Titanium Oxide Films Prepared by Cathodic Electrodeposition Method
Source abstract
Abstract
In this paper, titanium oxide (TiO2) films were prepared by cathodic electrodeposition using titanium oxysulfate (TiOSO4), potassium nitrate (KNO3), citric acid, and hydrogen peroxide (H2O2) as reactants. The article investigated the effect of citric acid and deposition temperature on the structure and electrochemical properties of TiO2 films. The results indicated that hydrous TiO2 thin films were prepared at 60°C when no citric acid was added, while thin films containing hydrous TiO2 and anatase phase were fabricated at 60–75°C when citric acid was added. It was found that adding citric acid and raising the reaction temperature (60–75°C) were beneficial to reduce crack width until cracks disappeared. Adding citric acid facilitated phase transition from hydrous TiO2 to anatase. Continuous and uniform TiO2 thin film was prepared at 75°C, which was found to have ideal capacitive behavior with a rectangular cyclic voltammogram and high photocurrent performance with photocurrent 2.89 μA, which is several times higher than that of cracked samples.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: TiO2 Photocatalysis and Solar Cells · Electrophoretic Deposition in Materials Science · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. T. Raguram and K.S. Rajni, J Sol-Gel Sci Tech. (2020). https://doi.org/10.1007/s10971-019-05180-3.10.1007/s10971-019-05180-3 ↗
2. A.M. Peiró, J. Peral, C. Domingo, X. Domènech, and J.A. Ayllón, Chem. Mater. (2001). https://doi.org/10.1021/cm0012419.10.1021/cm0012419 ↗
3. L. Henrik, S. Sven, S. Anita, R. Haakan, H. Johan, H. Anders, and L. Sten-Eric, J Phys Chem B. (1997). https://doi.org/10.1021/jp970490q.10.1021/jp970490q ↗
4. P. Parastoo Agharezaei, H. Hossein Abdizadeh, and M.R. Mohammad Golobostanfard, Ceram Inter. (2018). https://doi.org/10.1016/j.ceramint.2017.11.214.10.1016/j.ceramint.2017.11.214 ↗
5. C.M. Wang and S.Y. Lin, J. Solid State Electrochem. (2006). https://doi.org/10.1007/s10008-005-0690-6.10.1007/s10008-005-0690-6 ↗
6. C. Esparza-Contro, G. Berthomé, G. Renou, F. Robaut, S. Coindeau, C. Vachey, J. Cambin, M. Mantel, and L. Latu-Romain, Surf. Coat. Technol. (2020). https://doi.org/10.1016/j.surfcoat.2020.125643.10.1016/j.surfcoat.2020.125643 ↗
7. A. Watanabe and Y. Imai, Thin Solid Films (1999). https://doi.org/10.1016/S0040-6090(99)00012-7.10.1016/S0040-6090(99)00012-7 ↗
8. K. Kamada, M. Mukai, and Y. Matsumoto, Electrochim. Acta (2002). https://doi.org/10.1016/S0013-4686(02)00251-7.10.1016/S0013-4686(02)00251-7 ↗
9. M. Chigane, T. Shinagawa, and J. Tani, Thin Solid Films (2017). https://doi.org/10.1016/j.tsf.2017.03.031.10.1016/j.tsf.2017.03.031 ↗
10. I. Zhitomirsky, Adv. Colloid Interface Sci. (2002). https://doi.org/10.1016/S0001-8686(01)00068-9.10.1016/S0001-8686(01)00068-9 ↗
