Transport Properties of CuInTe2 Thin Films Obtained by the Electrochemical Route
Source abstract
Abstract
CuInTe2 (CIT) thin films were potentiostatically electrodeposited onto cadmium sulfide thin films coated on fluorine doped tin oxide (FTO) glass in an aqueous bath at 75°C by the standard three-electrode system at − 0.7 V and − 0.8 V, with respect to an Ag/AgCl reference electrode. The electrodeposited layers were heat treated at ∼ 80°C in air ambient for 60 min. X-ray diffraction pattern and Raman analysis confirmed the formation of chalcopyrite CIT thin films upon heat treatment. The optical band gap of heat treated CIT films was found to be ∼ 1.0 eV and 0.95 eV deposited at − 0.7 V and − 0.8 V, respectively. Compact and good adhesive growth of CIT layers onto CdS coated FTO substrates is confirmed by field emission scanning electron microscopy. The current density–voltage (J–V) and capacitance–voltage (C–V) measurement was studied to understand the electronic quality of material for development of CIT layers for solar cell applications. The current density was found to be increased by two orders of magnitude upon low-temperature heat treatment. The capacitance–voltage measurement showed sharp depletion and accumulation region. The built in potential was found to be ∼ 60 mV and 145 mV in the as-deposited samples, deposited at − 0.7 V and − 0.8 V, respectively, whereas upon heat treatment it shifted to 159 mV and 210 mV. The capacitance of the CIT films was found to be a function of applied bias and increased with increasing the bias voltage. The depletion width of the heat treated sample was found to be ∼ 20 nm and 200 nm for the sample deposited at − 0.7 V and − 0.8 V, respectively. Thus, the sample deposited at − 0.8 V shows optimum electronic properties and is found to be suitable for opto-electronic applications.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Chalcogenide Semiconductor Thin Films · Quantum Dots Synthesis And Properties · ZnO doping and properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. M.A. Green, K. Emery, Y. Hishikawa, W. Warta, E.D. Dunlop, D.H. Levi, J. Hohl-Ebinger, and A.W.Y. Ho-Baillie, Prog. Photovolt. Res. Appl. 25, 668 (2017).10.1002/pip.2909 ↗
2. http://www.greentechmedia.com/articles/read/First-Solar-Hits- Record-22.1-Conversion-Efficiency-For-CdTe-Solar-Cell .
3. P. Jackson, D. Hariskos, R. Wuerz, W. Wischmann, and M. Powalla, Phys. Status Solidi (RRL) Rapid Res. Lett. 8, 219 (2014).10.1002/pssr.201409040 ↗
4. T. Mise and T. Nakada, Thin Solid Films 518, 5604 (2010).10.1016/j.tsf.2010.04.065 ↗
5. T. Mise and T. Nakada, Prog. Photovolt. Res. Appl. 21, 754 (2013).10.1002/pip.1191 ↗
6. T. Mise and T. Nakada, J. Appl. Phys. 110, 014504 (2011).10.1063/1.3605522 ↗
7. R. Liu, L. Xi, H. Liu, X. Shi, W. Zhang, and L. Chen, Chem. Commun. 48, 3818 (2012).10.1039/c2cc30318c ↗
8. G. Zhou and D. Wang, Phys. Chem. Chem. Phys. 18, 5925 (2016).10.1039/C5CP05129K ↗
9. P. Prabukanthan and R. Dhanasekaran, Mater. Res. Bull. 43, 1996 (2008).10.1016/j.materresbull.2007.10.004 ↗
10. M. Lakhe, S.K. Mahapatra, and N.B. Chaure, Mater. Sci. Eng. B 204, 20 (2016).10.1016/j.mseb.2015.11.005 ↗
11. M. Lakhe and N.B. Chaure, J. Mater. Sci. Eng. 4, 6 (2015).
12. C. Rincon, S.M. Wasim, G. Marin, J.R. Huntzinger, A. Zwick, and J. Galibert, J. Appl. Phys. 85, 3925 (1999).
13. M.R. Ananthan and S. Kasiviswanathan, Sol. Energy Mater. Sol. Cells 93, 188 (2009).10.1016/j.solmat.2008.09.024 ↗
14. K. Ramanathan, G. Teeter, J.C. Keane, and R. Noufi, Thin Solid Films 480–481, 499 (2005).10.1016/j.tsf.2004.11.050 ↗
15. I. Bonalde, E. Medina, M. Rodriguez, S.M. Wasim, G. Marin, C. Rincon, A. Rincon, and C. Torres, Phys. Rev. B 69, 195201 (2004).10.1103/PhysRevB.69.195201 ↗
16. A. Meeder, D. Fuertes Marron, A. Rumberg, MCh Lux-Steiner, V. Chu, and J.P. Conde, J. Appl. Phys. 92, 3016 (2002).10.1063/1.1501745 ↗
17. S.M. Sze and H.S. Poplai, Physics of Semiconductor Devices (New Delhi: Wiley, 1983), p. 249.
18. S.S. Hegedus and W.N. Shafarman, Prog. Photovolt. Res. Appl. 12, 155 (2004).10.1002/pip.518 ↗
19. A.J. Ptak, D.J. Friedman, S. Kurtz, and J. Kiehl, in Prepared for the 31st IEEE Photovoltaics Specialists Conference and Exhibition Lake Buena Vista, Florida January (2005), pp. 3–7.
20. K.A. Abgullah and B. Bakour, Energy Procedia 6, 36 (2011).10.1016/j.egypro.2011.05.005 ↗
21. S. Aharon, S. Gamliel, B.E. Cohen, and L. Etgar, Phys. Chem. Chem. Phys. 16, 10512 (2014).10.1039/C4CP00460D ↗
22. J. Wang, T. Ling, S. Qiao, and X. Du, ACS Appl. Mater. Interfaces 6, 14718 (2014).10.1021/am5041219 ↗