journal article·2025-03

Effects of Interaction Between Sn-Rich and Pb-Rich Phases on the Mechanical Properties of Sn-Pb Eutectic Solder Alloy at Cryogenic Temperature

Qi An, Minghua Zhang, Ningning Wang, Jingming Fei

Journal of Electronic Materials· Volume 54· Issue 3
Publisher page

Abstract

No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.

Source: Not provided · Quality: missing

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. K.N. Tu, and K. Zeng, Tin–lead (Sn-Pb) solder reaction in flip chip technology. Mater. Sci. Eng. R. Rep. 34(1), 1–58 (2001). https://doi.org/10.1016/S0927-796X(01)00029-8.10.1016/S0927-796X(01)00029-8 ↗
2. M.W. Woodmansee, and R.W. Neu, Effect of stress and strain state on heterogeneous coarsening in Sn-Pb solder. Acta Mater. 54, 197 (2006). https://doi.org/10.1016/j.actamat.2005.08.042.10.1016/j.actamat.2005.08.042 ↗
3. K.C.R. Abell, and Y.L. Shen, Deformation induced phase rearrangement in near eutectic tin–lead alloy. Acta Mater. 50, 3191 (2002). https://doi.org/10.1016/S1359-6454(02)00135-08.042.10.1016/S1359-6454(02)00135-08.042 ↗
4. K.C.R. Abell, and Y.L. Shen, Deformation induced phase rearrangement in near eutectic tin–lead alloy. Acta Mater. 50, 3191 (2002). https://doi.org/10.1016/S1359-6454(02)00135-000010-3.10.1016/S1359-6454(02)00135-000010-3 ↗
5. K. Zeng, and K.N. Tu, Six cases of reliability study of Pb-free solder joints in electronic packaging technology. Mater. Sci. Eng. R. Rep. 38(2), 55 (2002). https://doi.org/10.1016/S0927-796X(02)00007-4.10.1016/S0927-796X(02)00007-4 ↗
6. E. George, and M. Pecht, RoHS compliance in safety and reliability critical electronics. Microelectron. Reliab. 65, 1 (2016). https://doi.org/10.1016/j.microrel.2016.07.150.10.1016/j.microrel.2016.07.150 ↗
7. R. Kikuchi, I. Shohji, Y. Saitoh, N. Nemoto, T. Nakagawa, N. Ebihara, and F. Iwase, Effect of aging on tensile properties and microstructures of eutectic Sn-Pb solder with small amounts of Au and Pd for aerospace application, in Proceedings of the ASME 2011 Pacific Rim Technical Conference and Exhibition on Packaging and Integration of Electronic and Photonic Systems, vol 2, pp. 667–672 (2011). https://doi.org/10.1115/IPACK2011-5202510.1115/IPACK2011-52025 ↗
8. R. Tian, Y. Tian, C. Wang, and L. Zhao, Mechanical properties and fracture mechanisms of Sn-3.0 Ag-0.5 Cu solder alloys and joints at cryogenic temperatures. Mater. Sci. Eng. A 684, 697 (2017). https://doi.org/10.1016/j.msea.2016.12.058.10.1016/j.msea.2016.12.058 ↗
9. R. Tian, C. Hang, Y. Tian, and L. Zhao, Growth behavior of intermetallic compounds and early formation of cracks in Sn-3Ag-0.5 Cu solder joints under extreme temperature thermal shock. Mater. Sci. Eng. A 709, 125 (2018). https://doi.org/10.1016/j.msea.2017.10.007.10.1016/j.msea.2017.10.007 ↗
10. X. Ji, Q. An, Y. Xia, R. An, R. Zheng, and C. Wang, Maximum shear stress-controlled uniaxial tensile deformation and fracture mechanisms and constitutive relations of Sn–Pb eutectic alloy at cryogenic temperatures. Mater. Sci. Eng. A 819, 141523 (2021). https://doi.org/10.1016/j.msea.2021.141523.10.1016/j.msea.2021.141523 ↗
11. W.J. Plumbridge, and C.R. Gagg, Effects of strain rate and temperature on the stress–strain response of solder alloys. J. Mater. Sci. Mater. Electron. 10, 461 (1999). https://doi.org/10.1023/A:1008930430875.10.1023/A:1008930430875 ↗
