Optimization of Design Parameters and Operating Conditions of Electrochemical Capacitors for High Energy and Power Performance
Source abstract
Abstract
Theoretical expressions for performance parameters of different electrochemical capacitors (ECs) were optimized by writing MATLAB scripts to solve them and also via MATLAB R2014a optimization tool box. Performance of different kind of ECs at given circumstances were compared through theoretical equations and simulation of various models subject to conditions of device components, using optimal coefficient associated to battery-kind material and constant associated to electrolyte material KBMopt and KEopt , as well as our symmetric electric double layer capacitor (EDLC) experimental data. Estimations of performance parameters were feasible and achievable once details of electrodes mass ratio, operating potential range ratio and specific capacitance of electrolyte are known. Performances of asymmetric EC with suitable electrode mass and operating potential range ratios using aqueous electrolytes, and that with suitable electrode mass and operating potential range ratios using organic electrolyte with appropriate operating potential range and specific capacitance were factors of 2.2 and 5.56, respectively, greater than those of symmetric EDLC and asymmetric EC using the same aqueous electrolyte, respectively. This enhancement came along with reduction in cell mass and volume. Also, storable and deliverable energies of asymmetric EC with suitable electrode mass and operating potential range ratios using proper organic electrolyte were factor of 12.9 greater than those of symmetric EDLC using aqueous electrolyte, with reduction in cell mass and volume. Storable energy, energy density and power density of asymmetric EDLC with suitable electrode mass and operating potential range ratios using proper organic electrolyte were factor of 5.56 higher than those of similar symmetric EDLC using aqueous electrolyte with reduction in cell mass and volume by a factor 1.77. Also, introduction of asymmetric EDLC with the same type of electrode, and suitable electrodes mass ratio, working potential range ratios and proper organic electrolyte enhanced performance of conventional symmetric EDLC using aqueous electrolyte with reduction in cell mass and volume. These results can obviously reduce number of experiments to determine optimum manufacturing state of EC, and also demonstrated that institution of asymmetric electrode and organic electrolyte was very successful in improving performance of EC with reduction in cell mass and volume. These results can as well be a guideline for design, fabrication and operation of electrochemical capacitor with outstanding storable energy, energy and power densities. Key words: Electrodes symmetry; Modelling and simulation; Performance parameters; Electrolytes type; Working potential range; Asymmetric capacitors.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Supercapacitor Materials and Fabrication · Advancements in Battery Materials · Advanced Battery Technologies Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (54)
