Design and EM Behavioral Study of PET Films for Improved Stealthiness
Source abstract
Abstract
Different types of stealth films and their electromagnetic (EM) behavioral characteristics have been studied to fulfil the stealth requirements of today’s electronic warfare (EW) for military mission success. The EM performance of stealth films has been measured using two different measurement methods: wave guide measurement (WGM) and open area test site (OATS). Polyethylene terephthalate (PET) (sample B1) has been used as the base material to design and fabricate composite stealth films, films N (PET + conductive paint), S (PET + conductive paint + fumed silica), Q (PET + conductive paint + aluminum), and P (PET + conductive paint + aluminum + fumed silica). The conductive paint and fumed silica are used to design and fabricate small unmanned aerial vehicle (sUAV) model stealth frames. The detailed parametric studies of these films and frames have been analyzed in terms of EM wave parameters, S11 (reflection coefficient), S21 (transmission coefficient), I1 (input power at port 1), O1 (output power at port 1), O2 (output power at port 2), Pin (input power incident on sample specimen), Prefle (reflected power at a point close to the transmitter), Ptrans (power transmitted through the sample), SErefle (shielding effectiveness of reflection loss), SEabs (shielding effectiveness of absorption loss), SEtot (total shielding effectiveness), and RCS (σ) (radar cross-section). These parameters have been verified in the X-band frequency operation in the 8- to 12-GHz frequency range. Using these stealth films and frames, the minimum values of S11, S21, and SEtot of − 40 dB, − 0.6 dB, and 0.7 dB, respectively, in WGM and − 75 dB, − 76 dB, and − 75 dB, respectively, in OATS, were achieved. Further, the achieved RCS reduction level falls in the range of 0.09–1.5 m2 over the 8–10.1 GHz frequency range, and in the range 1.6–4 m2 above 10.1 GHz and up to 12 GHz, as presented in this paper. The experimental results give a good agreement between the design material and their EM behaviors, so their suitability for stealth applications is justified.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Antenna and Metasurface Technologies · Electromagnetic wave absorption materials · Electromagnetic Compatibility and Measurements
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (32)
Show source-provided references
1. O. Mustopa, The concept of stealth Unmanned Combat Aerial Vehicle (UCAV) to support air defense systems. Def. Secur. Stud. 3, 74 (2022).
2. W. Liu, W. Wang, K. Jia, M. Li, and D. Wang, A flexible and ultrathin graphene film for electromagnetic interference shielding. in 2020 6th Global Electromagnetic Compatibility Conference (GEMCCON) 1–4 (2020).10.1109/GEMCCON50979.2020.9456678 ↗
3. F. Micciulla, P. Ulpiani, A. Cataldo, S. Bistarelli, and S. Bellucci, Ageing effects on composite nano carbon based materials. in 2017 International Semiconductor Conference (CAS) 37–42 (2017).10.1109/SMICND.2017.8101148 ↗
4. H. I. Keskin, S. Ozen, K. Ates, and L. N. Polat, Analysis and Measurement of the Electromagnetic Shielding Efficiency of the Multi-Layered Carbon Fiber Composite Fabrics. in 2019 PhotonIcs & Electromagnetics Research Symposium - Spring (PIERS-Spring) 4354–4360 (2019).10.1109/PIERS-Spring46901.2019.9017787 ↗
5. T. Lai, W. Qin, C. Cao, R. Zhong, Y. Ling, and Y. Xie, Preparation of a microwave-absorbing UV coating using a BaFe12O19-polypyrrole nanocomposite filler. Polymers 15, 1839 (2023).10.3390/polym15081839 ↗
