journal article·2023-06

Synthesis of Mesoporous Rod-Like MnC2O4/MWCNT Composite Anode Material for Lithium-Ion Batteries

Fang-Fei Xing, Xin-Yi Huang, Yi-Xin He, Dan-Dan Zeng, Xiao-Pan Chen, Li-Xue Lu, Jing Su, Xiao-Yan Lv, Yun-Fei Long, Yan-Xuan Wen

Journal of Electronic Materials· Volume 52· Issue 6
Publisher page

Abstract

MnC2O4 is a promising anode material for Li-ion batteries. However, MnC2O4 suffers from poor performance due to its low conductivity and volume change in cycles. Herein, a strategy based on the surface charge and flexibility of multiwalled carbon nanotubes (MWCNT) was developed to improve the performance of MnC2O4, and a rod-like mesoporous MnC2O4/MWCNT composite was prepared via simple precipitation in water. The [Mn(H2O)n]2+–MWCNT complex was formed through electrostatic attraction between [Mn(H2O)n]2+ and the surface charge of MWCNT, which acted as the nucleation site of the manganese oxalate rod. The flexibility of the MWCNT allowed it to curl and twine in the rod and wrap over the surface of the rod. Introducing MWCNT created abundant mesopores and a three-dimensional conductive network. This prepared composite delivered capacity of 1004 mA h/g and 983 mA h/g after 600 cycles at 2 A/g and 5 A/g, respectively. As a comparison, the capacity of the MnC2O4 rod without MWCNT was only 345 mA h/g and 270 mA h/g under the same conditions. The excellent performance of the MnC2O4/MWCNT composite can be ascribed to the abundant mesoporous structure and 3D conductivity network created by MWCNT, which enhance the conductivity, accelerate electrode kinetics, and alleviate the volume change in cycles.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advancements in Battery Materials · Supercapacitor Materials and Fabrication · Advanced Battery Materials and Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. D. Larcher and J. Tarascon, Towards greener and more sustainable batteries for electrical energy storage. Nat. Chem. 7, 19 (2015).10.1038/nchem.2085 ↗
2. J. Duan, X. Tang, H. Dai, Y. Yang, W. Wu, X. Wei, and Y. Huang, Building safe lithium-ion batteries for electric vehicles: a review. Electrochem. Energy Rev. 3, 1 (2020).10.1007/s41918-019-00060-4 ↗
3. A. Tomaszewska, Z. Chu, X. Feng, S. O’Kane, X. Liu, J. Chen, C. Ji, E. Endler, R. Li, L. Liu, Y. Li, S. Zheng, S. Vetterlein, M. Gao, J. Du, M. Parkes, M. Ouyang, M. Marinescu, G. Offer, and B. Wu, Lithium-ion battery fast charging: a review. Transportation 1, 100011 (2019).
4. Y. Wu, E. Rahm, and R. Holze, Carbon anode materials for lithium ion batteries. J. Power Sources 114, 228 (2003).10.1016/S0378-7753(02)00596-7 ↗
5. V. Aravindan, Y. Lee, and S. Madhavi, Research progress on negative electrodes for practical li-ion batteries: beyond carbonaceous anodes. Adv. Energy Mater. 5, 1402225 (2015).10.1002/aenm.201402225 ↗
6. H. Cheng, J.G. Shapter, Y. Li, and G. Gao, Recent progress of advanced anode materials of lithium-ion batteries. J. Energy Chem. 57, 451 (2021).10.1016/j.jechem.2020.08.056 ↗
7. G. Gao, Q. Wang, L. Zhang, D. Cui, and Y. Yao, Metal oxalate-based anode materials: a new choice for energy storage materials applied in metal ion batteries. Prog. Chem. 34, 434 (2022).
