Modeling for the Hybrid Schottky Junction: MXene/MAPbI3
Source abstract
Abstract
A hybrid MXene/MAPbI3 Schottky junction was fabricated and systematically investigated through temperature-dependent current–voltage (I–V) and capacitance–voltage (C–V) analysis in the temperature range of 280–310 K. The device structure and energy band alignment at the MXene/MAPbI3 interface confirm the formation of a rectifying Schottky barrier. Analysis of the forward-bias I–V characteristics reveals thermally activated carrier transport governed by thermionic emission, with an effective barrier height that decreases linearly with temperature. The extracted temperature coefficient of the barrier height is βφ ≈ 4.3 × 10−4 eV K−1, indicating significant interface-state contributions to the transport process. Log–log I–V characteristics exhibit a power-law dependence (I ∝ Vᵐ), with the exponent m decreasing with increasing temperature, consistent with trap-controlled space-charge-limited conduction at low bias and enhanced carrier injection at elevated temperatures. Reverse-bias currents increase monotonically with temperature, further supporting thermally assisted emission over the Schottky barrier. High-frequency C–V analysis shows pronounced frequency dispersion in the Mott–Schottky plots, confirming the presence of interface states at the MXene/MAPbI3 junction. Corrected capacitance analysis yields a built-in voltage of approximately 0.7 V and a donor concentration of ~7.6 × 1014 cm−3. A direct current (DC) and high-frequency equivalent circuit model is proposed, incorporating depletion resistance, MXene sheet resistance, series resistance, and junction capacitance, which accurately describes both the DC transport and alternating current (AC) response of the hybrid Schottky device.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: MXene and MAX Phase Materials · 2D Materials and Applications · Advanced Thermoelectric Materials and Devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. Z. Wang, G. Yang, T. Yang, J. Dang, H. Yang, R. Feng, X. Xu, Q. Pang, and S. Yun, Heteroatom doping strategy to construct hierarchical 3D/2D P-CoSe2/Ti3C2Tx reinforced Mott-Schottky barrier for advanced energy conversion applications. J. Colloid Interface Sci. 705, 139478 (2026).10.1016/j.jcis.2025.139478 ↗
2. S. Zhang, and C. Bie, A Schottky junction breakthrough for photocatalytic hydrogen evolution. Rare Met. 44(11), 9289 (2025).10.1007/s12598-025-03584-5 ↗
3. G. Deng, Z. Jiang, G. Tang, W. Xi, Y. Zhang, S. Huang, D. Cai, R. Wang, Y. Gong, H. Wang, and J. Jin, MXene/SnS Mott-Schottky heterostructure for modulation of sulfur reduction reaction kinetics in advanced lithium-sulfur batteries. J. Energy Chem. 110, 19 (2025).10.1016/j.jechem.2025.06.033 ↗
4. J. Ni, V. Boffa, X. Sun, T. Ohno, L. Sarasino, M.C. Paganini, and P. Calza, Self-assembly synthesis of gallium-doped polymeric carbon nitride/Ti3C2 MXene Schottky junction for efficient photosynthesis of hydrogen peroxide. Appl. Surf. Sci. 704, 163373 (2025).10.1016/j.apsusc.2025.163373 ↗
5. J. Ghosh, and P.K. Giri, Recent advances in perovskite/2D materials based hybrid photodetectors. J. Phys. Mater. 4(3), 032008 (2021).10.1088/2515-7639/abf544 ↗
