Thermomechanical and Fatigue Analysis of SiC Power Modules with a Comparison of Sintered Silver and Copper Die Attaches
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Silicon Carbide Semiconductor Technologies · Advanced ceramic materials synthesis · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. T.J. Flack, B.N. Pushpakaran, and S.B. Bayne, GaN Technology for Power Electronic Applications: A Review. J. Electron. Mater. 45(6), 2673–2682 (2016).10.1007/s11664-016-4435-3 ↗
2. H. Bencherif, L. Dehimi, F. Pezzimenti, G. De Martino, and F.G. Della Corte, Multiobjective Optimization of Design of 4H-SiC Power MOSFETs for Specific Applications. J. Electron. Mater. 48(6), 3871–3880 (2019).10.1007/s11664-019-07142-5 ↗
3. C. Chen, D. Kim, Z. Zhang, N. Wakasugi, Y. Liu, M.C. Hsieh, S. Zhao, A. Suetake, and K. Suganuma, Interface-Mechanical and Thermal Characteristics of Ag Sinter Joining on Bare DBA Substrate During Aging, Thermal Shock and 1200 W/cm2 Power Cycling Tests. IEEE Trans. Power Electron. 37(6), 6647–6659 (2022).10.1109/TPEL.2022.3142286 ↗
4. Z. Chen, and A.Q. Huang, Extreme high efficiency enabled by silicon carbide (SiC) power devices. Mater. Sci. Semicond. Process. 172, 108052 (2024).10.1016/j.mssp.2023.108052 ↗
5. C. Wang, G. Li, L. Xu, J. Li, D. Zhang, T. Zhao, R. Sun, and P. Zhu, Low Temperature Sintered Silver Nanoflake Paste for Power Device Packaging and Its Anisotropic Sintering Mechanism. ACS Appl. Electron. Mater. 3(12), 5365–5373 (2021).10.1021/acsaelm.1c00857 ↗
6. M. Wang, Y.H. Mei, J. Jin, S. Chen, X. Li, and G.Q. Lu, Pressureless Sintered-Silver Die-Attach at 180 °C for Power Electronics Packaging. IEEE Trans. Power Electron. 36(11), 12141–12145 (2021).10.1109/TPEL.2021.3074853 ↗
7. H. Fang, C. Wang, S. Zhou, Q. Kang, T. Wang, D. Yang, Y. Tian, and T. Suga, Rapid pressureless and low-temperature bonding of large-area power chips by sintering two-step activated Ag paste. J. Mater. Sci. Mater. Electron. 31(8), 6497–6505 (2020).10.1007/s10854-020-03207-y ↗
8. X. Liu, S. Li, J. Fan, J. Jiang, Y. Liu, H. Ye, and G. Zhang, Microstructural evolution, fracture behavior and bonding mechanisms study of copper sintering on bare DBC substrate for SiC power electronics packaging. J. Mater. Res. Technol. 19, 1407–1421 (2022).10.1016/j.jmrt.2022.05.122 ↗
9. C. Chen, A. Suetake, F. Huo, D. Kim, Z. Zhang, M.C. Hsieh, W. Li, N. Wakasugi, K. Takeshita, Y. Yamaguchi, Y. Momose, and K. Suganuma, Development of SiC Power Module Structure by Micron-Sized Ag-Paste Sinter Joining on Both Die and Heatsink to Low-Thermal-Resistance and Superior Power Cycling Reliability. IEEE Trans. Power Electron. 39(9), 10638–10650 (2024).10.1109/TPEL.2024.3408798 ↗
10. L. Du, K. Liu, D. Hu, O. Bäcke, X. Hu, X. Ji, J. Fan, R.H. Poelma, M.H. Colliander, and G. Zhang, Microstructural and mechanical anisotropy in pressure-assisted sintered copper nanoparticles. Acta Mater. 287, 120772 (2025).10.1016/j.actamat.2025.120772 ↗