8. Q. He, H. Wang, X. Zhao, and L. Chen, Recent advances of transition metal oxalate-based micro-and nanomaterials for electrochemical energy storage: a review. Mater. Today Chem. 22, 100564 (2021).10.1016/j.mtchem.2021.100564 ↗
9. K. Zhang, D. Zhang, Y. Li, L. Wang, F. Liang, Y. Dai, and Y. Yao, FeC2O4@Fe2O3/rGO composites with a novel interfacial characteristic and enhanced ultrastable lithium storage performance. Appl. Surf. Sci. 507, 145051 (2020).10.1016/j.apsusc.2019.145051 ↗
10. K. Zhang, Y. Li, Y. Wang, J. Zhao, X. Chen, Y. Dai, and Y. Yao, Enhanced electrochemical properties of iron oxalate with more stable li+ ions diffusion channels by controlling polymorphic structure. Chem. Eng. J. 384, 123281 (2020).10.1016/j.cej.2019.123281 ↗
11. Z. Qi, Y. Wu, X. Li, Y. Qu, Y. Yang, and D. Mei, Microwave-assisted synthesis of CuC2O4·xH2O for anode materials in lithium-ion batteries with a high capacity. Ionics 26, 33 (2020).10.1007/s11581-019-03181-4 ↗
12. K. Zhang, Y. Li, X. Hu, F. Liang, L. Wang, R. Xu, Y. Dai, and Y. Yao, Inhibitive role of crystal water on lithium storage for multilayer FeC2O4·xH2O anode materials. Chem. Eng. J. 404, 126464 (2021).10.1016/j.cej.2020.126464 ↗
13. K. Zhang, R. Xu, R. Wei, Y. Li, Y. Wang, Y. Zhang, Y. Dai, and Y. Yao, Tunable polymorph and morphology synthesis of iron oxalate nanoparticles as anode materials for lithium ion batteries. Mater. Chem. Phys. 243, 122676 (2020).10.1016/j.matchemphys.2020.122676 ↗
14. Y. Zhang, C. Wang, Y. Dong, R. Wei, and J. Zhang, Understanding the high-performance anode material of CoC2O4·2 H2O microrods wrapped by reduced graphene oxide for lithium-ion and sodium-ion batteries. Chemistry 27, 993 (2021).10.1002/chem.202003309 ↗
15. M.C. López, J.L. Tirado, and C. Pérez Vicente, Structural and comparative electrochemical study of M(II) oxalates, M = Mn, Fe Co, Ni, Cu, Zn. J. Power Sources 227, 65 (2013).10.1016/j.jpowsour.2012.08.100 ↗
16. Y. Zhang, Z. Lu, M. Guo, Z. Bai, and B. Tang, Porous CoC2O4 nanorods as high performance anode material for lithium ion batteries. JOM 68, 2952 (2016).10.1007/s11837-016-2126-4 ↗
17. W.A. Ang, N. Gupta, R. Prasanth, and S. Madhavi, High-performing mesoporous iron oxalate anodes for lithium-ion batteries. ACS Appl. Mater. Interfaces 4, 7011 (2012).10.1021/am3022653 ↗
18. W.A. Ang, Y.L. Cheah, C.L. Wong, R. Prasanth, H.H. Hng, and S. Madhavi, Mesoporous cobalt oxalate nanostructures as high-performance anode materials for lithium-ion batteries: ex situ electrochemical mechanistic study. J. Phys. Chem. C 117, 16316 (2013).10.1021/jp404049f ↗
19. Y. Yang, L. He, J. Lu, Z. Liu, N. Wang, J. Su, Y. Long, X. Lv, and Y. Wen, Rapid assemble of MnC2O4 microtubes using a microchannel reactor and their use as an anode material for lithium-ion batteries. Electrochim. Acta 321, 134673 (2019).10.1016/j.electacta.2019.134673 ↗