11. S. Patra, C. Andriamiadamanana, M. Tulodziecki, C. Davoisne, P.L. Taberna, and F. Frédéric Sauvage, Sci Rep. (2016). https://doi.org/10.1038/srep21588.10.1038/srep21588 ↗
12. H. Chettah, D. Abdi, H. Amardjia, and H. Haffar, Ionics (2009). https://doi.org/10.1007/s11581-008-0246-8.10.1007/s11581-008-0246-8 ↗
13. H. Liu, Z. Zheng, D. Yang, E. Waclawik, X. Ke, H. Zhu, S. Palmer, and R.L. Frost, J. Raman Spectrosc. (2010). https://doi.org/10.1002/jrs.2632.10.1002/jrs.2632 ↗
14. C. Liu, X.H. Lu, G. Yu, X. Feng, Q. Zhang, and Z.Z. Xua, Mater. Chem. Phys. (2005). https://doi.org/10.1016/j.matchemphys.2005.05.022.10.1016/j.matchemphys.2005.05.022 ↗
15. M. Vishwas, K.N. Rao, and R.P.S. Chakradhar, Spectrochim Acta A Mol. Biomol. Spectrosc. (2012). https://doi.org/10.1016/j.saa.2012.09.009.10.1016/j.saa.2012.09.009 ↗
16. O. Frank, M. Zukalova, B. Laskova, J. Ku¨rti, J. Koltai, and L. Kavan, Phys. Chem. Chem. Phys. (2012). https://doi.org/10.1039/c2cp42763j.10.1039/c2cp42763j ↗
17. P.C.T. D’Ajello, M.A. Fiori, A.A. Pasa, and Z.G. Kipervaser, J. Electrochem. Soc. 147, 4562 (2000).10.1149/1.1394101 ↗
18. C. Natarajan and G. Nogami, J. Electrochem. Soc. 143, 1547 (1996).10.1149/1.1836677 ↗
19. X.L. Sui, Z.B. Wang, C.Z. Li, J.J. Zhang, L. Zhao, and D.M. Gu, J Power Sour. (2014). https://doi.org/10.1016/j.jpowsour.2014.08.074.10.1016/j.jpowsour.2014.08.074 ↗
20. F. Cverna, Thermal properties of metals (Ohio: Materials Park, 2002), p. 9.
21. S.S. Jiang and K.F. Zhang, Mater. Des. (2009). https://doi.org/10.1016/j.matdes.2009.03.023.10.1016/j.matdes.2009.03.023 ↗
22. A. Kraemer, C. Kunz, S. Graef, and F.A. Müller, Appl. Surf. Sci. (2015). https://doi.org/10.1016/j.apsusc.2015.07.055.10.1016/j.apsusc.2015.07.055 ↗
23. H. Zhu, Q. Li, Y. Ren, L. Fan, J. Chen, J. Deng, and X. Xing, Adv. Mater. (2016). https://doi.org/10.1002/adma.201600973.10.1002/adma.201600973 ↗
24. X. Lu, G. Wang, T. Zhai, M. Yu, J. Gan, Y. Tong, and Y. Li, Nano Lett. (2012). https://doi.org/10.1021/nl300173j.10.1021/nl300173j ↗
25. V.H. Pham, T.D. Nguyen-Phan, X. Tong, B. Rajagopalan, J.S. Chung, and J.D. Dickerson, Carbon (2018). https://doi.org/10.1016/j.carbon.2017.10.1016/j.carbon.2017 ↗
26. X.Y. Cao, X. Xing, N. Zhang, H. Gao, M.Y. Zhang, Y.C. Shang, and X.T. Zhang, J. Mater. Chem. (2015). https://doi.org/10.1039/c4ta06138a.10.1039/c4ta06138a ↗
27. L.H. Cui, Y. Wang, X. Shu, J.F. Zhang, C.P. Yu, J.W. Cui, H.M. Zheng, Y. Zhang, and Y.Y. Wu, RSC Adv. (2016). https://doi.org/10.1039/c5ra25581c.10.1039/c5ra25581c ↗
28. X. Dong, J. Tao, Y. Li, and H. Zhu, Appl. Surf. Sci. (2010). https://doi.org/10.1016/j.apsusc.2009.10.100.10.1016/j.apsusc.2009.10.100 ↗
29. K.K. Supriyono, K.K. Yuni, and G. Jarnuzi, AIP Conference Proceed. (2016). https://doi.org/10.1063/1.4946952.10.1063/1.4946952 ↗
30. H. Chettah, D. Abdi, H. Amardjia, and H. Haffar, Ionics (2009). https://doi.org/10.1007/s11581-008-0246-8.10.1007/s11581-008-0246-8 ↗