Show source-provided references
1. B.E. Conway, V. Birss, and J. Wojtowicz, J. Power Sources 66, 1 (1997).10.1016/S0378-7753(96)02474-3 ↗
2. A. Burke, Electrochim. Acta 53, 1083 (2007).10.1016/j.electacta.2007.01.011 ↗
3. A. Yoshino, T. Tsubata, M. Shimoyamada, H. Satake, Y. Okano, S. Mori, and S. Yata, J. Electrochem. Soc. 151, A2180 (2004).10.1149/1.1813671 ↗
4. A. Balducci, U. Bardi, S. Caporali, M. Mastragostino, and F. Soavi, Electrochem. Commun. 6, 566 (2004).10.1016/j.elecom.2004.04.005 ↗
5. A. Balducci, R. Dugas, P.L. Taberna, P. Simon, D. Plée, M. Mastragostino, and S. Passerini, J. Power Sources 165, 922 (2007).10.1016/j.jpowsour.2006.12.048 ↗
6. D. Wei and T.W. Ng, Electrochem. Commun. 11, 1996 (2009).10.1016/j.elecom.2009.08.037 ↗
7. V. Khomenko, E. Raymundo-Piñero, and F. Béguin, J. Power Sources 195, 4234 (2010).10.1016/j.jpowsour.2010.01.006 ↗
8. W.G. Pell and B.E. Conway, J. Power Sources 136, 334 (2004).10.1016/j.jpowsour.2004.03.021 ↗
9. M. Conte, Fuel Cells 10, 806 (2010).10.1002/fuce.201000087 ↗
10. A.G. Pandolfo and A.F. Hollenkamp, J. Power Sources 157, 11 (2006).10.1016/j.jpowsour.2006.02.065 ↗
11. T. Brousse, P.-L. Taberna, O. Crosnier, R. Dugas, P. Guillemet, Y. Scudeller, Y. Zhou, F. Favier, D. Bélanger, and P. Simon, J. Power Sources 173, 633 (2007).10.1016/j.jpowsour.2007.04.074 ↗
12. D. Qu and H. Shi, J. Power Sources 74, 99 (1998).10.1016/S0378-7753(98)00038-X ↗
13. V. Khomenko, E. Raymundo-Piñero, and F. Béguin, J. Power Sources 177, 643 (2008).10.1016/j.jpowsour.2007.11.101 ↗
14. G.A. Snook, P. Kao, and A.S. Best, J. Power Sources 196, 1 (2011).10.1016/j.jpowsour.2010.06.084 ↗
15. E. Frackowiak, V. Khomenko, K. Jurewicz, K. Lota, and F. Béguin, J. Power Sources 153, 413 (2006).10.1016/j.jpowsour.2005.05.030 ↗
16. V. Khomenko, E. Raymundo-Piñero, and F. Béguin, J. Power Sources 153, 183 (2006).10.1016/j.jpowsour.2005.03.210 ↗
17. B.E. Conway and W.G. Pell, J. Solid State Electrochem. 7, 637 (2003).10.1007/s10008-003-0395-7 ↗
18. V. Ruiz, C. Blanco, R. Santamaría, J.M. Juárez-Galán, A. Sepúlveda-Escribano, and F. Rodríguez-Reinoso, Microporous Mesoporous Mater. 110, 431 (2008).10.1016/j.micromeso.2007.06.027 ↗
19. G.G. Amatucci, F. Badway, A.D. Pasquier, and T. Zheng, J. Electrochem. Soc. 148, A930 (2001).10.1149/1.1383553 ↗
20. E. Frackowiak and F. Béguin, Carbon 39, 937 (2001).10.1016/S0008-6223(00)00183-4 ↗
21. A. Burke, J. Power Sources 91, 37 (2000).10.1016/S0378-7753(00)00485-7 ↗
22. L.L. Zhang and X.S. Zhao, Chem. Soc. Rev. 38, 2520 (2009).10.1039/b813846j ↗
23. E. Frackowiak, Phys. Chem. Chem. Phys. 9, 1774 (2007).10.1039/b618139m ↗
24. A.S. Aricò, P. Bruce, B. Scrosati, J.-M. Tarascon, and W. van Schalkwijk, Nat. Mater. 4, 366 (2005).10.1038/nmat1368 ↗
25. Y. Zhang, H. Feng, X. Wu, L. Wang, A. Zhang, T. Xia, H. Dong, X. Li, and L. Zhang, Int. J. Hydrog. Energy 34, 4889 (2009).10.1016/j.ijhydene.2009.04.005 ↗
26. B.E. Conway, Electrochemical Supercapacitors: Scientific Fundamentals and Technological Applications (New York: Kluwer Academic/Plenum, 1999).10.1007/978-1-4757-3058-6 ↗