20. J. Park, J. Jo, H. Yashiro, S. Kim, S. Kim, Y. Sun, and S. Myung, Synthesis and electrochemical reaction of tin oxalate-reduced graphene oxide composite anode for rechargeable lithium batteries. ACS Appl. Mater. Interfaces 9, 25941 (2017).10.1021/acsami.7b03325 ↗
21. W. Zhu, K. Kierzek, S. Wang, S. Li, R. Holze, and X. Chen, Improved performance in lithium ion battery of CNT-Fe3O4@graphene induced by three-dimensional structured construction. Colloids Surf. A 612, 126014 (2021).10.1016/j.colsurfa.2020.126014 ↗
22. X. Liu, Z.D. Huang, S.W. Oh, B. Zhang, P. Ma, M.M.F. Yuen, and J. Kim, Carbon nanotube (CNT)-based composites as electrode material for rechargeable Li-ion batteries: a review. Compos. Sci. Technol. 72, 121 (2012).10.1016/j.compscitech.2011.11.019 ↗
23. K. Zhang, G. Gao, Y. Li, Y. Wang, R. Xu, Y. Dai, and Y. Yao, Ferrous-cupric oxalate hydrate combined with multiwalled carbon nanotubes composite anodes for lithium-ion batteries. Mater. Lett. 266, 127476 (2020).10.1016/j.matlet.2020.127476 ↗
24. X. Guo, Z. Sun, H. Ge, Q. Zhao, T. Shang, Y. Tian, and X. Song, MnOx bound on oxidized multi-walled carbon nanotubes as anode for lithium-ion batteries. Chem. Eng. J. 426, 131335 (2021).10.1016/j.cej.2021.131335 ↗
25. W. Wu, T. Tang, Y. Li, and S. Xu, Versatile oxalato-bridging modes: a novel three-dimensional framework structure of manganese(II) oxalate complex [MnC2O4]·0.5H2O and the relationship with other manganese(II) oxalates. Dalton Trans. 50, 485 (2021).10.1039/D0DT03765F ↗
26. S. Ruan, C. Ma, J. Wang, W. Qiao, and L. Ling, Facile synthesis of graphene-wrapped porous MnCO3 microspheres with enhanced surface capacitive effects for superior lithium storage. Chem. Eng. J. 367, 64 (2019).10.1016/j.cej.2019.01.157 ↗
27. S.P. Chenakin, S.A. Alekseev, and N. Kruse, X-ray photoelectron spectroscopy and diffuse reflectance infrared Fourier transform spectroscopy insight into the pathways of manganese oxalate thermal decomposition to MnO and MnCO3. Inorg. Chem. 61, 12106 (2022).10.1021/acs.inorgchem.2c00672 ↗
28. L. Ren, P. Wang, Y. Han, C. Hu, and B. Wei, Synthesis of CoC2O4·2H2O nanorods and their thermal decomposition to Co3O4 nanoparticles. Chem. Phys. Lett. 476, 78 (2009).10.1016/j.cplett.2009.06.015 ↗
29. D. Wang, Q. Wang, and T. Wang, Morphology-controllable synthesis of cobalt oxalates and their conversion to mesoporous Co3O4 nanostructures for application in supercapacitors. Inorg. Chem. 50, 6482 (2011).10.1021/ic200309t ↗
30. Z.P. Xu and H.C. Zeng, Control of surface area and porosity of Co3O4 via intercalation of oxidative or nonoxidative anions in hydrotalcite-like precursors. Chem. Mat. 12, 3459 (2000).10.1021/cm000371e ↗
