journal article·2005-10

Carbon-black thixotropic thermal pastes for improving thermal contacts

Chia-Ken Leong, Yasuhiro Aoyagi, D. D. L. Chung

Journal of Electronic Materials· Volume 34· Issue 10
Publisher page

Abstract

This paper addresses thermal interface materials for thermal conduction of excess heat for microelectronic applications. Carbon black (30 nm) thixotropic paste based on polyol ethers is comparable to carbon black fluidic paste based on polyethylene glycol (PEG) in its effectiveness as a thermal paste, and in its dependence on pressure history. Prior pressure (up to 0.69 MPa) application is helpful. The optimum carbon black content is 2.4 vol.% for the thixotropic paste. The thermal contact conductance across copper surfaces is 30 × 104 and 11 × 104 W/m2-°C for surface roughness of 0.05 µm and 15 µm, respectively. The volume electrical resistivity is 3 × 103 Ω-cm. Boron nitride (BN) (5–11 µm) and graphite (5 µm) thixotropic pastes are less effective than carbon black thixotropic paste by up to 70% and 25%, respectively, in thermal contact conductance, due to low conformability.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Thermal properties of materials · Adhesion, Friction, and Surface Interactions · Electronic Packaging and Soldering Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (14)

Show source-provided references
1. E.G. Wolff and D.A. Schneider, Int. J. Heat Mass Transfer 41, 3469 (1998).10.1016/S0017-9310(98)00067-2 ↗
2. T. Ouellette and M. De Sorgo, Proc. Power Electronic Design Conf. (Cerritos, CA: Power Sources Users Conf., 1985), pp. 134–138.
3. M.R. Vogel, Proc. Int. Intersociety of Electronic Packaging Conf. (New York: ASME, 1995), p. 989.
4. S.W. Wilson, A.W. Norris, E.B. Scott, and M.R. Costello, National Electronic Packaging and Production Conf.: Proc. Technical Program (Norwalk, CT: Reed Exhibition Companies, 1996), pp. 788–796.
5. A.L. Peterson, Proc. 40th Electronic Components and Technology Conf. (Piscataway, NJ: IEEE, 1990), pp. 613–619.10.1109/ECTC.1990.122251 ↗
6. X. Lu, G. Xu, P.G. Hofstra, and R.C. Bajcar, J. Polym. Sci. Pol. Phys. 36, 2259 (1998).10.1002/(SICI)1099-0488(19980930)36:13<2259::AID-POLB2>3.0.CO;2-O ↗
7. T. Sasaski, K. Hisano, T. Sakamoto, S. Monma, Y. Fijmori, H. Iwasaki, and M. Ishizuka, Jpn. IEMT Symp. Proc.: IEEE/CPMT Int. Electronic Manufacturing Technology (IEMT) Symp. (Piscataway, NJ: IEEE, 1995), p. 236.
8. Y. Xu, X. Luo, and D.D.L. Chung, J. Electron. Packaging 124, 188 (2002).10.1115/1.1477191 ↗
9. Y. Xu, X. Luo, and D.D.L. Chung, J. Electron. Packaging 122, 128 (2000).10.1115/1.483144 ↗
10. C.-K. Leong and D.D.L. Chung, Carbon 42, 2323 (2004).10.1016/j.carbon.2004.05.013 ↗
11. C.-K. Leong and D.D.L. Chung, Carbon 41 2459 (2003).10.1016/S0008-6223(03)00247-1 ↗
12. Q. Ngo, B.A. Cruden, A.M. Cassell, G. Sims, M. Meyyappan, J. Li, and C.Y. Yang, Nano Lett. 4, 2403 (2004).10.1021/nl048506t ↗
13. W.J. Parker, R.J. Jenkins, C.P. Butler, and G.L. Abbott, J. Appl. Phys. 32, 1679 (1961).10.1063/1.1728417 ↗
14. K. Inoue and E. Ohmura, Yosetsu Gakkai Ronbunshu/Q. J. Jpn. Welding Soc. 6, 130 (1988).