6. L. Luo, Y. Huang, K. Cheng, A. Alhassan, M. Alqahtani, L. Tang, Z. Wang, and J. Wu, MXene–GaN van der Waals metal-semiconductor junctions for high performance multiple quantum well photodetectors. Light Sci. Appl. 10(1), 177 (2021).10.1038/s41377-021-00619-1 ↗
7. Y. Zhao, Y. Zhu, C. Xi, K. Hu, S. Han, and J. Jiang, Manipulating NiS2/MXene-induced Mott-Schottky heterostructures via precursor doping strategy for promoting alkaline electrocatalytic overall water splitting. Appl. Catal. B Environ. Energy 378, 125611 (2025).10.1016/j.apcatb.2025.125611 ↗
8. Q. Zhang, H. Yang, Y. Liang, X. Zhang, F. Niu, Y. Ai, G. Xu, and L. Yang, Constructing zincophilic BiOI–MXene heterostructure interfacial layer for high-performance zinc anode. J. Colloid Interface Sci. 704, 139261 (2026).10.1016/j.jcis.2025.139261 ↗
9. Z. Asghar, J. Jrar, A. Alauddin, F.K. Butt, X. Wang, M. Tahir, K. Zheng, Y. Zhang, and J. Hou, Engineering electronic bridge and Schottky modulation via strontium hydroxide nanoparticles on g-C3N4/Ti3C2 for excellent photocatalytic H2 production and CO2 reduction. Renew. Energy 257, 124741 (2026).10.1016/j.renene.2025.124741 ↗
10. Z.B. Sayan, N.G. Erdem, and E.B. Simsek, Rod-like BCN decorated Ti3C2 MXene nanosheets for synergistic photocatalytic tetracycline degradation and hydrogen evolution under visible light. Mater. Chem. Phys. 347, 131483 (2026).10.1016/j.matchemphys.2025.131483 ↗
11. V. Soni, P. Singh, H.H.P. Quang, A.A.P. Khan, A. Bajpai, Q.V. Le, V.K. Thakur, S. Thakur, V.-H. Nguyen, and P. Raizada, Emerging architecture titanium carbide (Ti3C2Tx) MXene based photocatalyst toward degradation of hazardous pollutants: recent progress and perspectives. Chemosphere 293, 133541 (2022).10.1016/j.chemosphere.2022.133541 ↗
12. X. He, X. Zhang, Q. Zheng, J. Yuan, and J. Cao, Two birds with one stone: dual-functional MXene/WS2/Au NPs heterostructures for Staphylococcus aureus photoelectrochemical assay and broad-spectrum antibacterial properties. Sens. Actuators B Chem. 448, 139029 (2026).10.1016/j.snb.2025.139029 ↗
13. C. Hou, J. Zhao, D. Yu, T. Jia, J. Li, L. Deng, Y. Wang, and D. Su, High-efficiency inverted ternary polymer solar cells with optimized morphology of active layers enabled by Ti3C2Tx nanosheets. J. Alloy. Compd. 1019, 179289 (2025).10.1016/j.jallcom.2025.179289 ↗
14. Y. Zhu, L. Lin, M. Zhou, H. Li, Y. Wang, S. Xu, and Z. Li, Regulating the oxygen vacancies on the Ti3C2Tx/BiOCl Schottky heterojunction for highly efficient photoreduction of CO2 to CH4. Sep. Purif. Technol. 379, 134865 (2025).10.1016/j.seppur.2025.134865 ↗
15. X. Wei, Y. Sun, Y. Zhang, B. Yu, and H. Yu, A X-bit optimized 2D solid solution Ti3CNTx MXene as the electron transport layer toward high-performance perovskite solar cells. Nano Energy 133, 110513 (2025).10.1016/j.nanoen.2024.110513 ↗
16. S. Marimuthu, A.P. Shyma, S. Sathyanarayanan, T. Gopal, J.T. James, S.P. Nagalingam, B. Gunaseelan, S. Babu, R. Sellappan, and A.N. Grace, The dawn of MXene duo: revolutionizing perovskite solar cells with MXenes through computational and experimental methods. Nanoscale 16(2024), 10108 (2024).10.1039/D4NR01053A ↗
17. L. Zhang, J. Guo, X. Fang, X. Guan, M. Lin, and J. Lin, Ti3C2Tx/self-assembled monolayer composite interface for enhanced hole transport in inverted perovskite solar cells. ACS Appl. Nano Mater. 8, 6144 (2025).10.1021/acsanm.5c00290 ↗
