A model for wafer scale variation of removal rate in chemical mechanical polishing based on elastic pad deformation
Source abstract
Abstract
It is well known that within wafer non-uniformity (WIWNU), due to the variation in material, removal rate (MRR) in the whole wafer plays an important role in determining the quality of a wafer planarized by CMP. Various material removal models also suggest that the MRR is strongly influenced by the interface pressure. In the present work, an analytical expression for pressure distribution at the wafer and pad interface is developed. It is observed that depending on the wafer curvature and polishing conditions, the interface pressure may exhibit significant variation. The analytical model predictions are first verified against finite element method (FEM) simulations. The predicted analytical pressure profiles are then utilized in Preston's equation to estimate the MRR, and these MRR predictions are also compared to experimental observations. The analytical results suggest, that for a specified wafer curvature there exists a certain polishing condition (and vice versa) that will enable holding the WIWNU within a specified tolerance band. The proposed model facilitates the design space exploration for such optimal polishing conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Surface Polishing Techniques · Advanced machining processes and optimization · Advanced Measurement and Metrology Techniques
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. J.M. Steigerwald, S.P. Murarka, and R.J. Gutmann, Chem. Mechan. Planarization of Microelectronic Mater (New York: John Wiley & Sons Pub., 1997).10.1002/9783527617746 ↗
2. C.W. Kaanta, S.G. Bombardier, W.J. Cote, W.R. Hill, G. Kerzkowski, H.S. Landis, D.J. Poindexter, G.W. Pollard, G.H. Ross, J.G. Ryan, S. Wolff, and J.R. Cronin, Proc. VMIC Conf. (Tampa, FL: Inst. Microelectron. Interconnections, 1991), p. 144.
3. H. Kranenberg, and P.H. Woerlee, J. Electrochem. Soc. 145, 1285 (1998).10.1149/1.1838452 ↗
4. M. Jiang, N. Wood, and R. Komanduri, J. Eng. Mat. Tech. 120, 304 (1998).10.1115/1.2807019 ↗
5. G. Byrne, B. Mullany, and P. Young, Annals of the CIRP, 48, 143 (1999).10.1016/S0007-8506(07)63151-5 ↗
6. F.W. Preston, J. Soc. Glass Technol. 11, 214 (1927).
7. P.A. Burke, Proc. VMIC Conf (Tampa, FL: Inst. Microelectron. Interconnections, 1991), p. 379.
8. J. Warnock, J. Electrochem. Soc. 138, 2398 (1991).10.1149/1.2085984 ↗
9. S.R. Runnels, J. Electrochem. Soc. 141, 1900 (1994).10.1149/1.2055024 ↗
10. S.R. Runnels, J. Electron. Mater. 25, 1574 (1996).10.1007/BF02655578 ↗
11. S.R. Runnels, and L.M. Eyman, J. Electrochem. Soc. 141, 1698 (1994).10.1149/1.2054985 ↗
12. K. Rajan, J. Electron. Mater. 27, 1107 (1998).10.1007/s11664-998-0146-8 ↗
13. J.A. Levert, F.M. Mess, R.E. Salant, S. Danyluk, and A.R. Baker, Tribo. Trans. 41, 593, (1998).10.1080/10402009808983787 ↗
14. F. Zhang, and A. Busnaina, Electrochem. and Solid-State Lett. 1, 184 (1998).10.1149/1.1390679 ↗
15. F.G. Shi, B. Zhao and S.-Q. Wang, 1998, Proc. Int. Interconnect Tech. Conf. 73 (1998).
16. D.O. Ouma, Modeling of Chemical Mechanical Polishing for Dielectric Planarization (Ph.D. Thesis, Dept. Electric. Eng. and Comp. Sci., MIT, 1998).
17. G. Fu, A. Chandra, and S. Guha, Proc. 2000 VMIC Conf. Tampa, FL: Inst. Microelectron. Interconnections, 2000).
18. S. Sivaram, H. Bath, E. Lee, R. Leggett and R. Tolles, 1992 SEMATECH Technical Report (Austin, TX: SEMATECH, 1992).
19. O.G. Chekina, L.M. Kee, and H. Liang, J. Electrochem. Soc. 145, 2100 (1998).10.1149/1.1838603 ↗
20. T.-K. Yu, C.C. Yu, and M. Orlowski, IEDM Tech. Dig. 865 (1993).
21. D. Wang, J. Lee, K. Holland, T. Bibby, S. Beaudoin, and T. Cale. J. Electrochem. Soc. 144, 1121, (1997).10.1149/1.1837542 ↗
22. C. Srinivasa-Murthy, D. Wang, S.P. Beaudoin, T. Bibby, K. Holland, and T.S. Cale, Thin Solid Films 308–309, 533 (1997).
23. S.R. Runnels, and P. Renteln, Dielectric Sci. Technol. 110 (1993).
24. A.R. Baker, Proc. Electrochem. Soc. 96, 228 (1996).
25. Y. Sasaki, H. Aoyama, I. Inasaki, H. Miyairi, and H. Shibaya, Proc. 1998 Spring Topical Meeting on Silicon Machining, 17, 92 (1998).
26. G.M.L. Gladwell, Contact Problems in the Classical Theory of Elasticity, (Groningen, Netherlands: Alphen aan Rijn, Sijthoff and Noordhoff Int. Publ., 1980).10.1007/978-94-009-9127-9 ↗
27. N.I. Muskhelishvili, Some Basic Problems of the Mathematical Theory of Elasticity (Groningen, Netherlands: Alphen aan Rijn, Noordhoff Int., 1975).
28. I.N. Sneddon, Mixed Boundary Value Problem in Potential Theory (Amsterdam: North-Holland Publ. Co., 1996).
29. A.E. Green, and W. Zerna, Theoretical Elasticity (London: Oxford Univ. Press, 1954).
30. S. Wolfram, Mathematica—ASystem for Doing Mathematica by Computer (Redwood City, CA: Addison-Wesley, 1991).
31. G. Fu, and A. Chandra, Tech. Report (Ames IA: Mech. Engr. Dept., Iowa State Univ., 2000).