journal article·2022-06Open access

Multiphysics Simulation of Seebeck Coefficient Measurement

K. Huang, F. Edler

Journal of Electronic Materials· Volume 51· Issue 6

Abstract

Abstract Using the finite element method (FEM), we developed a simulation model based on our actual apparatus, which is used for measuring the Seebeck coefficient and the electrical conductivity of thermoelectric materials. In terms of geometry, materials, and physics, our simulation model corresponds to the essential details of the experimental device. This article describes the model in detail and highlights key technical characteristics. By comparing it with actual measurement results, the accuracy of the model has been verified. Based on this accurate model, a simulation comparison study on the changes of certain parameters was carried out. Finally, the results of these comparisons are discussed to gain a deeper understanding of the actual experimental process and to improve the accuracy of the measurement.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Advanced Thermoelectric Materials and Devices · Thermal properties of materials · Advanced Thermodynamics and Statistical Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. Fraunhofer Institute for Physical Measurement Techniques, https://www.ipm.fraunhofer.de/.
2. F. Edler and K. Huang, Analysis of the “cold Finger Effect” in measuring the Seebeck coefficient. Meas. Sci. Technol. (2020). https://doi.org/10.1088/1361-6501/abb38b.10.1088/1361-6501/abb38b ↗
3. COMSOL Multiphysics®, V. 5.4. https://www.comsol.com/. COMSOL AB, Stockholm, Sweden.
4. M. Jaegle, Multiphysics simulation of thermoelectric systems - Modeling of peltier-cooling and thermoelectric generation, Multiphysics Simul. Thermoelectr. Syst. - Model. Peltier-Cooling Thermoelectr. Gener. 7 (2008).
5. T. Forrister, Studying the Peltier and Seebeck Effects in Thermoelectric Devices, https://www.comsol.com/blogs/studying-the-peltier-and-seebeck-effects-in-thermoelectric-devices.
6. K. Zabrocki, P. Ziolkowski, T. Dasgupta, J. De Boor, and E. Müller, Simulations for the development of thermoelectric measurements. J. Electron. Mater. 42, 2402 (2013).10.1007/s11664-013-2579-y ↗
7. J. Mackey, F. Dynys, and A. Sehirlioglu, Uncertainty analysis for common Seebeck and electrical resistivity measurement. Rev. Sci. Instrum. 85, 085119 (2014).10.1063/1.4893652 ↗
8. Heraeus, Physical Properties of Pt Materials and Pt DPH Material, n.d.
9. S. M. Deutschland, Inconel Alloy 600, https://www.specialmetals.com/ (n.d.).
10. K. Huang, F. Edler, S. Haupt, P. Ziolkowski, C. Stiewe, and E. Müller, Modelling and uncertainty analysis of Seebeck coefficient measurements by using the finite element method. Mater. Today Proc. 44, 3500 (2019).10.1016/j.matpr.2020.09.158 ↗
11. F. Nakama, A. T. Burkov, A. Heinrich, T. Oyoshi, and K. Yagasaki, Experimental set-up for thermopower and resistivity measurements at 100-1300 K, Int. Conf. Thermoelectr. ICT, Proc. 266 (1998).10.1109/ICT.1998.740369 ↗
12. O. Boffoú, A. Jacquot, A. Dauscher, B. Lenoir, and M. Stölzer, Experimental Setup for the measurement of the electrical resistivity and Thermopower of thin films and bulk materials. Rev. Sci. Instrum. 76, 053907 (2005).10.1063/1.1912820 ↗
13. F. Edler, E. Lenz, and S. Haupt, Reference material for Seebeck coefficients. Int. J. Thermophys. 36, 482 (2014).10.1007/s10765-014-1761-7 ↗
14. J. Martin, T. Tritt, and C. Uher, High temperature Seebeck coefficient metrology. J. Appl. Phys. 108, 14 (2010).
15. J. Martin, Protocols for the high temperature measurement of the Seebeck coefficient in thermoelectric materials. Meas. Sci. Technol. 24, 085601 (2013).10.1088/0957-0233/24/8/085601 ↗