Effect of Current Density on Microstructure, Microhardness, and Tribological Properties of Cu-Al2O3 Composite Coatings Prepared by Jet Electrodeposition
Source abstract
Abstract
Jet electrodeposition (JED) is a technology for special processing developed in recent years, which has unique advantages in the preparation of metal matrix composites (MMCs). The Cu-Al2O3 composite coating is a metal matrix composite material with copper as matrix and Al2O3 nanoparticles as reinforcement phase, which has better friction-reducing properties and wear resistance, and thus has important research significance in the field of surface repair and strengthening of large sliding friction pairs. In this work, Cu-Al2O3 nanocomposite coatings were prepared by JED, and the composite coatings were characterized by scanning electron microscopy (SEM), x-ray diffraction (XRD), Vickers hardness test, and wear test. The effects of current density on the microstructure, phase structure, microhardness, and tribological properties of the composite coating were studied. The results show that with an increase in current density in the range of 100–00 A/dm2, the various properties of the deposited layer first showed an increasing and then a decreasing trend. The critical current density of 300 A/dm2 was obtained under this test condition, the grain size was between 30 nm and 0 nm, the microhardness was 135.48 HV, the average friction coefficient was 0.27, and the wear weight loss was 3.6 mg. A Cu-Al2O3 composite coating with a smooth and dense surface and good properties was obtained.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electrodeposition and Electroless Coatings · Metal and Thin Film Mechanics · Copper Interconnects and Reliability
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. N. Shakibi Nia, J. Creus, X. Feaugas, and C. Savall, Influence of Metallurgical Parameters on the Electrochemical Behavior of Electrodeposited Ni and Ni–W Nanocrystalline Alloys. Appl. Surf. Sci. 370, 149 (2016).10.1016/j.apsusc.2016.02.101 ↗
2. H. Gül, F. Kılıç, M. Uysal, S. Aslan, A. Alp, and H. Akbulut, Effect of Particle Concentration on the Structure and Tribological Properties of Submicron Particle SiC Reinforced Ni Metal Matrix Composite (MMC) Coatings Produced by Electrodeposition. Appl. Surf. Sci. 258, 4260 (2012).10.1016/j.apsusc.2011.12.069 ↗
3. R. Aparicio-Fernández, H. Springer, A. Szczepaniak, H. Zhang, and D. Raabe, In-situ Metal Matrix Composite Steels: Effect of Alloying and Annealing on Morphology, Structure and Mechanical Properties of TiB 2 Particle Containing High Modulus Steels. Acta Mater. 107, 38 (2016).10.1016/j.actamat.2016.01.048 ↗
4. M. Ravikumar, H.N. Reddappa, R. Suresh, E.R. Babu, and C.R. Nagaraja, Study on Micro-nano Sized Al2O3 Particles on Mechanical, Wear and Fracture Behavior of Al7075 Metal Matrix Composites. Fract. Struct. Int. 15, 166 (2021).
5. J.K. Yu, Y.H. Wang, X.C. Zhao, Q.Y. Li, Q. Qiao, J. Zhao, S. Zhai, and S. Dymek, Wear Resistance of Ni-Based Alloy Coatings. Adv. Mater. Sci. Eng. 2019, 1 (2019).
