Study on Electromigration Mechanism of Lead-Free Sn3.5Ag0.5Bi8.0In Solder Joints
Source abstract
Abstract
The electromigration mechanism of linear Cu/Sn3.5Ag0.5Bi8.0In/Cu and Cu/Sn3.0Ag0.5Cu/Cu solder joints has been systematically studied. The crystal orientation and hardness of the solder joints, the composition analysis of them, and the microstructure evolution of the interfacial intermetallic compound (IMC) during the electromigration process have been studied. The “crossing orientation” in reflowed Cu/Sn3.5Ag0.5Bi8.0In/Cu solder joints was found and defined. A large amount of the In component reduced the undercooling of the solder joints. The latent heat released by the growth of Sn grains cannot provide enough energy to melt these grains grown at other nucleation sites. The grain orientations of Sn were dominated by twins, and there were also some small grain orientations formed by nucleation sites that were not melted by the latent heat. This was expressed as “crossing orientation”. In addition, the hardness of the Sn3.5Ag0.5Bi8.0In solder joints was isotropic and about 22 HV, which was higher than that of Cu/Sn3.0Ag0.5Cu/Cu solder joints from 10 HV to 16 HV. After electromigration, the intermetallic compound (IMC) layer growth rate of the Cu/Sn3.5Ag0.5Bi8.0In/Cu linear solder interface is slower than that of Cu/Sn3.0Ag0.5Cu/Cu linear solder. The growth formulas of the IMCs have been derived by Fick`s second law at the Cu/Sn3.5Ag0.5Bi8.0In/Cu solder joints. Under current stress, the preferential dissolution of Cu6Sn5 at the grain boundary and the consumption rate of the Cu plate increased rapidly, leading to the cathode dissolution phenomenon.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. T. Tian, K. Chen, A.A. MacDowell, D. Parkinson, Y.-S. Lai, and K.N. Tu, Quantitative X-ray microtomography study of 3-D void growth induced by electromigration in eutectic snpb flip-chip solder joints. Scr. Mater. 65, 646–649 (2011).10.1016/j.scriptamat.2011.07.002 ↗
2. N. Saunders and A.P. Miodownik, The Cu-Sn (copper-tin) system. Bull. Alloy Phase Diagr. 11, 278–287 (1990).10.1007/BF03029299 ↗
3. B. Chao, S.-H. Chae, X. Zhang, K.-H. Lu, M. Ding, J. Im, and P.S. Ho, Electromigration enhanced intermetallic growth and void formation in Pb-free solder joints. J. Appl. Phys. 100, 084909 (2006).10.1063/1.2359135 ↗
4. C.M. Tsai, Y.L. Lin, J.Y. Tsai, Y.-S. Lai, and C.R. Kao, Local melting induced by electromigration in flip-chip solder joints. J. Electron. Mater. 35, 1005–1009 (2006).10.1007/BF02692560 ↗
5. Y.H. Lin, Y.C. Hu, C.M. Tsai, C.R. Kao, and K.N. Tu, In situ observation of the void formation-and-propagation mechanism in solder joints under current-stressing. Acta Mater. 53, 2029–2035 (2005).10.1016/j.actamat.2005.01.014 ↗
6. K.N. Tu, Recent advances on electromigration in very-large-scale-integration of interconnects. J. Appl. Phys. 94, 5451–5473 (2003).10.1063/1.1611263 ↗
7. Y.C. Hu, Y.H. Lin, C.R. Kao, and K.N. Tu, Electromigration failure in flip chip solder joints due to rapid dissolution of copper. J. Mater. Res. 18, 2544–2548 (2003).10.1557/JMR.2003.0355 ↗
8. E.C.C. Yeh, W.J. Choi, K.N. Tu, P. Elenius, and H. Balkan, Current-crowding-induced electromigration failure in flip chip solder joints. Appl. Phys. Lett. 80, 580–582 (2002).10.1063/1.1432443 ↗
9. F.H. Huang and H.B. Huntingt, Diffusion of Sb124, Cd109, Sn113, and Zn65 in Tin. Phys. Rev. B 9, 1479–1488 (1974).10.1103/PhysRevB.9.1479 ↗
