Effect of Annealing Ambient on the Electrical and Optical Properties of Aluminum-Doped ZnO Films Produced via a Sol–Gel Process
Source abstract
Abstract
In this study, aluminum-doped ZnO (AZO) thin films were prepared by a sol–gel with spin coating process. The AZO films were annealed by a two-step process. The films were first annealed in air or nitrogen at 500°C for 3 h, followed by annealing in three types of ambient, i.e., vacuum (10−3 Torr or 10−6 Torr) or forming gas (10% H2/90% N2), at 500°C for 4 h. The effect of the annealing ambient on the microstructure, electrical and optical properties of the AZO films was explored by x-ray diffraction, field-emission scanning electron microscopy, four-point probe sheet resistivity measurements, Hall voltage measurements, and ultraviolet–visible spectroscopy. The results showed that the size of AZO particulates in the films was determined mainly by the first annealing step. The films annealed in air in the first step were composed of larger AZO particulates than those annealed in nitrogen. The conductivities of the AZO films were significantly increased by the second annealing step. Second annealing in a high-vacuum system (10−6 Torr) led to the highest AZO film conductivity among the three ambients. Regardless of the various annealing processes, the films remained transparent under visible light and exhibited a sharp absorption edge in the ultraviolet region. The highest conductivity, i.e., 168 S cm−1, was obtained from films annealed first in air and then in vacuum of 10−6 Torr.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Ga2O3 and related materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. M. Selmi, F. Chaabouni, M. Abaab, and B. Rezig, Mater. Sci. Forum 636–637, 991 (2010).10.4028/www.scientific.net/MSF.636-637.991 ↗
2. B.Y. Oh, M.C. Jeong, W. Lee, and J.M. Myoung, J. Cryst. Growth 274, 453 (2005).10.1016/j.jcrysgro.2004.10.026 ↗
3. W.T. Seeber, M.O. Abou-Helal, S. Barth, D. Beil, T. Hoche, H.H. Afify, and S.E. Demian, Mater. Sci. Semicond. Process. 2, 45 (1999).10.1016/S1369-8001(99)00007-4 ↗
4. M. Law, L.E. Greene, J.C. Johnson, R. Saykallyl, and P. Yang, Nat. Mater. 4, 455 (2005).10.1038/nmat1387 ↗
5. G.G. Valle, P. Hammer, S.H. Pulcinelli, and C.V. Santilli, J.␣Eur. Ceram. Soc. 24, 1009 (2004).10.1016/S0955-2219(03)00597-1 ↗
6. F. Ruske, V. Sittinger, W. Werner, B. Szyszka, K.-U. van Osten, K. Dietrich, and R. Rix, Surf. Coat. Technol. 1–4, 236 (2005).10.1016/j.surfcoat.2005.01.019 ↗
7. S.H. Jeong and J.H. Boo, Thin Solid Films 447–448, 105 (2004).10.1016/j.tsf.2003.09.031 ↗
8. T. Ghosh and D. Basak, Chem. Phys. Lett. 528, 68 (2012).10.1016/j.cplett.2012.01.029 ↗
9. L. Zhao, J.S. Lian, Y.H. Liu, and Q. Jiang, Nonferr. Met. Soc. China 18, 145 (2008).10.1016/S1003-6326(08)60026-6 ↗
10. D.M. Bagnall, H.J. Koh, K.T. Park, K. Hiraga, Z. Zhu, and T. Yao, J. Appl. Phys. 84, 3912 (1998).10.1063/1.368595 ↗
11. M. Creatore, B.J. Kniknie, C.I.M.A. Spee, and M.C.M. van de Sanden, J. Appl. Phys. 102, 043709 (2007).10.1063/1.2772569 ↗
