journal article·2026-02Open access

Influence of Heat Sink Material and Surface Coatings on Passive Cooling Thermal Performance

Xing Qi Lim, Mohd Sharizal Abdul Aziz, C. Y. Khor, Janter Pangaduan Simanjuntak

Journal of Electronic Materials· Volume 55· Issue 2

Abstract

Abstract Effective thermal management of compact heat sinks is essential in electronic packaging. A thorough understanding of the surface coating’s impact on thermal performance is crucial for optimal heat sink design. This paper investigates the effect of different heat sink materials and two types of surface coatings applied to small heat sink. The materials considered included silver, copper, gold, aluminum, tungsten, zinc, tin, and iron. Two coatings are evaluated, namely a high-emissivity composite coating composed of SiO 2 /multi-walled carbon nanotubes (MWCNT)/acrylic, and a low-emissivity silver nanoparticle (AgNP) coating. The thermal performance of coated and uncoated heat sinks under natural convection is simulated using the Ansys Fluent software. The simulation results are validated against previously published experimental results, showing good agreement with temperature deviations below 4% across three measured positions on the heat sink. This study examines the combined effects of material thermal conductivity and surface emissivity on heat dissipation capacity. The findings revealed that superior thermal conductivity promotes heat dissipation, but it becomes less significant at high thermal conductivity. The high-emissivity composite coating enhances the heat sink’s thermal performance by enhancing the radiative heat loss. The AgNP-coated heat sink only shows superior performance when the convective heat transfer coefficient is compared. These findings provide valuable guidelines for engineers and designers in the electronic packaging industry to select suitable coating and heat sink materials, hence contributing to developing more effective and reliable electronic systems with improved thermal management.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Heat Transfer Mechanisms · Heat Transfer and Optimization · Nanofluid Flow and Heat Transfer

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (41)

