Effects of Grain Size on the Ag Dissolution and Ion Migration of Ag-4Pd Alloy Wires
Source abstract
Abstract
Ion migration and corrosion behavior in Ag-4Pd alloy wires with fine and coarse grains in the outer regions were evaluated with water drop tests. The results from the in situ observations and measurements of Ag ion migration in both Ag-4Pd bonding wires indicated that the fine-grained wire had much shorter times of dendrite contact and short circuit than those of coarse-grained wire for various wire spaces. It was obvious that grain refinement in Ag-4Pd alloy wires accelerated the ion migration of Ag-4Pd alloy wires. Electrochemical polarization tests confirmed that the passive film on fine-grained Ag-4Pd wire was easily broken down, leading to a higher Ag dissolution tendency than that of coarse-grained wire. Although an annealing twin-rich Ag-4Pd alloy wire was shown to enhance the thermal stability of the grain structure and mechanical properties, the large number of twins had no influence on the formation of Ag dendrites on the cathode and Ag2O oxide on the anode of the coarse-grained Ag-4Pd wire couple during ion migration.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Copper Interconnects and Reliability · Electrodeposition and Electroless Coatings · Electronic Packaging and Soldering Technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. M.K. Chung, Y.S. Choi, J.G. Kim, Y.M. Kim, and J.C. Lee, Mater. Sci. Eng. A 366, 282 (2004).10.1016/j.msea.2003.08.056 ↗
2. R.J. Hellmig, M. Janecek, B. Hadzima, O.V. Gendelman, M. Shapiro, X. Molodova, A. Springer, and Y. Estrin, Mater. Trans. 49, 31 (2008).10.2320/matertrans.ME200717 ↗
3. M. Niikura, M. Fujioka, Y. Adachi, A. Matsukura, T. Yokota, Y. Shirota, and Y. Hagiwara, J., Mater. Process. Technol. 117, 341 (2001).10.1016/S0924-0136(01)00800-7 ↗
4. K.D. Ralston, and N. Birbilis, Corrosion 66, 075005–075013 (2010).10.5006/1.3462912 ↗
5. W.R. Osorio, C.M. Freire, and A. Garcia, Mater. Sci. Eng. A 402, 22 (2005).10.1016/j.msea.2005.02.094 ↗
6. R. Ambat, N.N. Aung, and W. Zhou, Corros. Sci. 42, 1433 (2000).10.1016/S0010-938X(99)00143-2 ↗
7. S. Tao, and D.Y. Li, Nanotechnology 17, 65 (2006).10.1088/0957-4484/17/1/012 ↗
8. G. Ben Hamu, D. Eliezer, and L. Wagner, J. Alloys Compd. 468, 222 (2009).10.1016/j.jallcom.2008.01.084 ↗
9. G. Ben Hamu, D. Eliezer, and C.E. Cross, Mater. Sci. Eng. A 452, 210 (2007).10.1016/j.msea.2006.12.122 ↗
10. S. J. Krumbein, IEEE Trans. Components, Hybrids Manuf. Technol. 11, 5 (1988).10.1109/33.2957 ↗
11. J. Kim, and S.D. Park, Eng. Fail. Anal. 28, 252 (2013).10.1016/j.engfailanal.2012.10.019 ↗
12. P. Bojta, P. Nemeth, and G. Harsanyi, Microelectron. Reliabili. Microelectron. Reliabili. 42, 1213 (2002).10.1016/S0026-2714(02)00083-5 ↗
13. M. Chen, X. Shan, T. Geske, J. Li, and Z. Yu, ACS Nano 11, 6312 (2017).10.1021/acsnano.7b02629 ↗
14. C.H. Tsai, C.H. Chuang, H.H. Tsai, J.D. Lee, Dennis Chang, H.J. Lin, and T.H. Chuang, IEEE Trans. Compon. Packaging Manuf. Technol. 6, 298 (2016).10.1109/TCPMT.2015.2453410 ↗
15. T.H. Chuang, C.C. Chang, C.H. Chuang, J.D. Lee, and H.H. Tsai, IEEE Trans. Compon. Packaging Manuf. Technol. 3, 3 (2013).10.1109/TCPMT.2012.2221090 ↗
16. T.H. Chuang, H.C. Wang, C.H. Chuang, H.J. Lin, J.D. Lee, and T.H. Chuang, Metall. Mater. Trans. A 44, 5106 (2013).10.1007/s11661-013-1879-4 ↗
17. T.H. Chuang, H.J. Lin, C.H. Chuang, Y.Y. Shiue, F.S. Shieu, Y.L. Huang, P.C. Hsu, J.D. Lee, and H.H. Tsai, J. Alloys Compd. 615, 891 (2014).10.1016/j.jallcom.2014.07.057 ↗
18. C.H. Chuang, Y.C. Lin, Y.Z. He, C.H. Tsai, J.D. Lee, S.C. Wang, and H.H. Tsai, Mater. Sci. Forum, Mater. Sci. Forum 863, 95 (2016).10.4028/www.scientific.net/MSF.863.95 ↗
19. Y.C. Lin, C.H. Chen, Y.Z. He, S.C. Chen, and T.H. Chuang, J. Electronic Mater. 47, 3634 (2018).10.1007/s11664-018-6210-0 ↗
20. C.H. Chen, Y.C. Lin, Y.T. Shih, S.C. Chen, C.H. Tsai, S.C. Wang, and T.H. Chuang, Evaluation of corrosion resistance of Ag-alloy bonding wires for electronic packaging IEEE Trans. Compon. Packaging Manuf. Technol. 8, 146 (2018).10.1109/TCPMT.2017.2765899 ↗
21. Kim. Vu, Silver migration–The mechanism and effects on thick-film conductors. (CiteSeerX, 2003), http://citeseerx.ist.psu.edu/viewdoc/summary?doi=10.1.1.516.6359, Accessed 26 June 2021.
22. ASTM F1996-01, Standard test method for silver migration for membrane switch circuitry, 1996.