Interfacial Reactions of Sn-3.0Ag-0.5Cu Solder with Sputter Cu-Ti Alloy Film UBM
Source abstract
Abstract
Herein, the influence of Ti additive on the formation of intermetallic compounds (IMC) in a SAC/Cu-Ti soldered joint and corresponding mechanical properties are systematically investigated. The Ti-to-Cu ratio under bump metallization (UBM) is adjusted by tuning the target current during magnetron sputtering. Interestingly, the needle-like IMC, which is different from the traditional scallop-like IMC, is formed in the SAC/Cu-Ti soldered joint after reflow. The growth of Cu3Sn and Kirkendall voids is significantly inhibited after thermal aging in the SAC/Cu-Ti soldered joint. Overall, the segregation of Ti at grain boundaries forms a titanium-rich layer. Also, the Ti-rich layer acts as a diffusion barrier layer and hinders the diffusion of Cu into IMC. The shear strength test results show that SAC/Cu-Ti has much stronger strength than SAC/Cu both before and after thermal aging. These results confirm that Cu-Ti UBM is beneficial to the improvement of welding reliability.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Advanced Welding Techniques Analysis · 3D IC and TSV technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (33)
Show source-provided references
1. J.Y. Park, W. Seo, S. Yoo, and Y.H. Kim, J. Alloys Compd. 724, 492 (2017).10.1016/j.jallcom.2017.07.072 ↗
2. C.E. Ho, L.H. Hsu, C.H. Yang, T.C. Yeh, and P.T. Lee, Thin Solid Films 584, 257 (2015).10.1016/j.tsf.2014.12.026 ↗
3. B. Liu, Y. Tian, W. Liu, W. Wu, and C. Wang, Mater. Lett. 163, 254 (2016).10.1016/j.matlet.2015.10.108 ↗
4. J. Kim, S.B. Jung, and J.W. Yoon, J. Alloys Compd. 805, 1013 (2019).10.1016/j.jallcom.2019.07.184 ↗
5. Z.L. Ma, and C.M. Gourlay, J. Alloys Compd. 706, 596 (2017).10.1016/j.jallcom.2017.02.243 ↗
6. T.J. Kim, Y.M. Kim, and Y.H. Kim, J. Alloys Compd. 535, 33 (2012).10.1016/j.jallcom.2012.04.062 ↗
7. F.Y. Ouyang, G.L. Hong, Y.R. Hsu, S.Y. Mao, and W.J. Liu, Microelectron. Reliab. 97, 16 (2019).10.1016/j.microrel.2019.03.005 ↗
8. V. Vuorinen, H.Q. Dong, and T. Laurila, J. Mater. Sci.-Mater. Electron. 23, 68 (2011).10.1007/s10854-011-0426-6 ↗
9. W. Fu, X.G. Song, S.P. Hu, J.H. Chai, J.C. Feng, and G.D. Wang, Mater. Des. 87, 579 (2015).10.1016/j.matdes.2015.08.081 ↗
10. Y.D. Han, Y. Gao, S.T. Zhang, H.Y. Jing, J. Wei, L. Zhao, and L.Y. Xu, Mater. Sci. Eng. A 761, 138051 (2019).10.1016/j.msea.2019.138051 ↗
11. J.Y. Wang, Y.K. Tang, C.Y. Yeh, P.J. Chang, Y.X. Lin, E.J. Lin, C.Y. Wu, W.X. Zhuang, and C.Y. Liu, J. Alloys Compd. 797, 684 (2019).10.1016/j.jallcom.2019.05.146 ↗
12. T.T. Chou, R.W. Song, W.Y. Chen, and J.G. Duh, Mater. Lett. 235, 180 (2019).10.1016/j.matlet.2018.10.050 ↗
13. J. Bi, A. Hu, J. Hu, T. Luo, M. Li, and D. Mao, Microelectron. Reliab. 51, 636 (2011).10.1016/j.microrel.2010.09.028 ↗
14. J. Bang, D.Y. Yu, Y.H. Ko, J.H. Son, H. Nishikawa, and C.W. Lee, Microelectron. Reliab. 99, 62 (2019).10.1016/j.microrel.2019.05.019 ↗
15. W.M. Chen, S.K. Kang, and C.R. Kao, J. Alloys Compd. 520, 244 (2012).10.1016/j.jallcom.2012.01.032 ↗
16. L.W. Lin, J.M. Song, Y.S. Lai, Y.T. Chiu, N.C. Lee, and J.Y. Uan, Microelectron. Reliab. 49, 235 (2009).10.1016/j.microrel.2008.10.001 ↗