6. A.R. Pai, N. Puthiyaveettil Azeez, B. Thankan, N. Gopakumar, M. Jaroszewski, C. Paoloni, N. Kalarikkal, and S. Thomas, Recent progress in electromagnetic interference shielding performance of porous polymer nanocomposites—a review. Energies 15, 3901 (2022).10.3390/en15113901 ↗
7. E. Sepulveda and H. Smith, Technology challenges of stealth unmanned combat aerial vehicles. Aeronaut. J. 121, 1261 (2017).10.1017/aer.2017.53 ↗
8. Z. Zhang, J. Jiang, J. Wu, and X. Zhu, Efficient and optimal penetration path planning for stealth unmanned aerial vehicle using minimal radar cross-section tactics and modified A-Star algorithm. ISA Trans. 134, 42 (2023).10.1016/j.isatra.2022.07.032 ↗
9. H. Shakhatreh, A.H. Sawalmeh, A. Al-Fuqaha, Z. Dou, E. Almaita, I. Khalil, N.S. Othman, A. Khreishah, and M. Guizani, Unmanned aerial vehicles (UAVs): a survey on civil applications and key research challenges. IEEE Access 7, 48572 (2019).10.1109/ACCESS.2019.2909530 ↗
10. P. Yang, A study on development of intelligent ground-based air defense radar under the background of modern war. J. Phys. Conf. Ser. 2252, 012068 (2022).10.1088/1742-6596/2252/1/012068 ↗
11. P. Sahoo, L. Saini, and A. Dixit, Microwave-absorbing materials for stealth application: a holistic overview. Oxford Open Mater. Sci. 3, itac012 (2023).10.1093/oxfmat/itac012 ↗
12. A. Kumar and S. Singh, Development of coatings for radar absorbing materials at X-band. IOP Conf. Ser. Mater. Sci. Eng. 330, 012006 (2018).10.1088/1757-899X/330/1/012006 ↗
13. H.B. Baskey, E. Johari, and M.J. Akhtar, Metamaterial structure integrated with a dielectric absorber for wideband reduction of antennas radar cross section. IEEE Trans. Electromagn. Compat. 59, 1060 (2017).10.1109/TEMC.2016.2639060 ↗
14. V. Joy, A. Dileep, P.V. Abhilash, R.U. Nair, and H. Singh, Metasurfaces for stealth applications: a comprehensive review. J. Electron. Mater. 50, 3129 (2021).10.1007/s11664-021-08927-3 ↗
15. R. Kuekha, T.H. Mubarak, and B. Azhdar, Electromagnetic Interference shielding and characterization of Ni2+ substituted cobalt nanoferrites prepared by sol-gel auto combustion method. Adv. Mater. Sci. Eng. 2022, 1 (2022).10.1155/2022/3992402 ↗
16. I.S. Seo, W.S. Chin, and D.G. Lee, Characterization of electromagnetic properties of polymeric composite materials with free space method. Compos. Struct. 66, 533 (2004).10.1016/j.compstruct.2004.04.076 ↗
17. A. Delfini, M. Albano, A. Vricella, F. Santoni, G. Rubini, R. Pastore, and M. Marchetti, Advanced radar absorbing ceramic-based materials for multifunctional applications in space environment. Materials 11, 1730 (2018).10.3390/ma11091730 ↗
18. J. Kruželák, A. Kvasničáková, K. Hložeková, and I. Hudec, Progress in polymers and polymer composites used as efficient materials for EMI shielding. Nanoscale Adv. 3, 123 (2021).10.1039/D0NA00760A ↗
19. L. Omana, A. Chandran, R.E. John, R. Wilson, K.C. George, N.V. Unnikrishnan, S.S. Varghese, G. George, S.M. Simon, and I. Paul, Recent advances in polymer nanocomposites for electromagnetic interference shielding: a review. ACS Omega 7, 25921 (2022).10.1021/acsomega.2c02504 ↗
20. C. Pavlou, M.G. Pastore Carbone, A.C. Manikas, G. Trakakis, C. Koral, G. Papari, A. Andreone, and C. Galiotis, Effective EMI shielding behavior of thin graphene/PMMA nanolaminates in the THz range. Nat. Commun. 12, 4655 (2021).10.1038/s41467-021-24970-4 ↗
21. D. Micheli, R. Pastore, A. Vricella, R. B. Morles, and M. Marchetti, Synthesys of radar absorbing materials for stealth aircraft by using nanomaterials and evolutionary computation. 29th Congr. Int. Counc. Aeronaut. Sci. ICAS 2014 (2014).
