Effect of the Second-Phase Particle Distribution on the Brittle Fracture Behavior of Sn-3Ag-0.5Cu Solder
Source abstract
Abstract
The low-temperature impact test was used to examine the fracture morphology of Sn-3Ag-0.5Cu (SAC305) solder. The second-phase distribution of Ag3Sn and Cu6Sn5 particles on the grain boundary of SAC305 solder was obtained using a nanometer-scale focused ion beam and observed using a transmission electron microscope. The results show that as the temperature drops, the fracture mode of SAC305 solder shifts from ductile to brittle, and that the fracture mode is primarily influenced by crystal morphology. On the grain boundaries of the crystal, a large number of Ag3Sn particles and fewer Cu6Sn5 particles are discovered. The compositional analysis of the nanometer-scale fracture morphology reveals that the majority of the Cu elements are dispersed in the Sn matrix. The phase diagram and Sn activity help to understand this occurrence. The inhibitory effect of Ag on the creation of Cu compounds is further discussed, which not only promotes the connection between the soldering material and the Cu solder disc, but also reduces the fracture problem produced by the Cu6Sn5 second-phase particles.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · 3D IC and TSV technologies · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (17)
Show source-provided references
1. C. Wu, D.Q. Yu, C. Law, and L. Wang, Properties of lead-free solder alloys with rare earth element additions. Mater. Sci. Eng. R: Rep. 44, 1–44 (2004).10.1016/j.mser.2004.01.001 ↗
2. J.W. Yoon, S.W. Kim, and S.B. Jung, Interfacial reaction and mechanical properties of eutectic Sn-0.7Cu/Ni BGA solder joints during isothermal long-term aging. J. Alloy Compd. 391, 82–89 (2005).10.1016/j.jallcom.2004.09.001 ↗
3. L. Qu, N. Zhao, H.J. Zhao, M.L. Huang, and H.T. Ma, In situ study of the real-time growth behavior of Cu6Sn5 at the Sn/Cu interface during the soldering reaction. Scripta Mater. 72–73, 43–46 (2014).10.1016/j.scriptamat.2013.10.013 ↗
4. J.W. Yoon, H.S. Chun, and J.M. Koo, Microstructural evolution of Sn-rich Au-Sn/Ni flip-chip solder joints under high temperature storage testing conditions. Scripta Mater. 56, 661–664 (2007).10.1016/j.scriptamat.2006.12.031 ↗
5. A. Sharif, M.N. Islam, and Y.C. Chan, Interfacial reactions of BGA Sn-3.5%Ag-0.5%Cu and Sn-3.5Ag solders during high-temperature aging with Ni/Au metallization. Mater. Sci. Eng. B. 113, 184–189 (2004).10.1016/S0921-5107(04)00406-4 ↗
6. S.F. Choudhury and L. Ladani, Local shear stress-strain response of Sn-3.5Ag/Cu solder joint with high fraction of intermetallic compounds: experimental analysis. J. Alloys Compd. 680, 665–676 (2016).10.1016/j.jallcom.2016.04.184 ↗
7. H.T. Lee, M.H. Chen, H.M. Jao, and T.L. Liao, Influence of interfacial intermetallic compound on fracture behavior of solders joints. Mater. Sci. Eng. A. 358, 134–141 (2003).10.1016/S0921-5093(03)00277-6 ↗
8. H. Zou, Q. Zhu, and Z. Zhang, Growth kinetics of intermetallic compounds and tensile properties of Sn-Ag-Cu/Ag single crystal joint. J. Alloy. Compound. 461, 410–417 (2008).10.1016/j.jallcom.2007.07.001 ↗
9. K.S. Kim, S.H. Huh, and K. Suganuma, Effects of cooling speed on microstructure and tensile properties of Sn-Ag-Cu alloys. Mater. Sci. Eng. A. 333, 106–114 (2002).10.1016/S0921-5093(01)01828-7 ↗
10. F. Ochoa, J.J. Williams, and N. Chawla, Effects of cooling rate on the microstructure and tensile behavior of a Sn-3.5wt.%Ag solder. J. Electron. Mater. 32, 1414–1420 (2003).10.1007/s11664-003-0109-z ↗
11. J. Shen, Y.C. Liu, H.X. Gao, C. Wei, and Y.Q. Yang, Formation of bulk Ag3Sn intermetallic compounds in SnAg lead-free solders in solidification. J. Electron. Mater. 34, 1591–1597 (2005).10.1007/s11664-005-0170-x ↗
12. J.H. Lee, A.M. Yu, J.H. Kim, M.S. Kim, and N. Kang, Reaction properties and interfacial intermetallics for SnxAg0.5Cu solders as a function of Ag content. Met. Mater. Int. 14, 649–654 (2008).10.3365/met.mat.2008.10.649 ↗
13. Z. Zhu, H. Sun, F. Wu, and Y.-C. Chan, Comparative study of the microstructure and mechanical strength of tin-copper(Sn0.7Cu) solder modified with silver(Ag) by both alloying and doping methods. J. Mater. Sci: Mater. Electron. 27, 6835–6844 (2016).
14. K.J. Rnk, F. Loo, and J.K. Kivilahti, A diffusion-kinetic model for predicting solder/conductor interactions in high density interconnections. Metall. Mater. Trans. A. 29, 2951–2956 (1998).10.1007/s11661-998-0202-2 ↗
15. X. Ma, F. Wang, Y. Qian, and F. Yoshida, Development of Cu-Sn intermetallic compound at Pb-free solder/Cu joint interface. Mater. Lett. 57, 3361–3365 (2003).10.1016/S0167-577X(03)00075-2 ↗
16. T. Laurila, J. Hurtig, and V. Vuorinen, Effect of Ag, Fe, Au and Ni on the growth kinetics of Sn-Cu intermetallic compound layers. Microelectron. Reliab. 49, 242–247 (2009).10.1016/j.microrel.2008.08.007 ↗
17. D.Q. Yu, L. Wang, C.M.L. Wu, and C.M. Law, T The formation of nano-Ag3Sn particles on the intermetallic compounds during wetting reaction. J. Alloy. Comp. 389, 153–158 (2005).10.1016/j.jallcom.2004.08.017 ↗