12. A.F. Aktaruzzaman, G.L. Sharma, and L.K. Malhortra, Thin Solid Films 198, 64 (1991).10.1016/0040-6090(91)90325-R ↗
13. A.M.P. Santos and E.J.P. Santos Edval, Thin Solid Films 516, 210 (2008).
14. S. Mridha and D. Basak, Mater. Res. Bull. 42, 875 (2007).10.1016/j.materresbull.2006.08.019 ↗
15. Y.S. Ho and K.Y. Lee, Thin Solid Films 519, 1431 (2010).10.1016/j.tsf.2010.09.006 ↗
16. S. Mridha and D. Basak, J. Phys. D 40, 6902 (2007).10.1088/0022-3727/40/22/008 ↗
17. B.J. Babu, A. Maldonado, S. Velumani, and R. Asomoza, Mater. Sci. Eng. B 174, 31 (2010).10.1016/j.mseb.2010.03.010 ↗
18. K.E. Lee, M. Wang, E.J. Kim, and S.H. Hahn, Curr. Appl. Phys. 9, 683 (2009).10.1016/j.cap.2008.06.006 ↗
19. N.F. Shih, S.T. Chen, C.C. Chang, C.Y. Kung, B.J. Chen, and P.C. Yao, J. Supercond. Nov. Magn. 23, 1189 (2010).10.1007/s10948-010-0659-2 ↗
20. H. Wang, M.H. Xu, J.W. Xu, M.F. Ren, and L. Yang, J.␣Mater. Sci. Mater. Electron. 21, 589 (2010).10.1007/s10854-009-9962-8 ↗
21. H. Wang, M.H. Xu, J.W. Xu, L. Yang, and S.J. Zhou, J.␣Mater. Sci. Mater. Electron. 21, 145 (2010).10.1007/s10854-009-9883-6 ↗
22. M. Sahal, B. Hartiti, A. Ridah, M. Mollar, and B. Marı′, Microelectron. J. 39, 1425 (2008).10.1016/j.mejo.2008.06.085 ↗
23. J. Li, J. Xu, Q. Xu, and G. Fang, J. Alloy Compd. 542, 151 (2012).10.1016/j.jallcom.2012.07.075 ↗
24. J.L. Chen, D. Chen, and Z.H. Chen, Labour Hist. Rev. 26, 47 (2010).
25. J.H. Lee and B.O. Park, Thin Solid Films 426, 94 (2003).10.1016/S0040-6090(03)00014-2 ↗
26. V. Musat, B. Teixeira, E. Fortunato, and R.C.C. Monteiro, Thin Solid Films 502, 219 (2006).10.1016/j.tsf.2005.07.278 ↗
27. M. Gao, X. Wu, J. Liu, and W. Liu, Appl. Surf. Sci. 257, 6919 (2011).10.1016/j.apsusc.2011.03.031 ↗
28. M. Ohyama, J. Am. Ceram. Soc. 81, 1622 (1998).10.1111/j.1151-2916.1998.tb02524.x ↗
29. Y.K. Tseng, G.J. Gao, and S.C. Chien, Thin Solid Films 518, 6259 (2010).10.1016/j.tsf.2010.03.143 ↗
30. M. Rydzek, M. Reidinger, M. Arduini-Schuster, and J. Manara, Thin Solid Films 520, 4114 (2012).10.1016/j.tsf.2011.04.105 ↗
31. P.C. Yao, S.T. Hang, M.J. Wu, and W.T. Hsiao, Thin Solid Films 520, 2846 (2012).10.1016/j.tsf.2011.11.045 ↗
32. P. Sagar, M. Kumar, and R.M. Mehra, Thin Solid Films 489, 94 (2005).10.1016/j.tsf.2005.05.009 ↗
33. S.S. Lin, J.L. Huang, and P. Sajgalik, Surf. Coat. Technol. 185, 254 (2004).10.1016/j.surfcoat.2003.12.007 ↗
34. W. Tang and D.C. Cameron, Thin Solid Films 238, 83 (1994).10.1016/0040-6090(94)90653-X ↗
35. K.M. Lin and P. Tsai, Thin Solid Film 515, 8601 (2007).10.1016/j.tsf.2007.04.012 ↗
36. J. Tauc, R. Grigorovichi, and A. Vancu, Phys. Status Solidi B 15, 627 (1966).10.1002/pssb.19660150224 ↗
37. J.I. Pankove, Optical Progress in Semiconductors (New York: Dover, 1975).