22. F. Ruiz-Perez, S.M. López-Estrada, R.V. Tolentino-Hernández, and F. Caballero-Briones, Carbon-based radar absorbing materials: a critical review. J. Sci. Adv. Mater. Devices 7, 100454 (2022).10.1016/j.jsamd.2022.100454 ↗
23. M.B. Hossain, M.R.I. Faruque, M.T. Islam, M. Singh, and M. Jusoh, Triple band microwave metamaterial absorber based on double E-shaped symmetric split ring resonators for EMI shielding and stealth applications. J. Mater. Res. Technol. 18, 1653 (2022).10.1016/j.jmrt.2022.03.079 ↗
24. M. Rai and R. Kumar Yadav, Characterization of shielding effectiveness of general metallized structure. Int. J. Wirel. Microw. Technol. 4, 32 (2014).
25. Z. Ertekin, M. Secmen, and M. Erol, Electromagnetic shielding effectiveness and microwave properties of expanded graphite-ionic liquid co-doped PVDF. J. Mater. Sci. Mater. Electron. 34, 43 (2023).10.1007/s10854-022-09444-7 ↗
26. M. Rukhsar, Z. Ahmad, A. Rauf, H. Zeb, M. Ur-Rehman, and H.A. Hemeg, An overview of iron oxide (Fe3O4) nanoparticles: from synthetic strategies, characterization to antibacterial and anticancer applications. Crystals 12, 1809 (2022).10.3390/cryst12121809 ↗
27. Y. Feng, V.D. Kreslavski, A.N. Shmarev, A.A. Ivanov, S.K. Zharmukhamedov, A. Kosobryukhov, M. Yu, S.I. Allakhverdiev, and S. Shabala, Effects of Iron oxide nanoparticles (Fe3O4) on growth, photosynthesis, antioxidant activity and distribution of mineral elements in wheat (Triticum aestivum) Plants. Plants 11, 1894 (2022).10.3390/plants11141894 ↗
28. X. Zhou, C. Zhang, M. Zhang, A. Feng, S. Qu, Y. Zhang, X. Liu, Z. Jia, and G. Wu, Synthesis of Fe3O4/carbon foams composites with broadened bandwidth and excellent electromagnetic wave absorption performance. Compos. Part A Appl. Sci. Manuf. 127, 105627 (2019).10.1016/j.compositesa.2019.105627 ↗
29. X. Zeng, G. Jiang, L. Zhu, C. Wang, M. Chen, and R. Yu, Fe3O4 nanoflower-carbon nanotube composites for microwave shielding. ACS Appl. Nano Mater. 2, 5475 (2019).10.1021/acsanm.9b01076 ↗
30. X. Zhao, D. Xia, and K. Zheng, Fe3O4/Fe/carbon composite and its application as anode material for lithium-ion batteries. ACS Appl. Mater. Interfaces 4, 1350 (2012).10.1021/am201617j ↗
31. H. Sasabe, K. Sawamura, S. Saito, and K. Yoda, Effects of catalysts on dielectric properties and D. C. conduction in poly(ethylene terephthalate). Polym. J. 2, 518 (1971).10.1295/polymj.2.518 ↗
32. K. Yin, Z. Zhou, D.E. Schuele, M. Wolak, L. Zhu, and E. Baer, Effects of interphase modification and biaxial orientation on dielectric properties of poly(ethylene terephthalate)/poly(vinylidene fluoride-co-hexafluoropropylene) multilayer films. ACS Appl. Mater. Interfaces 8, 13555 (2016).10.1021/acsami.6b01287 ↗