journal article·2001-09

Investigation of interfacial reaction between Sn-Ag eutectic solder and Au/Ni/Cu/Ti thin film metallization

J. Y. Park, C. W. Yang, J. S. Ha, C. -U. Kim, E. J. Kwon, S. B. Jung, C. S. Kang

Journal of Electronic Materials· Volume 30· Issue 9
Publisher page

Abstract

This paper reports the formation of intermetallic compounds in Au/Ni/Cu/Ti under-bump-metallization (UBM) structure reacted with Ag-Sn eutectic solder. In this study, UBM is prepared by evaporating Au(500 A)/Ni(1000 A)/Cu(7500 A) /Ti (700 A) thin films on top of Si substrates. It is then reacted with Ag-Sn eutectic solder at 260 C for various times to induce different stages of the interfacial reaction. Microstructural examination of the interface, using both chemical and crystallographic analysis, indicates that two types of intermetallic compounds are formed during the interfacial reaction. The first phase, formed at the intial stage of the reaction, is predominantly Ni3Sn4. At longer times the Ni3Sn4 phase transforms into (Cu, Ni)6Sn6, probably induced by interdiffusion of Cu and Ni. At this stage, the underlying Cu layer also reacts with Sn and forms the same phase, (Cu,Ni)6Sn5. As a result, the fully reacted interface is found to consist of two intermetallic layers with the same phase but different morphologies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Intermetallics and Advanced Alloy Properties · Adhesion, Friction, and Surface Interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (13)

Show source-provided references
1. G. Ghosh, J. Electron. Mater. 29, 1182 (2000).10.1007/s11664-000-0011-x ↗
2. S.W. Yoon, C.J. Park, S.H. Hong, J.T. Moon, I.S. Park, and H.S. Chun, J. Electron. Mater. 29, 1233 (2000).10.1007/s11664-000-0018-3 ↗
3. T.M. Korhonen, P. Su, S.J. Hong, M.A. Korhonen, and C.-Y. Li, J. Electron. Mater. 29, 1194, (2000).10.1007/s11664-000-0012-9 ↗
4. P.G. Harris and K.S. Chaggar, Soldering & Surface Mount Technol. 10, 38 (1998).10.1108/09540919810237110 ↗
5. Y. Wu (Ph.D. Thesis, University of North Texas, 1994).
6. J.W. Jang, P.G. Kim, K.N. Tu, D.R. Frear, and P. Thompson, J. Appl. Phys. 85, 8456 (1999).10.1063/1.370627 ↗
7. P.G. Kim, J.W. Jang, T.Y. Lee, and K.N. Tu, J. Appl. Phys. 86, 6746 (1999).10.1063/1.371751 ↗
8. J.Y. Park, J.P. Jung, and C.S. Kang, J. Electron. Mater. 28, 1256 (1999).10.1007/s11664-999-0165-0 ↗
9. P.G. Kim, K.N. Tu, and D.C. Abbott, J. Appl. Phys. 82, 770 (1998).10.1063/1.368136 ↗
10. C.Y. Liu, C. Chen, A.K. Mal, and K.N. Tu, J. Appl. Phys. 85, 3882 (1999).10.1063/1.369779 ↗
11. K. Schuber and U. Roler, Z. Metallkde 41, 298 (1950).
12. J.D. Bemal, Nature 122, 54 (1928).
13. G. Ghosh, Acta Mater. 48, 3719 (2000).10.1016/S1359-6454(00)00165-8 ↗