Show source-provided references
1. A. Naufal bin Samsudin, A.S. Tijani, S.T. Abdulrahman, J. Kubenthiran, and I.K. Muritala, Thermal-hydraulic modeling of heat sink under force convection: investigating the effect of wings on new designs. Alexandria Eng. J. 65, 709 (2022).10.1016/j.aej.2022.10.045 ↗
2. C.J. Ho, Y.J. Hsieh, S. Rashidi, Y. Orooji, and W.M. Yan, Thermal-hydraulic analysis for alumina/water nanofluid inside a mini-channel heat sink with latent heat cooling ceiling-an experimental study. Int. Commun. Heat Mass Transfer (2020). https://doi.org/10.1016/j.icheatmasstransfer.2020.104477.10.1016/j.icheatmasstransfer.2020.104477 ↗
3. E.Z. Ahmad, A. Fazlizan, H. Jarimi, K. Sopian, and A. Ibrahim, Enhanced heat dissipation of truncated multi-level fin heat sink (MLFHS) in case of natural convection for photovoltaic cooling. Case Stud. Therm. Eng. 28, 101578 (2021).10.1016/j.csite.2021.101578 ↗
4. Z. Khattak, and H.M. Ali, Air cooled heat sink geometries subjected to forced flow: a critical review. Int. J. Heat Mass Transfer 130, 141 (2019).10.1016/j.ijheatmasstransfer.2018.08.048 ↗
5. H. Mousavi, A.A. Rabienataj Darzi, M. Farhadi, and M. Omidi, A novel heat sink design with interrupted, staggered and capped fins. Int. J. Therm. Sci. 127, 312 (2018).10.1016/j.ijthermalsci.2018.02.003 ↗
6. S. Feng, M. Shi, H. Yan, S. Sun, F. Li, and T.J. Lu, Natural convection in a cross-fin heat sink. Appl. Therm. Eng. 132, 30 (2018).10.1016/j.applthermaleng.2017.12.049 ↗
7. Y.B. Liu, On thermal structure optimization of a power LED lighting. Procedia Eng 29, 2765 (2012).10.1016/j.proeng.2012.01.387 ↗
8. D. Jeon, and C. Byon, Thermal performance of plate fin heat sinks with dual-height fins subject to natural convection. Int. J. Heat Mass Transf. 113, 1086 (2017).10.1016/j.ijheatmasstransfer.2017.06.031 ↗
9. M. Selvan, M.S. Abdul Aziz, M.A.A.M. Salleh, N.M. Sharif, C.Y. Khor, H.P. Ong, M.R.R.M.A. Zainol, P. Vizureanu, D.P. Burduhos-Nergis, and A.V. Sandu, Influence of fin thickness on the thermal performance and selection of coating method for a bus duct conductor. Coatings 13, 1 (2023).
10. C. S. Yuan and F. A. Mohd, Modeling of natural convection heat transfer of inline pin fin and plate heat sink by computational fluid dynamics, 131 (2022).
11. R.T. Huang, W.J. Sheu, and C.C. Wang, Orientation effect on natural convective performance of square pin fin heat sinks. Int. J. Heat Mass Transf. 51, 2368 (2008).10.1016/j.ijheatmasstransfer.2007.08.014 ↗
12. Y. Huang, S. Shen, H. Li, and Y. Gu, Numerical analysis on the thermal performances of different types of fin heat sink for high-power LED lamp cooling. Therm. Sci. 23, 233 (2017).10.2298/TSCI170623233H ↗
13. Y. Joo, and S.J. Kim, Comparison of thermal performance between plate-fin and pin-fin heat sinks in natural convection. Int. J. Heat Mass Transf. 83, 345 (2015).10.1016/j.ijheatmasstransfer.2014.12.023 ↗
14. N. Habib, M.U.R. Siddiqi, and M. Tahir, Thermal analysis and optimization of L-shape fin heat sink under natural convection using Anova and Taguchi. Therm. Sci. 26, 1519 (2022).10.2298/TSCI210612317H ↗
15. A. Kalyan Charan, R. Uday Kumar, and B. Balunaik, Evaluation of thermal properties by incorporating perforations of various shapes in fins made with aluminum. Mater. Today Proc. 46, 609 (2021).10.1016/j.matpr.2020.11.380 ↗
16. A. Maji, D. Bhanja, and P.K. Patowari, Numerical investigation on heat transfer enhancement of heat sink using perforated pin fins with inline and staggered arrangement. Appl. Therm. Eng. 125, 596 (2017).10.1016/j.applthermaleng.2017.07.053 ↗
17. S.W. Pua, K.S. Ong, K.C. Lai, and M.S. Naghavi, Natural and forced convection heat transfer coefficients of various finned heat sinks for miniature electronic systems. Proc. Inst. Mech. Eng. A J. Power Energy. 233, 249 (2019).10.1177/0957650918784420 ↗
18. J.Y. Choong, K.H. Yu, and M.Z. Abdullah, Numerical assessment on heat transfer performance of double-layered oblique fins micro-channel heat sink with Al2O3 nanofluid. Therm. Sci. 26, 477 (2022).10.2298/TSCI200822142C ↗
19. A. Farzanehnia, M. Khatibi, M. Sardarabadi, and M. Passandideh-Fard, Experimental investigation of multiwall carbon nanotube/paraffin based heat sink for electronic device thermal management. Energy Convers. Manag. 179, 314 (2019).10.1016/j.enconman.2018.10.037 ↗
