Role of Cavitation in Necking-Driven Tertiary Stage of Power-Law Creep of Sn and Sn-Ag-Cu Solder Alloy: An Experiment-Inspired Modeling Approach
Source abstract
Abstract
This study investigates the effect of transgranular cavitation on the necking-dominated tertiary stage of power-law creep of Sn-3wt.Ag-0.5wtCu (SAC 305) alloy and compares it with pure Sn. Tensile creep tests revealed two stages of tertiary creep, wherein the strain rate increased gradually and then rapidly in the first and the second stages, respectively. The strain at the transition between the two stages was independent of stress in pure Sn and decreased with stress in the SAC alloy. The effect of stress on the increase in tertiary creep rate with strain was less in Sn than in SAC 305. Differences were observed in the failure modes, wherein Sn exhibited necking-dominated failure, and SAC 305 underwent cavitation along with necking. An analytical model that amalgamates the effects of cavitation on necking-dominated tertiary creep was developed to explain the experimental observations. The model predicted that the transition strain marks the onset of localization of creep strain in the neck due to either accelerated external area decrease or cavity growth, thereby providing a physical meaning to the two stages of tertiary creep. The model suggests that the initial cavity fraction, the applied stress and the creep stress exponent affect strain localization and the relative contribution of necking and cavitation to creep failure. © The Minerals, Metals & Materials Society 2025.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Metal Forming Simulation Techniques · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. F.P. McCluskey, M. Dash, Z. Wang, and D. Huff, Reliability of high temperature solder alternatives. Microelectron. Reliab. 46, 1910 (2006). https://doi.org/10.1016/j.microrel.2006.07.090.10.1016/j.microrel.2006.07.090 ↗
2. T. Chen, and I. Dutta, Effect of Ag and Cu concentrations on the creep behavior of Sn-based solders. J. Electron. Mater. 37, 347 (2008). https://doi.org/10.1007/s11664-007-0340-0.10.1007/s11664-007-0340-0 ↗
3. P. Kumar, Z. Huang, S.C. Chavali, D.K. Chan, I. Dutta, G. Subbarayan, and V. Gupta, Microstructurally adaptive model for primary and secondary creep of Sn-Ag-based solders. IEEE Trans. Compon. Packag. Manuf. Technol. 2, 256 (2012). https://doi.org/10.1109/TCPMT.2011.2173494.10.1109/TCPMT.2011.2173494 ↗
4. I. Dutta, A constitutive model for creep of lead-free solders undergoing strain-enhanced microstructural coarsening: a first report. J. Electron. Mater. 32, 201 (2003). https://doi.org/10.1007/s11664-003-0210-3.10.1007/s11664-003-0210-3 ↗
5. P.T. Vianco, J.A. Rejent, and A.C. Kilgo, Creep behavior of the ternary 95.5Sn-3.9Ag-0.6Cu solder: part II-aged condition. J. Electron. Mater. 33, 1473 (2004). https://doi.org/10.1007/s11664-004-0089-7.10.1007/s11664-004-0089-7 ↗
6. F. Ochoa, X. Deng, and N. Chawla, Effects of cooling rate on creep behavior of a Sn-3.5Ag alloy. J. Electron. Mater. 33, 1596 (2004). https://doi.org/10.1007/s11664-004-0103-0.10.1007/s11664-004-0103-0 ↗
7. R.S. Sidhu, X. Deng, and N. Chawla, Microstructure characterization and creep behavior of Pb-free Sn-rich solder alloys: part II. Creep behavior of bulk solder and solder/copper joints. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 39, 349 (2008). https://doi.org/10.1007/s11661-007-9412-2.10.1007/s11661-007-9412-2 ↗
8. M.A. Burke and W.D. Nix, Plastic instabilities in tension creep. Acta Metall. 23, 793 (1975). https://doi.org/10.1016/0001-6160(75)90195-9.10.1016/0001-6160(75)90195-9 ↗
9. M.F. Ashby and B.F. Dyson (1984) Creep Damage Mechanics and Micromechanisms, vol. 1 pp. 3–30. https://doi.org/10.1016/B978-1-4832-8440-8.50017-X.10.1016/B978-1-4832-8440-8.50017-X ↗
10. M.F. Ashby, C. Gandhi, and D.M.R. Taplin, Fracture-mechanism maps and their construction for F.C.C. Met. Alloy. Perspect. Creep Fract. 27, 1 (1983). https://doi.org/10.1016/b978-0-08-030541-7.50005-9.10.1016/b978-0-08-030541-7.50005-9 ↗
11. J.W. Hutchinson and K.W. Neale, Influence of strain-rate sensitivity on necking under uniaxial tension. Acta Metall. 25, 839 (1977). https://doi.org/10.1016/0001-6160(77)90168-7.10.1016/0001-6160(77)90168-7 ↗
12. D.K. Joo, J. Yu, and S.W. Shin, Creep rupture of lead-free Sn-3.5Ag-Cu solders. J. Electron. Mater. 32, 541 (2003). https://doi.org/10.1007/s11664-003-0140-0.10.1007/s11664-003-0140-0 ↗
