Residual-mechanical behavior of thermomechanically fatigued Sn-Ag based solder joints
Source abstract
Abstract
Thermomechanical fatigue (TMF) due to the mismatch in coefficients of thermal expansion between solder and substrate gradually degrades the mechanical properties of electronic solder joints during service. This study investigated the role of TMF on the residual-mechanical behavior of solder joints made with eutectic Sn-Ag solder and Sn-Ag solder with Cu or Ni additions. The TMF tests were carried out between -15°C and + 150°C with a ramp rate of 25°C/min for the heating segment and 7°C/min for the cooling segment. The hold times were 20 min at the high extreme and 300 min at the low extreme. Residual shear strength was found to drop significantly during the first 250 TMF cycles, although it did remain relatively constant between 250 and 1000 cycles. Alloying elements were found to affect the residual creep strength of solder joints after TMF.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. K.N. Subramanian, T.R. Bieler, and J.P. Lucas, J. Electron. Mater. 28 (11), 1176 (1999).10.1007/s11664-999-0154-3 ↗
2. S. Choi, K.N. Subramanian, J.P. Lucas, and T.R. Bieler, J. Electron. Mater. 29, 1249 (2000).10.1007/s11664-000-0020-9 ↗
3. K.N. Subramanian, A. Lee, S. Choi, and P. Sonje, J. Electron. Mater. 30 (4), 372 (2001).10.1007/s11664-001-0046-7 ↗
4. A.W. Gibson, S. Choi, T.R. Bieler, and K.N. Subramanian, IEEE Int. Symp. on Electronics and Environment (Piscataway, NJ: IEEE, 1997), pp. 246–251.
5. Y. Kariya and M. Otsuka, J. Electron. Mater. 27 (7), 866 (1998).10.1007/s11664-998-0111-6 ↗
6. M. McCormack and S. Jin, 1994 IEEE/CPMT 16th Int. Electronics Manufacturing Technology Symp. (Piscataway, NJ: IEEE, 1994a), vol. 1, p. 7.10.1109/IEMT.1994.404698 ↗
7. M. McCormack and S. Jin, J. Electron. Mater. 23 (7), 595 (1994b).10.1007/BF02653344 ↗
8. A. Dasgupta, P. Sharma, and K. Upadhyayui, Int. J. Damage Mech. 10, 101 (2001).10.1106/NM1B-1UQH-DJCT-4YH1 ↗
9. Y.H. Pao, S. Badgley, R. Govila, and E. Jih, Fatigue of Electronic Materials, ed. S.A. Schroeder and M.R. Mitchell (Philadelphia, PA: ASTM, 1994), pp. 60–81.10.1520/STP23916S ↗
10. H.L.J. Pang, K.H. Tan, X.Q. Shi, and Z.P. Wang, Mater. Sci. Eng. A307, 42 (2001).10.1016/S0921-5093(00)01958-4 ↗
11. W.W. Lee, L.T. Nguyen, and G.S. Selvaduray, Microelectr. Reliability 40, 231 (2000).10.1016/S0026-2714(99)00061-X ↗
12. S. Choi, J.G. Lee, K.N. Subramanian, J.P. Lucas, and T.R. Bieler, J. Electron. Mater., 31 (4), 292 (2002).10.1007/s11664-002-0146-z ↗
13. Y. Karita, Y. Hirata, and M. Ostuka, J. Electron. Mater. 28 (11), 1263 (1999).10.1007/s11664-999-0166-z ↗
14. N.M. Poon, C.M. Lawarence Wu, Joseph K.L. Lai, and Y.C. Chan, IEEE Trans. Adv. Packaging 23 (4), 708 (2000).10.1109/6040.883762 ↗
15. S. Ahat, M. Sheng, and L. Luo, J. Mater. Res. 16 (10), 2914 (2001).
16. S. Choi, T.R. Bieler, J.P. Lucas, and K.N. Subramanian, J. Electron. Mater. 28 (11), 1209 (1999).10.1007/s11664-999-0159-y ↗
17. A.W. Gibson, S. Choi, K.N. Subramanian, and T.R. Bieler, Reliability of Solders and Solder Joints, ed. R.K. Mahidhara, D.R. Frear, S.M.L. Sastry, K.L. Murty, P.K. Liaw, and W.L. Winterbottom (Warrendale, PA: TMS, 1997), pp. 97–103.
18. J.P. Lucas, F. Guo, J. Mcdougall, T.R. Bieler, K.N. Subramanian, and J.K. Park, J. Electron Mater. 22, 1268 (1999).
19. F. Guo, J. Lee, J.P. Lucas, K.N. Subramanian, and T.R. Bieler, J. Electron. Mater. 30 (9), 1222 (2001).10.1007/s11664-001-0153-5 ↗
20. F. Guo, S. Choi, K.N. Subramanian, T.R. Bieler, J.P. Lucas, A. Achari, and M. Paruchuri, Mater. Sci. Eng., submitted for publication.
21. R. Darveaux and K. Banerji, 1992 42nd Electronic Components and Technology Conf. (ECTC) (Piscataway, NJ: IEEE, 1992), p. 538.
22. D.P.H. Hasselman, J. Am. Ceram. Soc. 52 (11), 600 (1969).10.1111/j.1151-2916.1969.tb15848.x ↗