6. F.C. Walsh and C. Ponce de Leon, A Review of the Electrodeposition of Metal Matrix Composite Coatings by Inclusion of Particles in a Metal Layer: An Established and Diversifying Technology. Trans. IMF. 92, 83 (2014).10.1179/0020296713Z.000000000161 ↗
7. X.R. Dai, K. Xu, Z.Y. Zhang, L.Y. Zhang, Y.C. Wu, H. Zhu, and S. Yang, Study on Cu-Al2O3 Metal-matrix Composite Coating Prepared by Laser-Assisted Electrodeposition. J. Electroanal. Chem. 904, 1 (2022).10.1016/j.jelechem.2021.115855 ↗
8. Y.L. Yang, Y.D. Wang, Y. Ren, C.S. He, J.N. Deng, J. Nan, J.G. Chen, and L. Zuo, Single-walled Carbon Nanotube Reinforced Copper Composite Coatings Prepared by Electrodeposition Under Ultrasonic Field. Mater. Lett. 62, 47 (2007).10.1016/j.matlet.2007.04.086 ↗
9. A.K. Pradhan and S. Das, Pulse-Reverse Electrodeposition of Cu-SiC Nanocomposite Coating: Effect of Concentration of SiC in the Electrolyte. J. Alloys Compd. 590, 294 (2014).10.1016/j.jallcom.2013.12.139 ↗
10. Y.P. Wu, Z.Y. Tang, Y. Wang, P. Cheng, H. Wang, and G.F. Ding, High Thermal Conductive Cu-Diamond Composites Synthesized by Electrodeposition and the Critical Effects of Additives on Void-Free Composites. Ceram. Int. 45, 19658 (2019).10.1016/j.ceramint.2019.06.215 ↗
11. X.H. Zheng, M. Wang, H. Song, D. Wu, X.T. Liu, and J. Tan, Effect of Ultrasonic Power and Pulse-on Time on the Particle Content and Mechanical Property of Co-Cr3C2 Composite Coatings by Jet Electrodeposition. Surf. Coat. Technol. 325, 181 (2017).10.1016/j.surfcoat.2017.06.062 ↗
12. H. Fan, Y.P. Zhao, J. Jiang, S.K. Wang, and Z.J. Li, Layered Manufacturing of Nanocrystalline Copper Parts Using Pulse Jet Electrodeposition and its Mechanical Properties. Int. J. Electrochem. Sci. 15, 8584 (2020).10.20964/2020.09.81 ↗
13. C. Bocking and D.B. Cameron, The Use of High Speed Selective Jet Electrodeposition of Gold for the Plating of Connectors. Trans. IMF. 72, 33 (2017).10.1080/00202967.1994.11871019 ↗
14. M. Kang, Y. Zhang, and H.Z. Li, Study on the Performances of Ni-Co-P/BN(h)Nanocomposite Coatings Made by Jet Electrodeposition. Proc. CIRP. 68, 221 (2018).10.1016/j.procir.2017.12.052 ↗
15. M.S. Rajput, P.M. Pandey, and S. Jha, Micromanufacturing by Selective Jet Electrodeposition Process. Int. J. Adv. Des. Manuf. Technol. 76, 61 (2015).10.1007/s00170-013-5470-3 ↗
16. H. Fan, Y.P. Zhao, S.N. Cao, and Z.J. Li, Effect of Thiourea on the Properties of a Cu-Al2O3 Coating Prepared via Jet Electrodeposition. Mater. Trans. 60, 802 (2019).10.2320/matertrans.M2019024 ↗
17. W. Jiang, L.D. Shen, M.B. Qiu, X. Wang, M.Z. Fan, and Z.J. Tian, Preparation of Ni-SiC Composite Coatings by Magnetic Field-Enhanced Jet Electrodeposition. J. Alloys Compd. 762, 115 (2018).10.1016/j.jallcom.2018.05.097 ↗
18. F.F. Xia, W.C. Jia, C.Y. Ma, R. Yang, Y. Wang, and M. Potts, Synthesis and Characterization of Ni-doped TiN Thin Films Deposited by Jet Electrodeposition. Appl. Surf. Sci. 434, 228 (2018).10.1016/j.apsusc.2017.10.203 ↗
19. M.S. Rajput, P.M. Pandey, and S. Jha, Modelling of High Speed Selective Jet Electrodeposition Process. J. Manuf. Processes. 17, 98 (2015).10.1016/j.jmapro.2014.07.012 ↗
