journal article·2010-08

Microstructural Analysis of Reballed Tin-Lead, Lead-Free, and Mixed Ball Grid Array Assemblies Under Temperature Cycling Test

Lei Nie, Maik Mueller, Michael Osterman, Michael Pecht

Journal of Electronic Materials· Volume 39· Issue 8
Publisher page

Abstract

In this study, ball grid array (BGA) packages with Sn-3.0Ag-0.5Cu (SAC305) solder balls were reballed with Sn-37Pb solder balls. Three different reballing methods were used. The non-reballed lead-free BGAs were assembled with SAC305 and Sn-37Pb solder pastes to form the lead-free and mixed assemblies. The reballed Sn-Pb BGAs were assembled with Sn-37Pb solder paste to form the reballed Sn-Pb assemblies. All assemblies were subjected to a temperature cycling test with a temperature range of −55°C to 125°C. For the same component type, the reballed BGA assemblies showed similar temperature cycling reliability regardless of the reballing methods. However, the temperature cycling reliability of the reballed assemblies was worse than that of the mixed and the lead-free assemblies. The mean cycles-to-failure of the mixed assemblies was larger than or equal to that of the lead-free assemblies. Failure analysis revealed that the failure site in reballed Sn-Pb assemblies was located in the bulk solder at the component side regardless of the component type and the reballing method, indicating that the reballing method did not influence the crack propagation in reballed assemblies. The mixed assemblies had the same failure site as the lead-free assemblies, i.e., in the bulk solder at the component side. The microstructure differences between the tin-lead, lead-free, and mixed assemblies are also discussed in detail.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Metallurgical and Alloy Processes · 3D IC and TSV technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. S. Ganesan and M. Pecht, Lead-Free Electronics (New York: Wiley, 2006).10.1002/047000780X ↗
2. M. Pecht, Y. Fukuda, and S. Rajagopal, IEEE Trans. Electron. Packag. 27, 221 (2004).10.1109/TEPM.2004.843150 ↗
3. R. Ciocci and M. Pecht, Circ. World 30, 34 (2004).10.1108/03056120410512226 ↗
4. L. Nie, M. Pecht, and R. Ciocci, Circ. World 33, 4 (2007).10.1108/03056120710750201 ↗
5. D. Santos, M. DiPietro, F. Andros, R. Alsalih, J. Tripp, and J. Ballus, Proceedings of 4th Annual Pan Pacific Microelectronics Symposium (Kauai, HI, USA: SMTA, 1999), p. 385.
6. F. Song and S.W.R. Lee, Proceedings of 1st Electronics System Integration Technology Conference (IEEE, 2006), p. 474.10.1109/ICIEA.2006.257190 ↗
7. W. Beair and W. Vuono, Proceedings of SMTA International Conference (Orlando, FL, USA: SMTA, 2008), p. 379.
8. L. Nie, M. Osterman, M. Pecht, F. Song, J. Lo, and S.K. Lee, Proceedings of IPC APEX EXPO (Las Vegas, NV, USA, 2008).
9. I. Chatterji, Proceedings of SMTA International Conference (Chicago, IL, USA: SMTA, 2006), p. 416.
10. A. Choubey, M. Osterman, and M. Pecht, IEEE Trans. Dev. Mater. Rel. 8, 160 (2008).10.1109/TDMR.2007.915049 ↗
11. P. Snugovsky, A. Zbrzezny, M. Kelly, and M. Romansky, Proceedings CMAP (Centre for Microelectronics Assembly and Packaging in Canada) International Conference on Lead-free Soldering, University of Toronto (Toronto, OB, Canada, 2005).
12. B. Nandagopal, Z. Mei, and S. Teng, Proceedings of 56th Electronic Components and Technology Conference (San Diego, CA, USA: IEEE, 2006), p. 875.
13. H. McCormick, P. Snugovsky, Z. Bagheri, S. Bagheri, C. Hamilton, G. Riccitelli, and R. Mohabir, Proceedings of SMTA International Conference (Chicago, IL, USA: SMTA, 2006), p. 425.
14. J. Nguyen, D. Geiger, D. Rooney, and D. Shangguan, IEEE Trans. Electron. Packag. 31, 227 (2008).10.1109/TEPM.2008.926282 ↗
15. R. Kinyanjui, Q. Chu, P. Snugovsky, and R. Coyle, Proceedings of IPC APEX EXPO (Las Vegas, NV, USA, 2008), p. S15-02.
16. IPC-9701, Performance Test Methods and Qualification Requirements for Surface Mount Solder Attachments, Northbrook, IL (2002).
17. IPC-SM-785, Guidelines for Accelerated Reliability Testing of Surface Mount Solder Attachments, Northbrook, IL (1992).
18. M. Mehrotra, L.A. Brack, E.J. Siméus, S.R. Stegura, T.Q. Do, K.R. Ladera, R.W. Jayne, and W.M. Lyons, Proceedings of SMTA International Conference (Orlando, FL, USA: SMTA, 2007).
19. D. Frear, D. Grivas, and J.W. Morris, J. Electron. Mater. 17, 171 (1988).10.1007/BF02652148 ↗
20. J. Manock, R. Coyle, B. Vaccaro, H. McCormic, R. Popowich, D. Fleming, P. Read, J. Osenbach, and D. Gerlach, J. Surf. Mt. Technol. 21, 36 (2008).
21. R. Coyle, P. Read, R. Popowich, D. Fleming, S. Kummerl, and I. Chatterji, Proceedings of IPC APEX EXPO (Las Vegas, NV, USA, 2008).
22. S. Dunford, S. Canumalla, and P. Viswanadham, Proceedings of 54th Electronic Components and Technology Conference (Las Vegas, NV, USA: IEEE, 2004), p. 726.
23. J. Bath, S. Sethuraman, X. Zhou, D. Willie, K. Hyland, K. Newman, L. Hu, D. Love, H. Reynolds, K. Kochi, D. Chiang, V. Chin, S. Teng, M. Ahmed, G. Henshall, V. Schroeder, Q. Nguyen, A. Maheswari, M.J. Lee, J.-P. Clech, J. Cannis, J. Lau, and C. Gibson, Proceedings of SMTA International Conference (Chicago, IL, USA: SMTA, 2005), p. 891.
24. B. Smith, P. Snugovsky, M. Brioux, and A. Grivon, Proceedings of IPC APEX EXPO (Las Vegas, NV, USA, 2008), p. S15-01.
25. J. Liang, S. Downes, N. Darriavach, D. Shangguan, and S.M. Heinrich, J. Electron. Mater. 33, 1507 (2004).10.1007/s11664-004-0092-z ↗
26. L. Nie, M. Dong, J. Cai, M. Osterman, and M. Pecht, Proceedings of 10th International Conference on Electronics Packaging Technology (Beijing, China: IEEE, 2009).