11. J. Fan, D. Xu, H. Zhang, C. Qian, X. Fan, and G. Zhang, Experimental Investigation on the Sintering Kinetics of Nanosilver Particles Used in High-Power Electronic Packaging. IEEE Trans. Compon. Packag. Manuf. Technol. 10(7), 1101–1109 (2020).10.1109/TCPMT.2020.2995634 ↗
12. G. Yang, E.L. Lee, K. Yang, F. Wu, L. Zhou, L. Ding, K. Li, and X. Li, Pressure Sintering of Micro-Silver Joints in SiC Power Devices: Optimization of Processing Parameters and FEM Analysis. J. Electron. Mater. 53(3), 1313–1332 (2024).10.1007/s11664-023-10822-y ↗
13. R. Gao, Y.-A. Shen, J. Li, S. He, and H. Nishikawa, Mechanical and microstructural enhancements of Ag microparticle-sintered joint by ultrasonic vibration. J. Mater. Sci. Mater. Electron. 31(23), 21711–21722 (2020).10.1007/s10854-020-04684-x ↗
14. C.-C. Lee, K.-S. Kuo, C.-W. Wang, J.-Y. Chang, W.-K. Han, and T.-C. Chang, Packaging reliability estimation of high-power device modules by utilizing silver sintering technology. Microelectron. Reliab. 114, 113890 (2020).10.1016/j.microrel.2020.113890 ↗
15. S.A. Paknejad, and S.H. Mannan, Review of silver nanoparticle based die attach materials for high power/temperature applications. Microelectron. Reliab. 70, 1–11 (2017).10.1016/j.microrel.2017.01.010 ↗
16. D. Li, Y. Mei, Y. Xin, Z. Li, P.K. Chu, C. Ma, and G.Q. Lu, Reducing Migration of Sintered Ag for Power Devices Operating at High Temperature. IEEE Trans. Power Electron. 35(12), 12646–12650 (2020).10.1109/TPEL.2020.2994343 ↗
17. R. Riva, C. Buttay, B. Allard, and P. Bevilacqua, Migration issues in sintered-silver die attaches operating at high temperature. Microelectron. Reliab. 53(9), 1592–1596 (2013).10.1016/j.microrel.2013.07.103 ↗
18. B. Zhang, A. Damian, J. Zijl, H. van Zeijl, Y. Zhang, J. Fan, and G. Zhang, In-air sintering of copper nanoparticle paste with pressure-assistance for die attachment in high power electronics. J. Mater. Sci. Mater. Electron. 32(4), 4544–4555 (2021).10.1007/s10854-020-05196-4 ↗
19. K. Yasui, S. Hayakawa, and T. Funaki, Reliability Improvement of 3.3 kV Full-SiC Power Modules for Power Cycling Tests With Sintered Copper Die Attach Technology. IEEE Trans. Compon. Packag. Manuf. Technol. 13(9), 1476–1485 (2023).10.1109/TCPMT.2023.3312281 ↗
20. C. Ferreira, A. Ali, M. Fjer, J. Chandrappan, I. Ludtke, G. Calderon-Lopez, A lifetime evaluation of SiC devices bonded with copper and silver sintering, in 13th International Conference on Power Electronics, Machines and Drives (PEMD 2024) (2024), pp. 620–624.10.1049/icp.2024.2217 ↗
21. H. Nakako, M. Natori, D. Ishikawa, M. Negishi, Y. Kawana, Y. Ejiri, Superior Bonding Reliability of Sintered Cu Bonding at Power Cycle Test, in PCIM Europe digital days 2020