20. D. Coetzee, M. Venkataraman, J. Militky, and M. Petru, Influence of nanoparticles on thermal and electrical conductivity of composites. Polymers (2020). https://doi.org/10.3390/polym12040742.10.3390/polym12040742 ↗
21. K. Sefiane, and A. Koşar, Prospects of heat transfer approaches to dissipate high heat fluxes: opportunities and challenges. Appl. Therm. Eng. (2022). https://doi.org/10.1016/j.applthermaleng.2022.118990.10.1016/j.applthermaleng.2022.118990 ↗
22. M. Armstrong, M. Sivasubramanian, and N. Selvapalam, Experimental investigation on the heat transfer performance analysis in silver nano-coated double pipe heat exchanger using displacement reaction. Mater. Today Proc. 45, 2482 (2021).10.1016/j.matpr.2020.11.100 ↗
23. W.G. Kwak, M.H. Oh, and M.S. Gong, Preparation of silver-coated cotton fabrics using silver carbamate via thermal reduction and their properties. Carbohydr. Polym. 115, 317 (2015).10.1016/j.carbpol.2014.08.070 ↗
24. S.S. Pungaiah, and C.K. Kailasanathan, Thermal analysis and optimization of nano coated radiator tubes using computational fluid dynamics and Taguchi method. Coatings (2020). https://doi.org/10.3390/coatings10090804.10.3390/coatings10090804 ↗
25. L. Zhang, W. Zhu, G. Qi, H. Li, D. Qi, and S. Qi, Highly thermal conductive and electrically insulating epoxy composites based on zinc-oxide-coated silver nanowires. Polymers (Basel) 14, 1 (2022).
26. Q. H. Tran et al., Corrigendum to “Enhancement of electrical and thermal properties of silver nanowire transparent conductive electrode by Ag coating” [Mater. Sci. Eng. B 278 (2022) 115640] (Materials Science & Engineering B (2022) 278, (S092151072200037X), (https://doi.org/10.1016/j.mseb., Materials Science and Engineering: B 279, 115671 (2022).10.1016/j.mseb ↗
27. T. Tharayil, L. Godson Asirvatham, S. Rajesh, and S. Wongwises, Effect of nanoparticle coating on the performance of a miniature loop heat pipe for electronics cooling applications. J. Heat Transfer (2018). https://doi.org/10.1115/1.4037541.10.1115/1.4037541 ↗
28. M. Meikandan, K. Malarmohan, and E. Hemachandran, Experimental investigation on thermal performance of nano coated surfaces for air-conditioning applications. Therm. Sci. 23, 175 (2017).10.2298/TSCI160825175M ↗
29. H. Zu, W. Dai, Y. Li, K. Li, and J. Li, Analysis of enhanced heat transfer on a passive heat sink with high-emissivity coating. Int. J. Therm. Sci. (2021). https://doi.org/10.1016/j.ijthermalsci.2021.106971.10.1016/j.ijthermalsci.2021.106971 ↗
30. I.A. Fetuga, O.T. Olakoyejo, S.M. Abolarin, S.A. Adio, J.K. Gbegudu, O.O. Adewumi, O. Oluwatusin, K.S. Aderemi, and A.M. de Oliveira Siqueira, Computational fluid dynamics of free convection and radiation on thermal performance of light emitting diode applications with trapezoidal-finned heat sink. Case Studies Thermal Eng. 61, 105078 (2024).10.1016/j.csite.2024.105078 ↗
31. A.K. Rao, and V. Somkuwar, Heat transfer of a tapered fin heat sink under natural convection. Mater. Today Proc. 46, 7886 (2021).10.1016/j.matpr.2021.02.565 ↗
32. M. Selvan, M.S. Abdul Aziz, K.H. Yu, M.S. Nurulakmal, H.P. Ong, and C.Y. Khor, A study on the effect of fin pitch variation on the thermal performance of a bus duct conductor. Int. J. Therm. Sci. 184, 107938 (2023).10.1016/j.ijthermalsci.2022.107938 ↗
33. Ansys Fluent Theory Guide, 2024 R2, https://ansyshelp.ansys.com/public/account/secured?returnurl=/Views/Secured/corp/v242/en/flu_th/x1-120002.2.html. Accessed 26 June 2007.
34. W.E. Forsythe, Smithsonian Physical Tables, 9th ed., (Knovel, 1954).
35. J. Strothman, ISA Handbook of Measurement Equations and Tables, 2nd ed., (ISA, 2006).
36. G.O. Shah, and G. Arora, Analyzing thermal conductivity of composites through different theoretical frameworks. Evergreen 11, 1740 (2024).10.5109/7236826 ↗
37. R. Valov, V. Petkov, and S. Valkanov, Electrochemical deposition of silver on aluminum alloys. Arch. Foundry Eng. 20, 101 (2020).
38. J. Sun, E. Dahlgren, D. Tang, T. O. Keefe, and M. O. Keefe, Deposition of Gold and Silver Surface Finishes Using Organic-Based Solutions, 2004.
39. H. Cesiulis, O. Bersirova, A. Valiuniene, I. Prosycevas, and G. Baltrunas, Structural and Morphological Study of Silver Electrodeposits 10, 1 (2004).
40. W.D. Callister, and D.G. Rethwisch, Materials Science and Engineering: An Introduction (Hoboken: Wiley, 2010).
41. Y. Murakami, Theory of elasticity and stress concentration, Theory of Elasticity and Stress Concentration 0, 1 (2016).10.1002/9781119274063 ↗