13. C.K. Lin and D.Y. Chu, Creep rupture of lead-free Sn-3.5Ag and Sn-3.5Ag-0.5Cu solders. J. Mater. Sci. Mater. Electron. 16, 355 (2005). https://doi.org/10.1007/s10854-005-1147-5.10.1007/s10854-005-1147-5 ↗
14. V.I. Igoshev, J.I. Kleiman, D. Shangguan, S. Wong, and U. Michon, Fracture of Sn-3.5%Ag solder alloy under creep. J. Electron. Mater. 29, 1356 (2000). https://doi.org/10.1007/s11664-000-0119-z.10.1007/s11664-000-0119-z ↗
15. F. Sui and R. Sandström, Basic modelling of tertiary creep of copper. J. Mater. Sci. 53, 6850 (2018). https://doi.org/10.1007/s10853-017-1968-7.10.1007/s10853-017-1968-7 ↗
16. A.C.F. Cocks and M.F. Ashby, On creep fracture by void growth. Prog. Mater. Sci. 27, 189 (1982). https://doi.org/10.1016/0079-6425(82)90001-9.10.1016/0079-6425(82)90001-9 ↗
17. B.F. Dyson and M. McLean, Particle-coarsening, σ0 and tertiary creep. Acta Metall. 31, 17 (1983). https://doi.org/10.1016/0001-6160(83)90059-7.10.1016/0001-6160(83)90059-7 ↗
18. D. Hull and D.E. Rimmer, The growth of grain-boundary voids under stress. Phil. Mag. 4, 673 (1959). https://doi.org/10.1080/14786435908243264.10.1080/14786435908243264 ↗
19. L.C. Lim, Cavity nucleation at high temperatures involving pile-ups of grain boundary dislocations. Acta Metall. 35, 1663 (1987). https://doi.org/10.1016/0001-6160(87)90114-3.10.1016/0001-6160(87)90114-3 ↗
20. A.J. Levy, The tertiary creep and necking of creep damaging solids. Acta Metall. 34, 1991 (1986). https://doi.org/10.1016/0001-6160(86)90258-0.10.1016/0001-6160(86)90258-0 ↗
21. V. Tvergaard, Creep failure by degradation of the microstructure and grain boundary cavitation in a tensile test. Acta Metall. 35, 923 (1987). https://doi.org/10.1016/0001-6160(87)90171-4.10.1016/0001-6160(87)90171-4 ↗
22. J.R. Rice and D.M. Tracey, On the ductile enlargement of voids in triaxial stress fields. J. Mech. Phys. Solids 17, 201 (1969). https://doi.org/10.1016/0022-5096(69)90033-7.10.1016/0022-5096(69)90033-7 ↗
23. A. Kanjilal, V. Jangid, and P. Kumar, Critical evaluation of creep behavior of Sn-Ag-Cu solder alloys over wide range of temperatures. Mater. Sci. Eng. A 703, 144 (2017). https://doi.org/10.1016/j.msea.2017.07.061.10.1016/j.msea.2017.07.061 ↗
24. M.D. Mathew, H. Yang, S. Movva, and K.L. Murty, Creep deformation characteristics of tin and tin-based electronic solder alloys. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 36, 99 (2005). https://doi.org/10.1007/s11661-005-0142-z.10.1007/s11661-005-0142-z ↗
25. S. Chavali, S.S. Ganti, H. Liao, G. Subbarayan, I. Dutta, and M. Dayananda, Stereological analysis of microstructural evolution due to aging in SnAgCu solder alloys. J. Electron. Mater. 53, 1399 (2024). https://doi.org/10.1007/S11664-023-10885-X/TABLES/4.10.1007/S11664-023-10885-X/TABLES/4 ↗
26. A. Kanjilal and P. Kumar, Insights into growth behavior of intermetallic compounds in Sn-Ag-Cu solder joints during mechanical and thermo-mechanical deformation processes, in:2019 IEEE 21st Electronics Packaging Technology Conference, EPTC 2019 (2019) pp. 48–52. https://doi.org/10.1109/EPTC47984.2019.902661110.1109/EPTC47984.2019.9026611 ↗
27. A. Kanjilal, effect of length scale on high temperature mechanical behavior of Sn-Cu joints: a mechanics and material science based treatment, IISC Bangalore (2022). https://etd.iisc.ac.in/handle/2005/5755.
28. T. Gu, C.M. Gourlay, and T. Ben Britton, The role of lengthscale in the creep of Sn-3Ag-0.5Cu solder microstructures. J. Electron. Mater. 50, 926 (2021). https://doi.org/10.1007/S11664-020-08697-4/FIGURES/8.10.1007/S11664-020-08697-4/FIGURES/8 ↗
29. T. Gu, C.M. Gourlay, and T. Ben Britton, Evaluating creep deformation in controlled microstructures of Sn-3Ag-0.5Cu solder. J. Electron. Mater. 48, 107 (2019). https://doi.org/10.1007/S11664-018-6744-1/METRICS.10.1007/S11664-018-6744-1/METRICS ↗
30. A.C.F. Cocks and M.F. Ashby, Intergranular fracture during power-law creep under multiaxial stresses, metal. Science 14, 395 (1980). https://doi.org/10.1179/030634580790441187.10.1179/030634580790441187 ↗
31. P.W. Bridgman, The effect of nonuniformities of stress at the neck of a tension specimen, Studies in large plastic flow and fracture, Metallurgy and Metallurgical Engineering Series, 1st Edition (New York: McGraw-Hill Book Company Inc, 1952), pp. 9–37.