22. International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (PCIM Eur. Conf. Proc.) (2020), pp. 1-4.
23. W.S. Hong, M.S. Kim, C. Oh, Y. Joo, Y. Kim, and K.-K. Hong, Pressureless Silver Sintering of Silicon-Carbide Power Modules for Electric Vehicles. JOM 72(2), 889–897 (2020).10.1007/s11837-019-03815-y ↗
24. Y. Gao, S. Takata, C. Chen, S. Nagao, K. Suganuma, A.S. Bahman, and F. Iannuzzo, Reliability analysis of sintered Cu joints for SiC power devices under thermal shock condition. Microelectron. Reliab. 100–101, 113456 (2019).10.1016/j.microrel.2019.113456 ↗
25. M. Shqair, Z. Khatir, A. Ibrahim, A. Halouani, and M. Berkani, Microstructural evolution during the crack propagation at the bond-wire contact area of IGBT power modules upon power cycling. Microelectron. Reliab. 138, 114635 (2022).10.1016/j.microrel.2022.114635 ↗
26. T. Amla, and N. Chawla, Finite Element Method Analysis of Fatigue and Damage in Low-Temperature-Sintered Nano-silver Soldered Joints. J. Electron. Mater. 52(2), 760–772 (2023).10.1007/s11664-022-10097-9 ↗
27. R. Cioban, S. Szőke, D. Zaharie-B, Z. Kórádi, C. Leordean, and S. Simon, Finite element thermal modelling of power MOSFET packages. Microelectron. Reliab. 136, 114629 (2022).10.1016/j.microrel.2022.114629 ↗
28. Y. Yang, Y.C. Tseng, R. Rodriguez, A.D. Callegaro, and A. Emadi, Modeling and Analysis of Silver-Sintered Molybdenum Packaging for SiC Power Modules With Improved Lifetime and Temperature Range. IEEE Trans. Compon. Packag. Manuf. Technol. 11(12), 2102–2113 (2021).10.1109/TCPMT.2021.3126284 ↗
29. X. Huang, Y. Wang, Q. Zhu, Z. Du, L. Zhou, and H. Liu, Thermal creep and fatigue failure of the sintered silver solder in a SiC-IGBT module under power cycling. Eng. Fail. Anal. 154, 107625 (2023).10.1016/j.engfailanal.2023.107625 ↗
30. B.P. Singh, K.R. Choudhury, S. Norrga, K. Kostov, H.P. Nee, Analysis of the Performance of Different Packaging Technologies of SiC Power Modules during Power Cycling Test, in 2023 29th International Workshop on Thermal Investigations of ICs and Systems (THERMINIC) (2023), pp. 1–6.10.1109/THERMINIC60375.2023.10325878 ↗
31. B. Ji, X. Song, E. Sciberras, W. Cao, Y. Hu, and V. Pickert, Multiobjective Design Optimization of IGBT Power Modules Considering Power Cycling and Thermal Cycling. IEEE Trans. Power Electron. 30(5), 2493–2504 (2015).10.1109/TPEL.2014.2365531 ↗
32. T.F. Chen and K.S. Siow, Comparing the Mechanical and Thermal-Electrical Properties of Sintered Copper (Cu) and Sintered Silver (Ag) Joints. J. Alloys Compd. 866, 158783 (2021).10.1016/j.jallcom.2021.158783 ↗
33. T. Suzuki, Y. Yasuda, T. Terasaki, T. Morita, Y. Kawana, D. Ishikawa, M. Nishimura, H. Nakako, K. Kurafuchi, Thermal cycling lifetime estimation of sintered metal die attachment, in 2016 International Conference on Electronics Packaging (ICEP) (2016), pp. 400–404.10.1109/ICEP.2016.7486856 ↗
34. T. Morita, and Y. Yasuda, New Bonding Technique Using Copper Oxide Materials. Mater. Trans. 56(6), 878–882 (2015).10.2320/matertrans.M2014399 ↗