10. D.C. Yeh and H.B. Huntington, Extreme fast-diffusion system—nickel in single-crystal tin. Phys. Rev. Lett. 53, 1469–1472 (1984).10.1103/PhysRevLett.53.1469 ↗
11. M. Lu, D.-Y. Shih, P. Lauro, C. Goldsmith, and D.W. Henderson, Effect of Sn grain orientation on electromigration degradation mechanism in high Sn-based Pb-free solders. Appl. Phys. Lett. 92, 211909 (2008).10.1063/1.2936996 ↗
12. K. Lee, K.-S. Kim, Y. Tsukada, K. Suganuma, K. Yamanaka, S. Kuritani, and M. Ueshima, Influence of crystallographic orientation of Sn-Ag-Cu on electromigration in flip-chip joint. Microelectron. Reliab. 51, 2290–2297 (2011).10.1016/j.microrel.2011.05.003 ↗
13. J.H. Ke, T.L. Yang, Y.S. Lai, and C.R. Kao, Analysis and experimental verification of the competing degradation mechanisms for solder joints under electron current stressing. Acta Mater. 59, 2462–2468 (2011).10.1016/j.actamat.2010.12.048 ↗
14. M.B. Kelly, A. Antoniswamy, R. Mahajan, and N. Chawla, Effect of trace addition of in on Sn-Cu solder joint microstructure under electromigration. J. Electron. Mater. 50, 893–902 (2020).10.1007/s11664-020-08602-z ↗
15. Y. Wang, Y. Wang, J. Han, S. Tan, and F. Guo, Effects of Sn grain c-axis on electromigration in Cu reinforced composite solder joints. J. Mater. Sci.-Mater. Electron. 29, 5954–5960 (2018).10.1007/s10854-018-8568-4 ↗
16. J. Shi and H.B. Huntington, Electromigration of gold and silver in single-crystal tin. J. Phys. Chem. Solids 48, 693–696 (1987).10.1016/0022-3697(87)90060-6 ↗
17. H. Gan and K.N. Tu, Polarity effect of electromigration on kinetics of intermetallic compound formation in Pb-free solder V-groove samples. J. Appl. Phys. 97, 063514 (2005).10.1063/1.1861151 ↗
18. M.L. Huang, J.F. Zhao, Z.J. Zhang, and N. Zhao, Role of diffusion anisotropy in beta-Sn in microstructural evolution of Sn-3.0Ag-0.5Cu flip chip bumps undergoing electromigration. Acta Mater. 100, 98–106 (2015).10.1016/j.actamat.2015.08.037 ↗
19. W.-L. Chen, C.-Y. Yu, C.-Y. Ho, and J.-G. Duh, Effects of thermal annealing in the post-reflow process on microstructure, tin crystallography, and impact reliability of Sn-Ag-Cu solder joints. Mater. Sci. Eng A 613, 193–200 (2014).10.1016/j.msea.2014.06.102 ↗
20. B.-I. Noh, J.-H. Choi, J.-W. Yoon, and S.-B. Jung, Effects of cerium content on wettability, microstructure and mechanical properties of Sn-Ag-Ce solder alloys. J. Alloy. Compd. 499, 154–159 (2010).10.1016/j.jallcom.2010.03.179 ↗
21. F.X. Che, W.H. Zhu, E.S.W. Poh, X.W. Zhang, and X.R. Zhang, The study of mechanical properties of Sn-Ag-Cu lead-free solders with different Ag contents and Ni doping under different strain rates and temperatures. J. Alloy. Compd. 507, 215–224 (2010).10.1016/j.jallcom.2010.07.160 ↗
22. B. Gao, X. Meng, E. Guo, H. Liang, Z. Cao, and T. Wang, Effects of Ni on the nucleation and growth behavior of Cu6Sn5 in Sn-8.5Cu Alloy: an in situ observation. J. Alloys .Compd 862, 158603 (2021).10.1016/j.jallcom.2021.158603 ↗
23. W. Zhu, W. Zhang, W. Zhou, and P. Wu, Improved microstructure and mechanical properties for SnBi solder alloy by addition of Cr powders. J. Alloy. Compd. 789, 805–813 (2019).10.1016/j.jallcom.2019.03.027 ↗
24. W. Huang, K. Pan, J. Zhang, and Y. Gong, Effect of in-doping on mechanical properties of Cu6Sn5-based intermetallic compounds: a first-principles study. J. Electron. Mater. 50, 4164–4171 (2021).