32. B.F. Dyson, Continuous cavity nucleation and creep fracture. Scr. Metall. 17, 31 (1983). https://doi.org/10.1016/0036-9748(83)90065-0.10.1016/0036-9748(83)90065-0 ↗
33. G.H. Edward and M.F. Ashby, Intergranular fracture during power-law creep. Acta Metall. 27, 1505 (1979). https://doi.org/10.1016/0001-6160(79)90173-1.10.1016/0001-6160(79)90173-1 ↗
34. J.B. Martin, A displacement bound technique for elastic continua subjected to a certain class of dynamic loading. J. Mech. Phys. Solids 12, 165 (1964). https://doi.org/10.1016/0022-5096(64)90016-X.10.1016/0022-5096(64)90016-X ↗
35. N.G. Needham and T. Gladman, Nucleation and growth of creep cavities in a type 347 steel, Metal. Science 14, 64 (1980). https://doi.org/10.1179/030634580790426300.10.1179/030634580790426300 ↗
36. A. Kanjilal, R.P. Narayanan, and P. Kumar, Size dependent creep deformation of elastically constrained compliant metallic joints. Materialia (Oxf) 21, 101322 (2022). https://doi.org/10.1016/j.mtla.2022.101322.10.1016/j.mtla.2022.101322 ↗
37. A. Kanjilal, P.R. Narayanan, M. Agilan, and P. Kumar, Effect of joint size on creep behavior of Sn-Ag-Cu solder-Cu joints. J. Electron. Mater. 52, 739 (2023). https://doi.org/10.1007/s11664-022-10065-3.10.1007/s11664-022-10065-3 ↗
38. M. Kerr and N. Chawla, Creep deformation behavior of Sn-3.5Ag solder/Cu couple at small length scales. Acta Mater. 52, 4527 (2004). https://doi.org/10.1016/j.actamat.2004.06.010.10.1016/j.actamat.2004.06.010 ↗
39. B.F. Dyson and T.B. Gibbons, Tertiary creep in nickel-base superalloys: analysis of experimental data and theoretical synthesis. Acta Metall. 35, 2355 (1987). https://doi.org/10.1016/0001-6160(87)90083-6.10.1016/0001-6160(87)90083-6 ↗
40. P. Prakash, J. Vanaja, G.V.P. Reddy, K. Laha, and G.V.S.N. Rao, On the effect of thermo-mechanical treatment on creep deformation and rupture behaviour of a reduced activation ferritic-martensitic steel. J. Nucl. Mater. 520, 65 (2019). https://doi.org/10.1016/j.jnucmat.2019.04.014.10.1016/j.jnucmat.2019.04.014 ↗
41. K.S. Chandravathi, K. Laha, C.S. Sasmal, P. Parameswaran, M. Nandagopal, H.M. Tailor, M.D. Mathew, T. Jayakumar, and E. Rajendra Kumar, Response of phase transformation inducing heat treatments on microstructure and mechanical properties of reduced activation ferritic-martensitic steels of varying tungsten contents. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 45, 4280 (2014). https://doi.org/10.1007/s11661-014-2406-y.10.1007/s11661-014-2406-y ↗
42. M.E. Kassner and T.A. Hayes, Creep cavitation in metals. Int. J. Plast. 19, 1715 (2003). https://doi.org/10.1016/S0749-6419(02)00111-0.10.1016/S0749-6419(02)00111-0 ↗
43. J. He and R. Sandström, Formation of creep cavities in austenitic stainless steels. J. Mater. Sci. 51, 6674 (2016). https://doi.org/10.1007/s10853-016-9954-z.10.1007/s10853-016-9954-z ↗
44. R. Wu and R. Sandström, Creep cavity nucleation and growth in 12Cr–Mo–V steel. Mater. Sci. Technol. (U.K.) 11, 579 (1995). https://doi.org/10.1179/mst.1995.11.6.579.10.1179/mst.1995.11.6.579 ↗
45. I.S. Servi and N.J. Grant, Creep and stress rupture behavior of aluminum as a function of purity. Jom 3, 909 (1951). https://doi.org/10.1007/bf03397400.10.1007/bf03397400 ↗
46. D.C. Dunand, B.Q. Han, and A.M. Jansen, Monkman-grant analysis of creep fracture in dispersion-strengthened and particulate-reinforced aluminum. Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 30, 829 (1999). https://doi.org/10.1007/s11661-999-0076-y.10.1007/s11661-999-0076-y ↗
47. R. Darveaux, K. Banerji, Constitutive relations for tin-based solder joints, (1992).10.1109/33.206925 ↗