35. K. Yasui, S. Hayakawa, M. Nakamura, D. Kawase, T. Ishigaki, K. Sasaki, T. Tabata, T. Morita, M. Sagawa, H. Matsushima, T. Kobayashi, Improvement of power cycling reliability of 3.3kV full-SiC power modules with sintered copper technology for Tj, max=175°C, in 2018 IEEE 30th International Symposium on Power Semiconductor Devices and ICs (ISPSD) (2018), pp. 455-458.10.1109/ISPSD.2018.8393701 ↗
36. W.S. Hong, and M.S. Kim, Power Cycling Reliability with Temperature Deviation of Pressureless Silver Sintered Joint for Silicon Carbide Power Module. JOM 76(6), 2763–2771 (2024).10.1007/s11837-024-06398-5 ↗
37. B. Hu, J.O. Gonzalez, L. Ran, H. Ren, Z. Zeng, W. Lai, B. Gao, O. Alatise, H. Lu, C. Bailey, and P. Mawby, Failure and Reliability Analysis of a SiC Power Module Based on Stress Comparison to a Si Device. IEEE Trans. Device Mater. Reliab. 17(4), 727–737 (2017).10.1109/TDMR.2017.2766692 ↗
38. P. Ning, J. Liu, D. Wang, Y. Zhang, and Y. Li, Assessing the Fatigue Life of SiC Power Modules in Different Package Structures. IEEE Access 9, 12074–12082 (2021).10.1109/ACCESS.2021.3051631 ↗
39. T. Furukawa, M. Shiraishi, Y. Yasuda, A. Konno, M. Mori, T. Morita, S. Watanabe, T. Arai, M. Nakamura, D. Kawase, High power density side-gate HiGT modules with sintered Cu having superior high-temperature reliability to sintered Ag, in 2017 29th International Symposium on Power Semiconductor Devices and IC's (ISPSD) (2017), pp. 263–266.10.23919/ISPSD.2017.7988910 ↗
40. P. Rajaguru, H. Lu, and C. Bailey, Sintered silver finite element modelling and reliability based design optimisation in power electronic module. Microelectron. Reliab. 55(6), 919–930 (2015).10.1016/j.microrel.2015.03.011 ↗
41. F.L. Henaff, S. Azzopardi, E. Woirgard, T. Youssef, S. Bontemps, and J. Joguet, Lifetime Evaluation of Nanoscale Silver Sintered Power Modules for Automotive Application Based on Experiments and Finite-Element Modeling. IEEE Trans. Device Mater. Reliab. 15(3), 326–334 (2015).10.1109/TDMR.2015.2443055 ↗
42. D. Ishikawa, H. Nakako, Y. Kawana, C. Sugama, M. Negishi, Y. Ejiri, S. Ueda, B.N. An, H. Wurst, B. Leyrer, T. Blank, M. Weber, Copper Die-Bonding Sinter Paste: Sintering and Bonding Properties, in 2018 7th Electronic System-Integration Technology Conference (ESTC) (2018), pp. 01-10.10.1109/ESTC.2018.8546455 ↗
43. H. Nakako, M. Natori, D. Ishikawa, T. Tanaka, Y. Ejiri, Copper Sintering Pastes for Die Bonding, in PCIM Europe digital days 2021
44. International Exhibition and Conference for Power Electronics, Intelligent Motion, Renewable Energy and Energy Management (2021), pp. 1-6.
45. H. Jiang, S. Liang, Y. Xu, and S. Ramachandran, Investigation of Electro-Thermo-Mechanical Degradation and Crack Propagation of Wire Bonds in Power Modules Using Integrated Phase Field Modeling and Finite Element Analysis. IEEE Trans. Power Electron. 40(2), 3600–3609 (2025).10.1109/TPEL.2024.3496542 ↗
46. S.B. Brown, K.H. Kim, and L. Anand, An internal variable constitutive model for hot working of metals. Int. J. Plast. 5(2), 95–130 (1989).10.1016/0749-6419(89)90025-9 ↗
47. M.A. Gharaibeh, and J. Wilde, The variation in Anand model parameters – How does that affect the bond’s response? A comparative study considering sintered Ag bonds. Microelectron. Reliab. 163, 115528 (2024).10.1016/j.microrel.2024.115528 ↗
