. 29, 1264 (2000).10.1007/s11664-000-0022-7 ↗
13. S. Choi, J.P. Lucas, K.N. Subramanian, and T.R. Bieler, J. Mater. Sci. 11, 497 (2000).
14. J. McDougall, S. Choi, T.R. Bieler, K.N. Subramanian, and J.P. Lucas, Mater. Sci. Eng. A 285, 25 (2000).10.1016/S0921-5093(00)00661-4 ↗
15. C. Val, M. Leroy, and H. Boulharts, Proc. Int. Conf. Electron. Techno. (Windsor, UK: 1994), pp. 119–122.
16. S. Trombert, J. Chazelas, P. Bonniay, W. Van Moorleghem, M. Chandrasekharan, and J.F. Silvain, Proc. SPIE, Int. Soc. Opt. Engr., vol. 2779 (Lyon, France: 1996), pp. 475–480.
17. S. Trombert, J. Chazelas, M. Lahaye, and J.F. Silvain, Compos. Interfaces 5, 479 (1998).10.1163/156855498X00289 ↗
18. J.F. Silvain, J. Chazelas, M. Lahaye, and S. Trombert, Mater. Sci. Eng. A 273–275, 818 (1999).10.1016/S0921-5093(99)00423-2 ↗
19. J.F. Silvain, J. Chazelas, and S. Trombert, Proc. Shape-Memory Superelastic Technology, J.G. Webster, ed. (New York: John Wiley & Sons, Inc., 2002), vol. 7, pp. 128.
20. O. Fouassier, S. Trombert, J.F. Silvain, J. Chazelas, D. Aslandis, A. Serneels, and W. Van Moorleghem, Proc. Shape-Memory Superelastic Technology (1999), pp. 1–9.
21. ASM International, Metals Handbook, 10th ed. (Materials Park, OH: ASM International, 1990), vol. 2, pp. 897–902.
22. T.W. Duerig, Engineering Aspects of Shape-Memory Alloys (London: Butterworth-Heinemann, 1990).
23. Wiley Encyclopedia of Electrical and Electronics Engineering, J.G. Webster, ed., (New York: John Wiley & Sons, Inc., 2002), vol. 7, pp. 128.
24. T. Fang, private communication (2002).
25. J. Khalil-Allafi, A. Dlouhy, and G. Eggeler, Acta Mater. 50, 4255 (2002).10.1016/S1359-6454(02)00257-4 ↗
26. G. Eggeler, J. Khalil-Allafi, K. Neuking, and A. Dlouhy, Z. Metallkd. 93, 654 (2002).10.3139/146.020654 ↗