31. Z. Wang, X. He, and D. Sun, Practical Infrared Spectroscopy, 2nd ed., (Beijingg: Petroleum Industry Press, 1990).
32. H.N. Hareesh, K.U. Minchitha, N. Nagaraju, and N. Kathyayini, Catalytic role of Cu(I) species in Cu2O/CuI supported on MWCNTs in the oxidative amidation of aryl aldehydes with 2-aminopyridines. Chin. J. Catal. 36, 1825 (2015).10.1016/S1872-2067(15)60964-0 ↗
33. C. Jo, J.H. Jo, J.U. Choi, H. Yashiro, H. Kim, and S. Myung, Oxalate-based high-capacity conversion anode for potassium storage. ACS Sustain. Chem. Eng. 8, 3743 (2020).10.1021/acssuschemeng.9b06951 ↗
34. Q. Zhang, Y. Hu, J. Wang, and F. Pan, CuCo2S4/CuS@MWCNTs composite as a cathode for rechargeable magnesium-ion batteries with long cycle life. J. Phys. Chem. C 125, 19673 (2021).10.1021/acs.jpcc.1c06493 ↗
35. Z. Ruiting, C. Guoan, Z. Yong, and L. Huaping, A comparative Raman study of carbon nanotubes allays. Spectrosc. Spectr. Anal. 26, 1071 (2006).
36. X. Pei, D. Mo, S. Lyu, J. Zhang, and Y. Fu, Synthesis of MnCO3/multiwalled carbon nanotube composite as anode material for lithium-ion batteries. J. Nanosci. Nanotechnol. 19, 5743 (2019).10.1166/jnn.2019.16564 ↗
37. Q. Li, G. Zhu, Y. Zhao, K. Pei, and R. Che, NixMnyCozO nanowire/CNT composite microspheres with 3d interconnected conductive network structure via spray-drying method: a high-capacity and long-cycle-life anode material for lithium-ion batteries. Small 15, 1900069 (2019).10.1002/smll.201900069 ↗
38. K. Zhang, F. Liang, Y. Wang, Y. Dai, and Y. Yao, Multilayer iron oxalate with a mesoporous nanostructure as a high-performance anode material for lithium-ion batteries. J. Alloys Compd. 779, 91 (2019).10.1016/j.jallcom.2018.11.011 ↗
39. W.A.E. Ang, Y.L. Cheah, C.L. Wong, H.H. Hng, and S. Madhavi, One-pot solvothermal synthesis of Co1−xMnxC2O4 and their application as anode materials for lithium-ion batteries. J. Alloys Compd. 638, 324 (2015).10.1016/j.jallcom.2015.02.203 ↗
40. Z. Ju, G. Ma, Y. Zhao, Z. Xing, Y. Qiang, and Y. Qian, A facile method for synthesis of porous NiCo2O4 nanorods as a high-performance anode material for li-ion batteries. Part. Part. Syst. Charact. 32, 1012 (2015).10.1002/ppsc.201500093 ↗
41. S. Zheng, J. Hu, L. Zhong, W. Song, L. Wan, and Y. Guo, Introducing dual functional CNT networks into CuO nanomicrospheres toward superior electrode materials for lithium-ion batteries. Chem. Mater. 20, 3617 (2008).10.1021/cm7033855 ↗
42. Y. Zhang, L. Xue, Y. Zhang, J. Su, Y. Long, X. Lü, and Y. Wen, Synthesis and electrochemical performance of mesoporous MnC2O4 nanorod/rGO composite anode for lithium-ion batteries. J. Mater. Sci. Mater. Electron. 32, 15069 (2021).10.1007/s10854-021-06059-2 ↗
43. M. Muttakin, S. Mitra, K. Thu, K. Ito, and B.B. Saha, Theoretical framework to evaluate minimum desorption temperature for IUPAC classified adsorption isotherms. Int. J. Heat Mass Transf. 122, 795 (2018).10.1016/j.ijheatmasstransfer.2018.01.107 ↗
44. J. Xu, L. He, H. Liu, T. Han, Y. Wang, C. Zhang, and Y. Zhang, Controlled synthesis of porous anhydrous cobalt oxalate nanorods with high reversible capacity and excellent cycling stability. Electrochim. Acta 170, 85 (2015).10.1016/j.electacta.2015.04.114 ↗
45. N. Li, Q. Li, X. Guo, M. Yuan, and H. Pang, Controllable synthesis of oxalate and oxalate-derived nanomaterials for applications in electrochemistry. Chem. Eng. J. 372, 551 (2019).10.1016/j.cej.2019.04.127 ↗
46. Z. Chen, J. Liu, C. Pu, X. Li, and Y. Bai, Surfactant-assisted multi-walled carbon nanotubes dispersion: Mechanism and properties evaluation. Fine Chem. 39, 269 (2022).