12. B.L. Boyce, L.N. Brewer, M.K. Neilsen, and M.J. Perricone, On the strain rate-and temperature-dependent tensile behavior of eutectic Sn–Pb solder. J. Electron. Pack. 133(3), 031009 (2011). https://doi.org/10.1115/1.4004846.10.1115/1.4004846 ↗
13. P. Ratchev, T. Loccufier, B. Vandevelde, B. Verlinden, S. Teliszewski, D. Werkhoven, and B. Allaert, A study of brittle to ductile fracture transition temperatures in bulk Pb-free solders, in 15th European Microelectronics and Packaging Conference and Exhibition (EMPC), pp. 248–252 (2005). https://lirias.kuleuven.be/handle/123456789/202861
14. Q. An, R. An, C. Wang, and H. Wang, Ductile-to-brittle transition in fracture behaviors of common solder alloys over a temperature range down to− 150° C. Mater. Today Commun. 29, 102962 (2021). https://doi.org/10.1016/j.mtcomm.2021.102962.10.1016/j.mtcomm.2021.102962 ↗
15. J.M. Park, J. Moon, J.W. Bae, D.H. Kim, Y.H. Jo, S. Lee, and H.S. Kim, Role of BCC phase on tensile behavior of dual-phase Al0.5CoCrFeMnNi high-entropy alloy at cryogenic temperature. Mater. Sci. Eng. ASci. Eng. A 746, 271 (2019). https://doi.org/10.1016/j.msea.2019.01.041.10.1016/j.msea.2019.01.041 ↗
16. M. Bönisch, Y. Wu, and H. Sehitoglu, Twinning-induced strain hardening in dual-phase FeCoCrNiAl0.5 at room and cryogenic temperature. Sci. Rep. 8(1), 10663 (2018). https://doi.org/10.1038/s41598-018-28784-1.10.1038/s41598-018-28784-1 ↗
17. W. Abuzaid, and H. Sehitoglu, Plastic strain partitioning in dual phase Al13CoCrFeNi high entropy alloy. Mater. Sci. Eng. A 720, 238–247 (2018). https://doi.org/10.1016/j.msea.2018.02.044.10.1016/j.msea.2018.02.044 ↗
18. K. Lin, W. Li, C. Yu, S. Jiang, Y. Cao, Q. Li, J. Chen, M. Zhang, M. Xia, Y. Chen, and K. An, High performance and low thermal expansion in Er-Fe-V-Mo dual-phase alloys. Acta Mater. 198, 271–280 (2020). https://doi.org/10.1016/j.actamat.2020.08.012.10.1016/j.actamat.2020.08.012 ↗
19. D. Yu, H. Bei, Y. Chen, E.P. George, and K. An, Phase-specific deformation behavior of a relatively tough NiAl–Cr (Mo) lamellar composite. Scr. Mater. 84, 59 (2014). https://doi.org/10.1016/j.scriptamat.2014.04.025.10.1016/j.scriptamat.2014.04.025 ↗
20. D. Song, G. Wang, F. Yang, H. Chen, N. Liang, H. Ma, J. Jiang, and X. Ma, Microstructure and deformation behavior of a novel steel rebar: Effect of the heterogeneous microstructure of soft ferrite and Hard bainite. J. Mater. Res. Technol. 9(6), 12281 (2020). https://doi.org/10.1016/j.jmrt.2020.08.085.10.1016/j.jmrt.2020.08.085 ↗
21. Z.S. Ma, Y.C. Zhou, S.G. Long, and C.S. Lu, An inverse approach for extracting elastic–plastic properties of thin films from small scale sharp indentation. J. Mater. Sci. Technol. 28(7), 626 (2012). https://doi.org/10.1016/S1005-0302(12)60108-X.10.1016/S1005-0302(12)60108-X ↗
22. J.N. Silva, D.J. Moutinho, A.L. Moreira, I.L. Ferreira, and O.L. Rocha, Determination of heat transfer coefficients at metal–mold interface during horizontal unsteady-state directional solidification of Sn–Pb alloys. Mater. Chem. Phys. 130, 179 (2011). https://doi.org/10.1016/j.matchemphys.2011.06.032.10.1016/j.matchemphys.2011.06.032 ↗
