The Variation of Microstructure and the Improvement of Shear Strength in SAC1205-xNi/OSP Cu Solder Joints Before and After Aging
Source abstract
Abstract
The correlations between different Ni contents in Sn-1.2Ag-0.5Cu-xNi (wt.%; x = 0, 0.05, 0.1)/organic solderability preservative Cu solder joints and shear test performance before and after aging were probed. With the aid of electron back scattering diffraction analysis and a scanning electron microscope, complexity in microstructure of Ni-doped solder joints was investigated. The results of a slow speed shear test revealed that the peak force of solder joints was efficiently enhanced by the addition of Ni before and after aging. The improvement of mechanical strength was ascribed to the modification of microstructure by the introduction of minor Ni addition. Spread and tiny intermetallic compounds, and the oriented interlaced structure in Ni-doped solder joints acted as hindrances for propagation of cracks and dislocations. It is revealed that solder joints with minor Ni doping tend to exhibit better mechanical reliability in advanced electronic packaging no matter before or after aging.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (14)
Show source-provided references
1. K.N. Tu and K. Zeng, in Electronic Components & Technology Conference Proceedings (2002), pp. 1194–1200.
2. F.X. Che, W.H. Zhu, E.S.W. Poh, X.W. Zhang, and X.R. Zhang, J. Alloys Compd. 507, 215–224 (2010).10.1016/j.jallcom.2010.07.160 ↗
3. F. Cheng, F. Gao, J. Zhang, W. Jin, and X. Xiao, J. Mater. Sci. 46, 3424–3429 (2011).10.1007/s10853-010-5231-8 ↗
4. P.L.A.F. Guo, in Electronics Packaging Technology Conference Proceedings (2006), pp. 717–721.
5. A.I.E., Development of Sn-Ag-Cu and Sn-Ag-Cu-X alloys for Pb-free electronic solder applications. In: Lead-Free Electronic Solders. (Springer, Boston, MA, 2006), pp. 55–76.10.1007/s10854-006-9011-9 ↗
6. A.A. El-Daly, A.E. Hammad, A. Fawzy, and D.A. Nasrallh, Mater. Des. 43, 40 (2013).10.1016/j.matdes.2012.06.058 ↗
7. P. Liu, P. Yao, and J. Liu, J. Alloys Compd. 486, 474 (2009).10.1016/j.jallcom.2009.06.171 ↗
8. C.-Y. Yu, T.-K. Lee, M. Tsai, K.-C. Liu, and J.-G. Duh, J. Electron. Mater. 39, 2544 (2010).10.1007/s11664-010-1372-4 ↗
9. C. Fleshman, W.-Y. Chen, T.-T. Chou, J.-H. Huang, and J.-G. Duh, Mater. Chem. Phys. 189, 76 (2017).10.1016/j.matchemphys.2016.12.013 ↗
10. R. Kinyanjui, L.P. Lehman, L. Zavalij, and E. Cotts, J. Mater. Res. 20, 2914 (2011).10.1557/JMR.2005.0361 ↗
11. B.S.S. Chandra Rao, J. Weng, L. Shen, T.K. Lee, and K.Y. Zeng, Microelectron. Eng. 87, 2416 (2010).10.1016/j.mee.2010.04.017 ↗
12. K.E. Yazzie, H.X. Xie, J.J. Williams, and N. Chawla, Scripta Mater. 66, 586 (2012).10.1016/j.scriptamat.2012.01.009 ↗
13. B. Arfaei, N. Kim, and E.J. Cotts, J. Electron. Mater. 41, 362 (2011).10.1007/s11664-011-1756-0 ↗
14. L.P. Lehman, Y. Xing, T.R. Bieler, and E.J. Cotts, Acta Mater. 58, 3546 (2010).10.1016/j.actamat.2010.01.030 ↗