Effects of solder alloy constitutive relationships on impact force responses of package-level solder joints under ball impact test
Source abstract
Abstract
The ball impact test was developed as a package-level measure for the board-level drop reliability of solder joints in the sense that it leads to fracturing of solder joints around intermetallics, similar to that from a board-level drop test. We investigated numerically the effects of constitutive relationships of solder alloy on transient structural responses of a single package-level solder joint subjected to ball impact testing. This study focused on the characteristics of the ascending part of the impact force profile. According to the piecewise linear stress-strain curve obtained for the Sn-4Ag-0.5Cu solder alloy, parametric studies were performed by varying either segmental moduli or characteristic stresses of the curve at fixed ratios, with regard to the lack of available rate-dependent material properties of solder alloys.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (19)
Show source-provided references
1. E.H. Wong, R. Rajoo, Y.W. Mai, S.K.W. Seah, K.T. Tsai, and L.M. Yap, Proc. 55th Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2005), pp. 1202–1209.
2. H.J. Moon, W.J. Lee, D.Y. Lee, B. Kim, S.W. Kim, T.G. Chung, and H.K. Choi, Proc. 37th International Symposium on Microelectronics (Washington, DC: IMAPS, 2004).
3. Y.-S. Lai, P.-F. Yang, C.-L. Yeh, and C.-I. Tsai, Proc. 6th International Conference on Electronics Materials and Packaging (Piscataway, NJ: IEEE, 2004), pp. 56–60.
4. Y.-S. Lai, P.-F. Yang and C.-L. Yeh, Microelectron. Reliab. 46, 645. (2006).10.1016/j.microrel.2005.07.005 ↗
5. D. Reiff and E. Bradley, Ref. 1, pp. 1519–1525.
6. Y.-S. Lai, P.-C. Yang, C.-L. Yeh, and T.H. Wang, Proc. 38th International Symposium on Microelectronics (Washington DC: IMAPS, 2005), pp. 199–205.
7. K. Newman, in Ref. 1, pp. 1194–1201.
8. X. Huang, S.-W.R. Lee, C.C. Yuan, and S. Hui, Proc. 51st Electronic Components and Technology Conference (Piscataway, NJ: IEEE, 2001), pp. 1065–1071.
9. S. Canumalla, H.-D. Yang, P. Viswanadham, and T.O. Reinikainen, IEEE Trans. Comp. Packag. Technol. 27, 182 (2004).10.1109/TCAPT.2004.825785 ↗
10. C.-L. Yeh and Y.-S. Lai, J. Electron. Packag., ASME (in press).
11. M. Date, T. Shoji, M. Fujiyoshi, K. Sato, and K.N. Tu, Scripta Mater. 51, 641 (2004).10.1016/j.scriptamat.2004.06.027 ↗
12. S. Ou, Y. Xu, K.N. Tu, M.O. Alam, and Y.C. Chan, in Ref. 1, pp. 467–471.
13. C.-L. Yeh, Y.-S. Lai, H.-C. Chang, and T.-H. Chen, Proc. 7th Electronics Packaging Technology Conference (Piscataway, NJ: IEEE, 2005), pp. 270–275.
14. J.Y.H. Chia, B. Cotterell, and T.C. Chai, Mater. Sci. Eng. A 417, 259 (2006).10.1016/j.msea.2005.10.064 ↗
15. C.-L. Yeh, Y.-S. Lai, and P.-F. Yang, Proc. 9th IMAPS Topical Workshop on Flip Chip Technologies (Washington DC: IMAPS, 2004).
16. C.-L. Yeh and Y.-S. Lai, Proc. 2004 Taiwan ANSYS Conference (Taipei, Taiwan: Taiwan Auto-design Co., 2004), pp. 25–30.
17. C.-L. Yeh and Y.-S. Lai, Proc. 6th Electronics Packaging Technology Conference (Piscataway, NJ: IEEE, 2004), pp. 689–694.
18. C.-L. Yeh and Y.-S. Lai, Proc. EuroSimE 2005 (Piscataway, NJ: IEEE, 2005), pp. 503–509.
19. C.-L. Yeh and Y.-S. Lai, Microelectron. Reliab. 46, 885 (2006).10.1016/j.microrel.2005.07.113 ↗