Design and Etching of Bandpass FSS in Hard-Coated Energy-Saving Glass to Improve Transmission of Useful RF/MW Signals
Source abstract
Abstract
An efective etching method is proposed to create frequency-selective Surface (FSS) on energy-saving glass (ESG) for the improvement of RF/MW signals ranging from 0.5 GHz to 5 GHz. ESG is commonly used in buildings to reduce energy consumption, but the coating on it blocks frequencies from 0.5 GHz to 5 GHz, causing problems in communication systems. The unit cell of the proposed FSS design was modeled and simulated in CST Microwave Studio, and the results were verifed through experimental work. The results showed that the proposed design provided full transmission for the entire microwave band from 0.5 GHz to 5 GHz, including GSM, 3G, 4G, and personal communication signals. The proposed method involves etching the FSS pattern on ESG with a cutting width of 1 mm by using a glass cutter tool. The design is angle- and polarization-insensitive, as it provided angular stability from 0° to 45° oblique incidence for both transverse electric (TE) and transverse magnetic (TM) modes. Moreover, only 9.03% of the ESG coating was removed, which is acceptable in terms of heat loss compared to recent research. On average, there is an improvement of about 18 dB in attenuation for the entire band as compared to full coating. This method outperforms previous etching techniques, as full transmission is achieved for the entire band and not just for some specifc bands. Moreover, a complete sample of the ESG was etched and used in measurements instead of a small portion of the ESG as used by other researchers. The measured results are in good agreement with simulations. A stable frequency response under oblique incidence was achieved for both the TE and TM polarization.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Antenna and Metasurface Technologies · Antenna Design and Analysis · Metamaterials and Metasurfaces Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. B. Munk, Frequency Selective Surfaces: Theory and Design (London: Wiley, 2000)10.1002/0471723770 ↗
2. G. Kiani, K. Esselle, A. Karlsson, and L.G. Olsson, Transmission improvement of useful signals through energy saving glass windows using frequency selective surfaces, in: WARS 2008 Conference, Workshop on Applications of Radio Science (Queensland, Australia, 2008), pp. 520–525
3. G.I. Kiani, L.G. Olsson, A. Karlsson, K.P. Esselle, and M. Nilsson, Cross-dipole bandpass frequency selective surface for energy-saving glass used in buildings. IEEE Trans. Antennas Propag. 59, 520 (2011)10.1109/TAP.2010.2096382 ↗
4. S. Habib, G.I. Kiani, and M.F.U. Butt, An efficient UWB FSS for electromagnetic shielding, in: Proceedings 2017 19th International Conference on Electromagnetics in Advanced Applications ICEAA p. 1543 (2017)10.1109/ICEAA.2017.8065578 ↗
5. D. Hamzaoui, F. Djahli, T.P. Vuong, T. Quynh Van Hoang, and G. Kiani, High gain long-read range AMC-backed tag antenna for European UHF RFID applications. Microwave Opt. Technol. Lett. 58, 2944–2948 (2016)10.1002/mop.30185 ↗
6. F.D. and G.I.K.D. Hamzaoui, T.P. Vuong, Novel compact dual-band artificial magnetic conductors for Wi-Fi applications, in: The 8th European Conference on Antennas and Propagation (EuCAP 2014) (IEEE, The Hague, Netherlands, 2014), pp. 2397–240010.1109/EuCAP.2014.6902300 ↗
7. J. Khan, N. Nayan, G.I. Kiani, and M.A. Hussaini, FSS design for improving transmission of microwave signals and wireless security in modern buildings. J. Electron. Mater. 50, 3438–3446 (2021)10.1007/s11664-021-08848-1 ↗
8. G.I. Kiani, L.G. Olsson, A. Karlsson, and K.P. Esselle, Transmission of infrared and visible wavelengths through energy-saving glass due to etching of frequency-selective surfaces. IET Microw. Antennas Propag. 4, 955 (2010)10.1049/iet-map.2009.0439 ↗
9. G.I. Kiani and J. Khan, Energy and communication efficient FSS for equivalent model of hard-coated energy saving glass. Adv. Mater. Res. 1160, 57 (2021)10.4028/www.scientific.net/AMR.1160.57 ↗
10. F. Bagci, C. Mulazimoglu, S. Can, E. Karakaya, A.E. Yilmaz, and B. Akaoglu, A glass based dual band frequency selective surface for protecting systems against WLAN signals. AEU - Int. J. Electron. Commun. 82, 426 (2017)10.1016/j.aeue.2017.10.018 ↗
11. CST MWS, CST Studio Suite Electromagnetic Field Simulation Software, https://www.3ds.com/products-services/simulia/products/cst-studio-suite/
12. Glass Cutter Tool, https://www.amazon.sa/-/en/Tools-Heavy-Metal-Cutter-5-5Inch/dp/B08DLQLR31/ref=sr_1_6?crid=2TNTFJXQA9PV6&keywords=glass+cutter&qid=1669802303&qu=eyJxc2MiOiI1LjA5IiwicXNhIjoiNC4zNCIsInFzcCI6IjIuNTMifQ%3D%3D&sprefix=glass+cutter%2Caps%2C153&sr=8-6
13. G.I. Kiani, A. Karlsson, L. Olsson, and K.P. Esselle, Glass characterization for designing frequency selective surfaces to improve transmission through energy saving glass windows, in: Asia-Pacific Microwave Conference Microwave Conference, 2007. APMC 2007. Asia-Pacific (IEEE, Bangkok, Thailand, 2007), pp. 1–410.1109/APMC.2007.4554974 ↗
14. FLUKE PM6303A AUTOMATIC RCL METER, https://assets.fluke.com/manuals/PM6303A_ogeng0000.pdf
15. O.V. Tereshchenko, F.J.K. Buesink, and F.B.J. Leferink, An overview of the techniques for measuring the dielectric properties of materials, in: 2011 30th URSI General Assembly and Scientific Symposium URSIGASS 2011 p.1 (2011)10.1109/URSIGASS.2011.6050287 ↗
16. R. Mittra, C.H. Chan, and T. Cwik, Techniques for analyzing frequency selective surfaces—a review. Proc. IEEE 76, 1593 (1988)10.1109/5.16352 ↗
17. H. Benjamin, Everything you ever wanted to know about frequency-selective surface filters but were afraid to ask, in Technical Report (2005)
18. D.K. Cheng, Field and Wave Electromagnetics, 2nd ed., (Boston: Addison-Wesly, 1989)
19. AARONIA, Directional active EMC antenna up to 6 GHz with 45 dBi Gain HyperLOG 7060 X, www.aaronia.com/products/antennas/HyperLog-7060-X
20. TTR506A, Vector network analyzers, https://www.tek.com/en/datasheet/vector-network-analyzers
21. F. Bagci, S. Can, E. Karakaya, C. Mulazimoglu, A.E. Yilmaz, and B. Akaoglu, Optically transparent frequency selective surface for filtering 2.6 GHz LTE band, in: 2017 4th International Electromagnetic Compatability Conference EMC Turkiye p. 8 (2017)10.1109/EMCT.2017.8090349 ↗