47. Y. Jia, A. Cheng, W. Ke, J. Liu, S. Wang, Y. Zhao, Q. Yang, and J. Zhang, Hierarchical structure constructed by manganese oxalate framework with accurate iron doping for ultra-efficient lithium storage. Electrochim. Acta 380, 138217 (2021).10.1016/j.electacta.2021.138217 ↗
48. A. Van der Ven, J. Bhattacharya, and A.A. Belak, Understanding li diffusion in li-intercalation compounds. Accounts Chem. Res. 46, 1216 (2013).10.1021/ar200329r ↗
49. J. Song, Y. Ji, Y. Li, R. Tong, Q. Tian, J. Chen, and Z. Chen, Porous carbon with carbon nanotube scaffold for embedding Cu2O/Cu nanoparticles towards high lithium storage. Chem. Phys. Lett. 780, 138934 (2021).10.1016/j.cplett.2021.138934 ↗
50. Z. Ma, R. Zheng, Y. Liu, Y. Ying, and W. Shi, Carbon nanotubes interpenetrating MOFs-derived Co-Ni-S composite spheres with interconnected architecture for high performance hybrid supercapacitor. J. Colloid Interface Sci. 602, 627 (2021).10.1016/j.jcis.2021.06.027 ↗
51. G. Fang, A hybrid Si@C@CNT@C anode by anchoring silicon nanoparticles onto CNT for enhancing performance in lithium ion battery. Int. J. Electrochem. Sci. 10, 1580 (2019).10.20964/2019.02.73 ↗
52. X. Wu, J. Guo, M.J. McDonald, S. Li, B. Xu, and Y. Yang, Synthesis and characterization of urchin-like Mn0.33Co0.67C2O4 for Li-ion batteries: role of SEI layers for enhanced electrochemical properties. Electrochim. Acta 163, 93 (2015).10.1016/j.electacta.2015.02.134 ↗
53. B. León, C.P. Vicente, and J.L. Tirado, New mixed transition metal oxysalts as negative electrode materials for lithium-ion batteries. Solid State Ion. 225, 518 (2012).10.1016/j.ssi.2011.12.012 ↗
54. P. Simon, Y. Gogotsi, and B. Dunn, Materials science. Where do batteries end and supercapacitors begin? Science 343, 1210 (2014).10.1126/science.1249625 ↗
55. G.A. Muller, J.B. Cook, H. Kim, S.H. Tolbert, and B. Dunn, High performance pseudocapacitor based on 2d layered metal chalcogenide nanocrystals. Nano Lett. 15, 1911 (2015).10.1021/nl504764m ↗
56. X. Pu, D. Zhao, C. Fu, Z. Chen, S. Cao, C. Wang, and Y. Cao, Understanding and calibration of charge storage mechanism in cyclic voltammetry curves. Angew. Chem. Int. Ed. 60, 21310 (2021).10.1002/anie.202104167 ↗
57. Z. Hu, Z. Zhu, F. Cheng, K. Zhang, J. Wang, C. Chen, and J. Chen, Pyrite FeS2 for high-rate and long-life rechargeable sodium batteries. Energy Environ. Sci. 8, 1309 (2015).10.1039/C4EE03759F ↗
58. T. Brezesinski, J. Wang, S.H. Tolbert, and B. Dunn, Ordered mesoporous α-MoO3 with iso-oriented nanocrystalline walls for thin-film pseudocapacitors. Nat. Mater. 9, 146 (2010).10.1038/nmat2612 ↗