Investigation of Filament Formation and Surface Perturbation in Nanoscale-Y2O3 Memristor: A Physical Modeling Approach
Bibliographic record
Abstract
No abstract is available for this record. The assistant can identify its topic from the title, but cannot infer the study’s results.
Source: Not provided · Quality: missing
Research context
OpenAlex topics: Advanced Memory and Neural Computing · Neuroscience and Neural Engineering · Semiconductor materials and devices
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Y. Nam, I. Hwang, S. Oh, S. Lee, K. Lee, S. Hong, J. Kim, T. Choi, and H.B. Park, Switchable Schottky diode characteristics induced by electroforming process in Mn-doped ZnO thin films. Appl. Phys. Lett. 102(16), 1621051 (2013).10.1063/1.4803088 ↗
2. G. Ding, S.T. Han, C.C. Kuo, A.L.V. Roy, and Y. Zhou, Porphyrin-based metal-organic frameworks for neuromorphic electronics. Small Struct. 4(2), 1 (2023).10.1002/sstr.202200150 ↗
3. L. Gao, Q. Ren, J. Sun, S.T. Han, and Y. Zhou, Memristor modeling: challenges in theories, simulations, and device variability. J. Mater. Chem. C 9, 16859 (2021).10.1039/D1TC04201G ↗
4. G. Pedretti and D. Ielmini, In-memory computing with resistive memory circuits: status and outlook. Electronics 10(9), 1063 (2021).10.3390/electronics10091063 ↗
5. H. Akinaga and H. Shima, Resistive random-access memory (ReRAM) based on metal oxides. Proc. IEEE 98(12), 2237 (2010).10.1109/JPROC.2010.2070830 ↗
6. S.H. Lee, X. Zhu, and W.D. Lu, Nanoscale resistive switching devices for memory and computing applications. Nano Res. 13, 1228 (2020).10.1007/s12274-020-2616-0 ↗
7. S. Kumar, M. Das, M.T. Htay, S. Sriram, and S. Mukherjee, Electroforming-free Y2O3 memristive crossbar array with low variability. ACS Appl. Electron. Mater. 4(6), 3080 (2022).10.1021/acsaelm.2c00472 ↗
8. S. Kumar, A. Agarwal, and S. Mukherjee, Electrical performance of large-area Y2O3 memristive crossbar array with ultralow C2C variability. IEEE Trans. Electron Devices 69(7), 3660 (2022).10.1109/TED.2022.3172400 ↗
9. S. Kumar, D.D. Kumbhar, J.H. Park, R.K. Kamat, T.D. Dongale, and S. Mukherjee, Y2O3-based crossbar array for analog and neuromorphic computation. IEEE Trans. Electron Devices 70(2), 473 (2022).10.1109/TED.2022.3227890 ↗
10. S. Kumar, M.K. Gautam, G.S. Gill, and S. Mukherjee, 3-D physical electro-thermal modeling of nanoscale Y2O3 memristors for synaptic application. IEEE Trans. Electron Devices 69(6), 3124 (2022).10.1109/TED.2022.3166858 ↗
11. S. Kim, S.J. Kim, K.M. Kim, S.R. Lee, M. Chang, E. Cho, Y.B. Kim, C.J. Kim, U.I. Chung, and I.K. Yoo, Physical electro-thermal model of resistive switching in bi-layered resistance-change memory. Sci. Rep. 3(1680), 1 (2013).
12. M. Bocquet, D. Deleruyelle, H. Aziza, C. Muller, J.M. Portal, T. Cabout, and E. Jalaguier, Robust compact model for bipolar oxide-based resistive switching memories. IEEE Trans. Electron Devices 61(3), 674 (2014).10.1109/TED.2013.2296793 ↗
13. B. Traore, P. Blaise, E. Vianello, L. Perniola, B.D. Salvo, and Y. Nishi, HfO2-based RRAM: Electrode effects, Ti/HfO2 interface, charge injection, and oxygen (O) defects diffusion through experiment and ab initio calculations. IEEE Trans. Electron Devices 63(1), 360 (2016).10.1109/TED.2015.2503145 ↗
14. V.G. Karpov, D. Niraula, and I.V. Karpov, Thermodynamic analysis of conductive filament. Appl. Phys. Lett. 109(9), 093501–1 (2016).10.1063/1.4962136 ↗
15. V.G. Karpov, D. Niraula, I.V. Karpov, and R. Kotlyar, Thermodynamics of phase transitions and bipolar filamentary switching in resistive random-access memory. Phys. Rev. Appl. 8(2), 024028–1 (2017).10.1103/PhysRevApplied.8.024028 ↗
16. C. Baeumer, R. Valenta, C. Schmitz, A. Locatelli, T.O. Mentes, S.P. Rogers, A. Sala, N. Raab, S. Nemsak, M. Shim, C.M. Schneider, S. Menzel, R. Waser, and R. Dittmann, Subfilamentary networks cause cycle-to-cycle variability in memristive devices. ACS Nano 11(7), 6921 (2017).10.1021/acsnano.7b02113 ↗
17. M.K. Gautam, S. Kumar, S. Chaudhary, L.K. Hindoliya, D.D. Kumbhar, J.H. Park, M.T. Htay, and S. Mukherjee, Experimental validation of switching dependence of nanoscale-Y2O3 memristor on electrode symmetry via physical electro-thermal modeling. ACS Appl. Electron. Mater. 5(7), 3885 (2023).10.1021/acsaelm.3c00598 ↗
18. D. Niraula and V. Karpov, Numerical modeling of resistive switching in RRAM device. Proceedings of the 2017 COMSOL Conference in Boston (COMSOL Inc., 2017) (2017), p. 1-7. https://www.comsol.com/paper/download/437382
19. D. Niraula and V. Karpov, Comprehensive numerical modeling of filamentary RRAM devices including voltage ramp-rate and cycle-to-cycle variations. J. Appl. Phys. 124(17), 174502–1 (2018).10.1063/1.5042789 ↗
20. G.R. Haripriya, H.Y. Noh, C.K. Lee, J.S. Kim, M.J. Lee, and H.J. Lee, Interface roughness effects and relaxation dynamics of an amorphous semiconductor oxide-based analog resistance switching memory. Nanoscale 15, 14476 (2023).10.1039/D3NR02591H ↗
21. H.D. Kim, M.J. Yun, S.M. Hong, J.H. Park, D.S. Jeon, and T.G. Kim, Impact of roughness of bottom electrodes on the resistive switching properties of platinum/nickel nitride/nickel 1 × 1 crossbar array resistive random access memory cells. Microelectron. Eng. 126, 169 (2014).10.1016/j.mee.2014.07.018 ↗
22. J. Molina, R. Valderrama, C. Zuniga, P. Rosales, W. Calleja, A. Torres, J.D. Hidalga, and E. Gutierrez, Influence of the surface roughness of the bottom electrode on the resistive-switching characteristics of Al/Al2O3/Al and Al/Al2O3/W structures fabricated on glass at 300°C. Microelectron. Reliab. 54, 2747 (2014).10.1016/j.microrel.2014.07.006 ↗