23. M.C. Schneider, and C. Beckermann, A numerical study of the combined effects of microsegregation, mushy zone permeability and fllow, caused by volume contraction and thermosolutal convection, on macrosegregation and eutectic formation in binary alloy solidification. Int. J. Heat Mass Transf. 38(18), 3455 (1995). https://doi.org/10.1016/0017-9310(95)00054-D.10.1016/0017-9310(95)00054-D ↗
24. C. Frueh, D.R. Poirier, and S.D. Felicelli, Predicting freckle-defects in directionally solidified Pb–Sn alloys. Mater. Sci. Eng. A 328, 245 (2002). https://doi.org/10.1016/S0921-5093(01)01700-2.10.1016/S0921-5093(01)01700-2 ↗
25. H. Tang, and C. Basaran, Influence of microstructure coarsening on thermomechanical fatigue behavior of Pb/Sn eutectic solder joints. Int. J. Damage Mech 10, 235 (2001). https://doi.org/10.1106/KFD9-XR1F-VNVE-95XN.10.1106/KFD9-XR1F-VNVE-95XN ↗
26. W. Dreyer, and W.H. Mueller, Modeling diffusional coarsening in eutectic tin/lead solders: a quantitative approach. Int. J. Solids Struct. 38(8), 1433 (2001). https://doi.org/10.1016/S0020-7683(00)00103-7.10.1016/S0020-7683(00)00103-7 ↗
27. X. Long, S. Wang, X. He, and Y. Yao, Annealing optimization for tin–lead eutectic solder by constitutive experiment and simulation. J. Mater. Res. 32, 3089 (2017). https://doi.org/10.1557/jmr.2017.166.10.1557/jmr.2017.166 ↗
28. W. Cai, Q. Song, H. Ji, and Z. Liu, Dual-phase morphology distribution effects on mechanical behaviors of Ti6Al4V via pseudorandom crystal plasticity modeling. J. Mater. Res. Technol. 17, 2897 (2022).10.1016/j.jmrt.2022.02.053 ↗
29. J. Zhou, A.M. Gokhale, A. Gurumurthy, and S.P. Bhat, Realistic microstructural RVE-based simulations of stress–strain behavior of a dual-phase steel having high martensite volume fraction. Mater. Sci. Eng. A 630, 107 (2015). https://doi.org/10.1016/j.msea.2015.02.017.10.1016/j.msea.2015.02.017 ↗
30. S. Park, J. Jung, W. Cho, B.S. Jeong, H. Na, S.I. Kim, M.G. Lee, and H.N. Han, Predictive dual-scale finite element simulation for hole expansion failure of ferrite-bainite steel. Int. J. Plast. 136, 102900 (2021). https://doi.org/10.1016/j.ijplas.2020.102900.10.1016/j.ijplas.2020.102900 ↗
31. Q. Li, H. Zhang, F. Chen, D. Xu, D. Sui, and Z. Cui, Study on the plastic anisotropy of advanced high strength steel sheet: experiments and microstructure-based crystal plasticity modeling. Int. J. Mech. Sci. 176, 105569 (2020). https://doi.org/10.1016/j.ijmecsci.2020.105569.10.1016/j.ijmecsci.2020.105569 ↗
32. A.K. Rana, S.K. Paul, and P.P. Dey, Effect of martensite volume fraction on cyclic plastic deformation behavior of dual phase steel: micromechanics simulation study. J. Market. Res. 8, 3705 (2019). https://doi.org/10.1016/j.jmrt.2019.06.022.10.1016/j.jmrt.2019.06.022 ↗
33. X. Ji, R. An, W. Zhou, Y. Zhong, F. Guo, and C. Wang, Revealing the ductile-to-brittle transition mechanism in polycrystalline body-centered tetragonal tin (Sn) for cryogenic electronics. J. Alloys Compd. 903, 163948 (2022). https://doi.org/10.1016/j.jallcom.2022.163948.10.1016/j.jallcom.2022.163948 ↗
34. X. Ji, R. An, W. Zhou, Y. Xia, F. Guo, and C. Wang, Anisotropy of hardness and impression morphology in body-centered tetragonal tin (Sn) at cryogenic temperature and room temperature. J. Mater. Sci. Mater. Electron. 34, 325 (2023). https://doi.org/10.1007/s10854-022-09757-7.10.1007/s10854-022-09757-7 ↗