27. J. Schiffer, D. Linzen, and D.U. Sauer, J. Power Sources 160, 765 (2006).10.1016/j.jpowsour.2005.12.070 ↗
28. A. d’Entremont and L. Pilon, J. Power Sources 246, 887 (2014).10.1016/j.jpowsour.2013.08.024 ↗
29. P. Liu, M. Verbrugge, and S. Soukiazian, J. Power Sources 156, 712 (2006).10.1016/j.jpowsour.2005.05.055 ↗
30. H. Michel, J. Power Sources 154, 556 (2006).10.1016/j.jpowsour.2005.10.084 ↗
31. J.R. Miller, Electrochim. Acta 52, 1703 (2006).10.1016/j.electacta.2006.02.056 ↗
32. F. Rafik, H. Gualous, R. Gallay, A. Crausaz, and A. Berthon, J. Power Sources 165, 928 (2007).10.1016/j.jpowsour.2006.12.021 ↗
33. A. Lewandowski and M. Galinski, J. Power Sources 173, 822 (2007).10.1016/j.jpowsour.2007.05.062 ↗
34. B.E. Conway, W.G. Pell, and T.-C. Liu, J. Power Sources 65, 53 (1997).10.1016/S0378-7753(97)02468-3 ↗
35. B.W. Ricketts and C. Ton-That, J. Power Sources 89, 64 (2000).10.1016/S0378-7753(00)00387-6 ↗
36. H. Yang and Y. Zhang, J. Power Sources 196, 8866 (2011).10.1016/j.jpowsour.2011.06.042 ↗
37. H. Gualous, H. Louahlia-Gualous, R. Gallay, and A. Miraoui, IEEE Trans. Ind. Appl. 45, 1035 (2009).10.1109/TIA.2009.2018879 ↗
38. P. Guillemet, Y. Scudeller, and T. Brousse, J. Power Sources 157, 630 (2006).10.1016/j.jpowsour.2005.07.072 ↗
39. H.A. Andreas, J. Electrochem. Soc. 162, A5047 (2015).10.1149/2.0081505jes ↗
40. M. Al Sakka, H. Gualous, J. Van Mierlo, and H. Culcu, J. Power Sources 194, 581 (2009).10.1016/j.jpowsour.2009.06.038 ↗
41. L. Pilon, H. Wang, and A. d’Entremont, J. Electrochem. Soc. 162, A5158 (2015).10.1149/2.0211505jes ↗
42. A.L. d’Entremont and L. Pilon, J. Power Sources 273, 196 (2015).10.1016/j.jpowsour.2014.09.080 ↗
43. H.S. Choi and C.R. Park, J. Power Sources 259, 1 (2014).10.1016/j.jpowsour.2014.02.001 ↗
44. S.A. Kazaryan, S.N. Razumov, S.V. Litvinenko, G.G. Kharisov, and V.I. Kogan, J. Electrochem. Soc. 153, A1655 (2006).10.1149/1.2212057 ↗
45. J.A. Staser and J.W. Weidner, J. Electrochem. Soc. 161, E3267 (2014).10.1149/2.031408jes ↗
46. C. Zhong, Y. Deng, W. Hu, J. Qiao, L. Zhang, and J. Zhang, Chem. Soc. Rev. 44, 7484 (2015).10.1039/C5CS00303B ↗
47. H. Gao and K. Lian, RSC Adv. 4, 33091 (2014).10.1039/C4RA05151C ↗
48. L. Chen, H. Bai, Z. Huang, and L. Li, Energy Environ. Sci. 7, 1750 (2014).10.1039/C4EE00002A ↗
49. I.S. Ike, S. Iyuke, and I. Sigalas, Phys. Chem. Chem. Phys. 18, 28626-28647 (2016)10.1039/C6CP06214H ↗
50. T. Brousse, R. Marchand, P.-L. Taberna, and P. Simon, J. Power Sources 158, 571 (2006).10.1016/j.jpowsour.2005.09.020 ↗
51. S.-E. Chun, B. Evanko, X. Wang, D. Vonlanthen, X. Ji, G.D. Stucky, and S.W. Boettcher, Nat. Commun. 6, 7818 (2015).10.1038/ncomms8818 ↗
52. Z. Chen, V. Augustyn, J. Wen, Y. Zhang, M. Shen, B. Dunn, and Y. Lu, Adv. Mater. 23, 791 (2011).10.1002/adma.201003658 ↗
53. I.S. Ike, I. Sigalas, and S.E. Iyuke, J. Electron. Mater. (2016). doi: 10.1007/s11664-016-5053-9 .10.1007/s11664-016-5053-9 ↗
54. D. Cericola and R. Kötz, Electrochim. Acta 72, 1 (2012).10.1016/j.electacta.2012.03.151 ↗