18. N.T. Dlamini, B.C. Tladi, Z.P. Tshabalala, H.C. Swart, and D.E. Motaung, Synergistic Schottky barrier effect in SrTiO3/Ti3C2Tx for near-room temperature toluene detection. Mater. Chem. Phys. 349, 131823 (2026).10.1016/j.matchemphys.2025.131823 ↗
19. V.V. Brus, M. Zellmeier, X. Zhang, S.M. Greil, M. Gluba, A.J. Töfflinger, J. Rappich, and N.H. Nickel, Electrical and photoelectrical properties of P-COSE2/n-Si hybrid organic–inorganic heterojunction solar cells. Org. Electron. 14, 3109 (2013).10.1016/j.orgel.2013.07.021 ↗
20. M. Daniel, J. Rafi, S. Reza, R. Thapa, S. Mathur, and B. Neppolian, Enhancing host-guest interactions through interfacial modulation of IRMOF-MXene hybrids: a detailed study on the significance of accessible functional groups in electrochemical detection. Mater. Res. Bull. 192, 113611 (2025).10.1016/j.materresbull.2025.113611 ↗
21. S. Samiei, A. Kalantarian, A. Iraji Zad, and N. Darmiani, Room-temperature ethylene glycol sensor based on cuprous oxide/MXene films. Sci. Rep. 15, 28639 (2025).10.1038/s41598-025-12019-1 ↗
22. S. Panigrahi, S. Jana, T. Calmeiro, E. Fortunato, M.J. Mendes, and R. Martins, MXene-enhanced nanoscale photoconduction in perovskite solar cells revealed by conductive atomic force microscopy. ACS Appl. Mater. Interfaces 16, 1930 (2024).10.1021/acsami.3c16245 ↗
23. Z. Shen, M. Pu, Y. Xie, J. Liu, S. Zhu, L. Wei, W. Zheng, L. Zhang, X. Wang, C. Zhang, B. Xu, and M. Huang, Precise construction of S-scheme and dual Schottky junctions in g-C3N5/TiO2-Ov@Ti3C2 ternary heterojunction for efficient visible-light acetaminophen degradation: enhanced oriented charge migration. Chem. Eng. J. 525, 170199 (2025).10.1016/j.cej.2025.170199 ↗
24. W. Huang, L. Ding, D. Wang, P. Cai, J. Wang, R. Gao, H. Hu, Y. Ye, C. Huang, X. Xue, H. Peng, and L. Sun, Tetrabutylammonium hydroxide-functionalized Ti3C2Tx MXene for significantly improving the photovoltaic performance of perovskite solar cells. ACS Appl. Mater. Interfaces 16, 63569 (2024).10.1021/acsami.4c13540 ↗
25. M. Karimipour, A. Paingott Parambil, K.T. Tanko, T. Zhang, F. Gao, and M. Lira-Cantu, Functionalized MXene/halide perovskite heterojunctions for perovskite solar cells stable under real outdoor conditions. Adv. Energy Mater. 13(44), 2301959 (2023).10.1002/aenm.202301959 ↗
26. R. Ma, S. Rao, J. Xie, C. Chen, C. Zhi, H. Chen, Q. Liu, and J. Yang, In situ construction of vertical-TiO2/MXene Schottky heterojunction with enhanced bacterial capture for synergistic photothermal and photocatalytic antibacterial effects. Appl. Surf. Sci. 710, 164011 (2025).10.1016/j.apsusc.2025.164011 ↗
27. A. Lu, D. Jiang, L. Pan, X. Du, X. Shan, W. Wang, H. Shiigi, W. Zhang, and Z. Chen, Defect and interface engineered hierarchical g-C3N4 Nanotube/Nb2C MXene Schottky heterojunctions: synergistic electrochemiluminescence enhancement and passivation mitigation for high-performance sensing. Chem. Eng. J. 523, 168386 (2025).10.1016/j.cej.2025.168386 ↗
28. S. Merci, T. Shamspur, and A. Mostafavi, Fabrication of novel tin-doped TiO2/Ti3C2 MXene photocatalyst for enhanced visible light-driven degradation of rhodamine B and dinoseb: response surface methodology optimization. Mater. Sci. Eng. B 321, 118574 (2025).10.1016/j.mseb.2025.118574 ↗