Heat Transfer Analysis of an Engine Exhaust-Based Thermoelectric Evaporation System
Source abstract
Abstract
Engine exhaust can be used by thermoelectric generators for improving thermal efficiency of internal combustion engines. In his paper, the performance of a thermoelectric evaporation system is investigated. First, the thermal characteristics of diesel engines are obtained according to the experiment data. Then, mathematical models are created based on the specified conditions of the coolant cycle and the evaporator geometric parameters. Finally, the heat transfer characteristics and power performance of the thermoelectric evaporation system are estimated, and a comparison with the system in which the heat exchanger operates with all-liquid coolant is investigated. The results show that the overall heat transfer rate of the thermoelectric evaporator system increases with engine power. At the rated condition, the two-phase zone with an area of 0.8689 m2 dominates the evaporator’s heat transfer area compared with the preheated zone area of 0.0055 m2, and for the thermoelectric module, the cold-side temperature is stable at 74°C while the hot-side temperature drops from 341.8°C to 304.9°C along the exhaust direction. For certain thermoelectric cells, the temperature difference between the cold side and hot side rises with the engine load, and the temperature difference drops from 266.9°C to 230.6°C along the exhaust direction. For two cold-side systems with the same heat transfer, coolant mass flow rate in the evaporator with two-phase state is much less, and the temperature difference along with equivalent heat transfer length L is significantly larger than in the all-liquid one. At rated power point, power generated by thermoelectric cells in the two-phase evaporation system is 508.4 W, while the other is only 328.8 W.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Thermoelectric Materials and Devices · Refrigeration and Air Conditioning Technologies · Heat Transfer and Optimization
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. Y.D. Deng, W. Fan, K. Ling, and C.Q. Su, J. Electron. Mater. 41, 1698 (2012). doi: 10.1007/s11664-012-2068-8 .10.1007/s11664-012-2068-8 ↗
2. Y.D. Deng, W. Fan, Z.B. Tang, X.Y. Chang, K. Ling, and C.Q. Su, J. Electron. Mater. 42, 1522 (2013). doi: 10.1007/s11664-012-2312-2 .10.1007/s11664-012-2312-2 ↗
3. Y.D. Deng, X. Liu, S. Chen, and N.Q. Tong, J. Electron. Mater. 42, 1634 (2013). doi: 10.1007/s11664-012-2359-0 .10.1007/s11664-012-2359-0 ↗
4. G.J. Snyder and E.S. Toberer, Nat. Mater. 7, 105 (2008). doi: 10.1038/nmat2090 .10.1038/nmat2090 ↗
5. X. Gou, H. Xiao, and S. Yang, Appl. Energy 87, 3131 (2010). doi: 10.1016/j.apenergy.2010.02.013 .10.1016/j.apenergy.2010.02.013 ↗
6. Y.D. Deng, X. Liu, S. Chen, H.B. Xing, and C.Q. Su, J. Electron. Mater. 43, 1815 (2014). doi: 10.1007/s11664-013-2881-8 .10.1007/s11664-013-2881-8 ↗
7. D.T. Crane, C.R. Koripella, and V. Jovovic, J. Electron. Mater. 41, 1524 (2012). doi: 10.1007/s11664-012-1955-3.r .10.1007/s11664-012-1955-3 ↗
8. K.M. Saqr, M.K. Mansour, and M.N. Musa, Int. J. Auto. Tech-Kor. 9, 155 (2008). doi: 10.1007/s12239-008-0020-y .10.1007/s12239-008-0020-y ↗
9. N. Espinosa, M, Lazard, L. Aixala, and H. Scherrer. J. Electron. Mater. 32, 1146 (2010). doi: 10.1007/s11664-010-1305-2 .
10. C. Baker, P. Vuppuluri, L. Shi, and M. Hall, J. Electron. Mater. 41, 1290 (2012). doi: 10.1007/s11664-012-1915-y .10.1007/s11664-012-1915-y ↗
11. S. Kumar, S.D. Heister, X. Xu, J.R. Salvador, and G.P. Meisner, J. Electron. Mater. 42, 944 (2013). doi: 10.1007/s11664-013-2472-8 .10.1007/s11664-013-2472-8 ↗
12. M.Z. Shi and Z.Z. Wang, Principle and Design of Heat Exchangers, 4th ed. (Nanjing: Southeast University Press, 2009), p. 36.
13. H.G. Zhang, E.H. Wang, and B.Y. Fan, Energy Convers Manag. 65, 438 (2013). doi: 10.1016/j.enconman.2012.09.017 .10.1016/j.enconman.2012.09.017 ↗
14. http://en.wikipedia.org/wiki/Diesel_fuel , Diesel fuel, Wikipedia (2012).
15. REFPROP version 9.0, NIST standard reference database 23. The US Secretary of Commerce, America (2007).
16. W.Z. Gu, J.R.S. Shen, C.F. Ma, and Y.M. Zhang, Enhanced Heat Transfer (Beijing: Science Press, 1990), p. 410.
17. J.P. Holman, Heat Transfer, 9th ed. (New York: McGraw-Hill, 2002), p. 282.
18. X.Y. Huang, H. Wang, and H.T. Wang, J. Wuhan Univ. Technol. 33, 67 (2011).
19. S.M. Ghiaasiaan, Two-Phase Flow, Boiling, and Condensation: In Conventional and Miniature Systems (New York: Cambridge University Press, 2008), p. 303.10.1017/CBO9780511619410 ↗
20. T.L. Bergman, A.S. Lavine, F.P. Incropera, and D.P. Dewitt, Fundamentals of Heat and Mass Transfer, 7th ed. (New York: Wiley, 2011), pp. 711–715.
21. M. Ghazi, P. Ahmadi, A.F. Sotoodeh, and A. Taherkhani, Energy Convers Manag. 58, 149 (2012). doi: 10.1016/j.enconman.2012.01.008 .10.1016/j.enconman.2012.01.008 ↗
22. National standard of the People’s Republic of China, GB/T 18297–2001 (2001).