17. W.F. Huang, X.Q. Yang, and J. Xu, South. Met. 176, 13 (2010).
18. W. Fu, S.P. Hu, X.G. Song, J.X. Li, J. Cao, J.C. Feng, and G.D. Wang, Carbon 121, 536 (2017).10.1016/j.carbon.2017.06.030 ↗
19. C.T. Peng, C.T. Kuo, K.N. Chiang, T. Ku, and K. Chang, Microelectron. Reliab. 46, 523 (2006).10.1016/j.microrel.2005.06.010 ↗
20. W. Fu, X.G. Song, Y.X. Zhao, J. Cao, J.C. Feng, C. Jin, and G.D. Wang, Mater. Des. 115, 1 (2017).10.1016/j.matdes.2016.11.041 ↗
21. S. Zhou, C.H. Yang, S.K. Lin, A.N. AlHazaa, O. Mokhtari, X. Liu, and H. Nishikawa, Mater. Sci. Eng. A 744, 560 (2019).10.1016/j.msea.2018.12.012 ↗
22. Y.W. Yen, A.D. Laksono, and C.Y. Yang, Microelectron. Reliab. 96, 29 (2019).10.1016/j.microrel.2019.03.006 ↗
23. I.E. Anderson, and J.L. Harringa, J. Electron. Mater. 35, 94 (2006).10.1007/s11664-006-0190-1 ↗
24. H.F. Zou, H.J. Yang, and Z.F. Zhang, Acta Mater. 56, 2649 (2008).10.1016/j.actamat.2008.01.055 ↗
25. C.F. Tseng, K.J. Wang, and J.G. Duh, J. Electron. Mater. 39, 2522 (2010).10.1007/s11664-010-1371-5 ↗
26. L.C. Tsao, J. Alloys Compd. 509, 8441 (2011).10.1016/j.jallcom.2011.05.116 ↗
27. Q.H. Li, C.F. Li, W. Zhang, W.W. Chen, and Z.Q. Liu, Microelectron. Reliab. 99, 12 (2019).10.1016/j.microrel.2019.05.015 ↗
28. K.S. Kim, S.H. Huh, and K. Suganuma, Microelectron. Reliab. 43, 259 (2003).10.1016/S0026-2714(02)00239-1 ↗
29. K.N. Tu, and R.D. Thoimpson, Acta Mater. 30, 947 (1982).10.1016/0001-6160(82)90201-2 ↗
30. K. Zeng, R. Stierman, T.C. Chiu, D. Edwards, K. Ano, and K.N. Tu, J. Appl. Phys. 97, 024508 (2005).10.1063/1.1839637 ↗
31. W. Peng, E. Monlevade, and M.E. Marques, Microelectron. Reliab. 47, 2161 (2007).10.1016/j.microrel.2006.12.006 ↗
32. C. Yang, F. Le, and S.W.R. Lee, Microelectron. Reliab. 62, 130 (2016).10.1016/j.microrel.2016.03.021 ↗
33. M. Ghosh, A. Kar, S.K. Das, and A.K. Ray, Metall. Mater. Trans. A Phys. Metall. Mater. Sci. 40, 2369 (2009).10.1007/s11661-009-9948-4 ↗