20. M.S. Rajput, P.M. Pandey, and S. Jha, Micromanufacturing by Selective Jet Electrodeposition Process. Int. J. Adv. Des. Manuf. Technol. 76, 67 (2015).10.1007/s00170-013-5470-3 ↗
21. G. Qiao, T.F. Jing, N. Wang, Y.W. Gao, X. Zhao, J.F. Zhou, and W. Wang, High-Speed Jet Electrodeposition and Microstructure of Nanocrystalline Ni-Co Alloys. Electrochim. Acta. 51, 85 (2005).10.1016/j.electacta.2005.03.050 ↗
22. W. Cui, K. Wang, K.Y. Wang, and P. Wang, Effects of Jet Rate on Microstructure, microhardness, and Wear Behavior of Jet Electrodeposited Ni-SiC Composites. Ceram. Int. 44, 7214 (2018).10.1016/j.ceramint.2018.01.169 ↗
23. Y. Zhang, M. Kang, L. Yao, N.S. Mbugua, M.F. Jin, and J.P. Zhu, Study on the Wear and Seawater Corrosion Resistance of Ni-Co-P Alloy Coatings with Jet Electrodeposition in Different Jet Voltages and Temperatures of Plating Solution. Coatings 10, 639 (2020).10.3390/coatings10070639 ↗
24. D.D. Ning, A. Zhang, M. Murtaza, and H. Wu, Effect of Surfactants on the Electrodeposition of Cu-TiO2 Composite Coatings Prepared by Jet Electrodeposition. J. Alloys Compd. 777, 1245 (2019).10.1016/j.jallcom.2018.11.077 ↗
25. J. Tan, H. Song, X.H. Zheng, Q. Zhang, and M. Wang, High Performance Co-Cr3C2 Composite Coating by Jet Electrodeposition. Surf. Eng. 34, 861 (2018).10.1080/02670844.2017.1416944 ↗
26. F.X. Wang, X.Q. Fu, M.Q. Shen, Y. Xu, S.L. Duan, Q.Q. Wang, H.B. Cao, and J.R. Lin, Preparation of Ni-P-SiC Composite Coatings by Magnetic Field-Enhanced Jet Electrodeposition. Int. J. Electrochem. Sci. 15, 10432 (2020).10.20964/2020.10.13 ↗
27. C. Wang, L.D. Shen, M.B. Qiu, Z.J. Tian, and W. Jiang, Characterizations of Ni-CeO2 Nanocomposite Coating by Interlaced Jet Electrodeposition. J. Alloys Compd. 727, 269 (2017).10.1016/j.jallcom.2017.08.105 ↗
28. Z. Zheng, N. Li, D.Y. Li, and F.Y. Meng, Effect of CeO2 on the Property of Zn-Ni/CeO2 Composite Coating. Surf. Technol. 41, 23 (2012). (In Chinese).
29. H. Fan, Y.P. Zhao, S.K. Wang, and H.F. Guo, Effect of Jet Electrodeposition Conditions on Microstructure and Mechanical Properties of Cu-Al2O3 Composite Coatings. Int. J. Adv. Des. Manuf. Technol. 105, 4509 (2019).10.1007/s00170-019-03419-5 ↗
30. G. Wang, Y. Huang, and Z. Tian, Effect of Hydrogen Evolution on the Growth of Nickel Dendrite by Electrodeposition. Electroplat. Finish. 1, 1 (2008). (In Chinese).
31. H. Fan, Y.P. Zhao, J. Jiang, S.K. Wang, and W. Shan, Improvement of Microstructure and Wear Resistance of the Ni-La2O3 Nanocomposite Coatings by Jet-Electrodeposition. J. Electron. Mater. 50, 1 (2021).10.1007/s11664-021-08849-0 ↗
32. Z.Y. Song, H.W. Zhang, X.Q. Fu, J.R. Lin, M.Q. Shen, Q.Q. Wang, and S.L. Duan, Effect of Current Density on the Performance of Ni-P-ZrO2-CeO2 Composite Coatings Prepared by Jet-Electrodeposition. Coatings 10, 616 (2020).10.3390/coatings10070616 ↗
33. S.A. Lajevardi, T. Shahrabi, and J.A. Szpunar, Synthesis of Functionally Graded Nano Al2O3-Ni Composite Coating by Pulse Electrodeposition. Appl. Surf. Sci. 279, 180 (2013).10.1016/j.apsusc.2013.04.067 ↗
34. Q.D. Lv, X.Q. Fu, X.X. Chen, J.R. Lin, and H.B. Cao, Investigating the Effects of the Current Density on the Properties of Ni-P-La2O3 Composite Coatings. Int. J. Electrochem. Sci. 15, 11250 (2020).10.20964/2020.11.76 ↗