25. P. Šebo, Z. Moser, P. ŠVec, D. JaničKovič, E. DobročKa, W. Gasior, and J. Pstruś, Effect of indium on the microstructure of the interface between Sn3.13Ag07.4CuIn solder and Cu substrate. J. Alloys Compd. 480, 409–415 (2009).10.1016/j.jallcom.2009.02.110 ↗
26. A. Sharif and Y.C. Chan, Effect of indium addition in Sn-rich solder on the dissolution of Cu metallization. J. Alloy. Compd. 390, 67–73 (2005).10.1016/j.jallcom.2004.08.023 ↗
27. J. Han and F. Guo, Nucleation and electromigration-induced grain rotation in an SABI333 solder joint. J. Mater. Sci. 53, 6230–6238 (2018).10.1007/s10853-017-1969-6 ↗
28. P. Li, J. Han, Y. Wang, F. Guo, L. Ma, and Y. Wang, Microstructure and intermetallic compounds in Sn-3Ag-3Bi-3In solder joints on Cu matrix, in: 2017 18th International Conference on Electronic Packaging Technology (ICEPT), IEEE, 2017, pp. 655–659.10.1109/ICEPT.2017.8046537 ↗
29. Z. Mei and J.W. Morris, Superplastic creep of low melting point solder joints. J. Electron. Mater. 21, 401–407 (1992).10.1007/BF02660403 ↗
30. R. Dudek, R. Döring, and B. Michel, Reliability prediction of area array solder joints. J. Electron. Packag. 125, 562–568 (2003).10.1115/1.1604802 ↗
31. A.U. Telang and T.R. Bieler, Characterization of microstructure and crystal orientation of the tin phase in single shear lap Sn–3.5Ag solder joint specimens. Scr. Mater. 52, 1027–1031 (2005).10.1016/j.scriptamat.2005.01.043 ↗
32. L. Lehman, S. Athavale, T. Fullem, A. Giamis, R. Kinyanjui, M. Lowenstein, K. Mather, R. Patel, D. Rae, and J. Wang, Growth of Sn and intermetallic compounds in Sn-Ag-Cu solder. J. Electron. Mater. 33, 1429–1439 (2004).10.1007/s11664-004-0083-0 ↗
33. L.P. Lehman, Y. Xing, T.R. Bieler, and E.J. Cotts, Cyclic twin nucleation in tin-based solder alloys. Acta Mater. 58, 3546–3556 (2010).10.1016/j.actamat.2010.01.030 ↗
34. J. Han and F. Guo, Double tricrystal nucleation behavior in Pb-Free BGA solder joints. Microelectron. Reliab. 98, 1–9 (2019).10.1016/j.microrel.2019.04.021 ↗
35. T.H. Chuang, K.W. Huang, and W.H. Lin, Mechanisms for the intermetallic formation during the Sn-20In-2.8Ag/Ni soldering reactions. J. Electron. Mater. 33, 374–381 (2004).10.1007/s11664-004-0146-2 ↗
36. H. Ma, L. Qu, M. Huang, L. Gu, N. Zhao, and L. Wang, In-situ study on growth behavior of Ag3Sn in Sn-3.5 Ag/Cu soldering reaction by synchrotron radiation real-time imaging technology. J. Alloys Compd. 537, 286–290 (2012).10.1016/j.jallcom.2012.05.055 ↗
37. O. Sahin, O. Uzun, U. Kolemen, and N. Ucar, Vickers microindentation hardness studies of β-Sn single crystals. Mater. Charact. 58, 197–204 (2007).10.1016/j.matchar.2006.04.023 ↗
38. J. Villain, U. Corradi, C. Weippert, S. Klima, M. Meeh, and S. Golling, Determination of mechanical properties of differently oriented beta-tin crystals in small solder joints and small tensile specimens using EBSD and nano hardness measurements, IEEE, New York, (2007).10.1109/EPTC.2007.4469753 ↗
39. K.N. Tu, Solder joint technology: materials, properties, and reliability, Vol. 117 (Berlin: Springer, 2010).
40. A. Paul, T. Laurila, V. Vuorinen, and S.V. Divinski, Thermodynamics, diffusion and the Kirkendall effect in solids || reactive phase formation in thin films, pp. 493–528 (2014) . https://doi.org/10.1007/978-3-319-07461-0.10.1007/978-3-319-07461-0 ↗
41. D. Ma, W.D. Wang, and S.K. Lahiri, Scallop formation and dissolution of Cu-Sn intermetallic compound during solder reflow. J. Appl. Phys. 91, 3312–3317 (2002).10.1063/1.1445283 ↗
42. A. Paul, The Kirkendall effect in solid state diffusion, Technische Universiteit Eindhoven, (2004).
43. I.A. Blech and C. Herring, Stress generation by electromigration. Appl. Phys. Lett. 29, 131–133 (1976).10.1063/1.89024 ↗
44. K.N. Tu, Electromigration in stressed thin films. Phys. Rev. B 45, 1409 (1992).10.1103/PhysRevB.45.1409 ↗
45. J.H. Ke, H.Y. Chuang, W.L. Shih, and C.R. Kao, Mechanism for serrated cathode dissolution in Cu/Sn/Cu interconnect under electron current stressing. Acta Mater. 60, 2082–2090 (2012).10.1016/j.actamat.2011.12.021 ↗
46. J.O. Suh, K.N. Tu, G.V. Lutsenko, and A.M. Gusak, Size distribution and morphology of Cu6Sn5 scallops in wetting reaction between molten solder and copper. Acta Mater. 56, 1075–1083 (2008).10.1016/j.actamat.2007.11.009 ↗
47. M. Onishi and H. Fujibuchi, Reaction-diffusion in the Cu–Sn system. Mater. Trans. JIM 16, 539–547 (1975).10.2320/matertrans1960.16.539 ↗