48. G. Chen, Z.-S. Zhang, Y.-H. Mei, X. Li, D.-J. Yu, L. Wang, and X. Chen, Applying viscoplastic constitutive models to predict ratcheting behavior of sintered nanosilver lap-shear joint. Mech. Mater. 72, 61–71 (2014).10.1016/j.mechmat.2014.02.001 ↗
49. T. Suzuki, Y. Yasuda, T. Terasaki, T. Morita, Y. Kawana, D. Ishikawa, M. Nishimura, H. Nakako, and K. Kurafuchi, Macro- and Micro-Deformation Behavior of Sintered-Copper Die-Attach Material. IEEE Trans. Device Mater. Reliab. 18(1), 54–63 (2018).10.1109/TDMR.2017.2787756 ↗
50. S. Thekkut, R.S. Sivasubramony, A. Raj, Y. Kawana, J. Assiedu, K. Mirpuri, N. Shahane, P. Thompson, and P. Borgesen, Effective Constitutive Relations for Sintered Nano Copper Joints. J. Electron. Packag. 145, 021010 (2022).10.1115/1.4056113 ↗
51. E. Sharon, S.P. Gross, and J. Fineberg, Energy Dissipation in Dynamic Fracture. Phys. Rev. Lett. 76(12), 2117–2120 (1996).10.1103/PhysRevLett.76.2117 ↗
52. W.K. Le, X. Ning, C.B. Ke, M.B. Zhou, and X.P. Zhang, Current density dependent shear performance and fracture behavior of micro-scale BGA structure Cu/Sn–3.0Ag–0.5Cu/Cu joints under coupled electromechanical loads. J. Mater. Sci. Mater. Electron. 30(16), 15184–15197 (2019).10.1007/s10854-019-01891-z ↗
53. C. Peng, Q. Huang, F. Qi, P. Ke, X. Dai, W. Zhu, and L. Wang, Investigation on the Reliability of Die-Attach Structures for Double-Sided Cooling Power Module. IEEE Trans. Compon. Packag. Manuf. Technol. 11(5), 793–801 (2021).10.1109/TCPMT.2021.3065704 ↗
54. J. Jin, Y. Mei, G. Chen, X. Chen, and G.Q. Lu, Modeling of Intergranular Mechanical Fatigue of a Sintered Nanosilver Die Attachment for Power Electronics. IEEE Trans. Compon. Packag. Manuf. Technol. 10(6), 982–989 (2020).10.1109/TCPMT.2020.2965117 ↗
55. H. Yang, Influencing Factors of Fatigue Life of Nano-Silver Paste in Chip Interconnection. J. Electron. Mater. 50(1), 224–232 (2021).10.1007/s11664-020-08501-3 ↗
56. P. Liu, Y. Deng, P. Xu, Z. Zhang, J. Jin, and X. Luo, Mitigating thermal cycling-induced failures in SiC-based hybrid IGBT modules: optimization of solder and reliability enhancements. Eng. Fail. Anal. 176, 109619 (2025).10.1016/j.engfailanal.2025.109619 ↗
57. Y. Huang, H. Deng, Y. Luo, F. Xiao, B. Liu, and X. Tang, Fatigue Mechanism of Die-Attach Joints in IGBTs Under Low-Amplitude Temperature Swings Based on 3D Electro-Thermal-Mechanical FE Simulations. IEEE Trans. Ind. Electron. 68(4), 3033–3043 (2021).10.1109/TIE.2020.2977563 ↗
58. M.-S. Kim, C. Oh, and W.S. Hong, Pressureless Silver Sintering Property of SiC Device and ZTA AMB Substrate for Power Module. J Weld Join 37(2), 15–20 (2019).10.5781/JWJ.2019.37.2.3 ↗
59. X. Wang, Z. Yang, B. Wang, W. Chen, G. Zhang, J. Zhang, J. Fan, and P. Liu, Effect of epoxy resin addition on properties and corrosion behavior of sintered joints in power modules serviced offshore. J. Mater. Res. Technol. 25, 6593–6612 (2023).10.1016/j.jmrt.2023.07.098 ↗
60. F. Steiner, D. Ishikawa, H. Nakako, T. Blank, Copper and silver sintered die-attach compared in HV-H3TRB and thermal shock cycling, in 2023 International Conference on Electronics Packaging (ICEP) (2023), pp. 89–90.10.23919/ICEP58572.2023.10129660 ↗