Analysis of Electrical and Impedance Properties of the Group-I (Li, Na, K & Cs) Doped ZnO Nanorods
Source abstract
Abstract
ZnO and ZnO seed layers doped with group-I elements (Li, Na, K & Cs) were prepared by spin coating. Seed layer is used to prepare nanorods by hydrothermal method. Doped and undoped nanorods structural, surface morphology, and electrical conductivity properties are characterized by x-ray diffraction, field emission scanning electron microscopy (FESEM), and impedance spectroscopy. Undoped and doped ZnO nanorods show wurtzite structure without a secondary phase. Vertically aligned hexagonal-shaped nanorods are observed from FESEM and surface porosity is calculated. A single conduction process with a Debye relaxation peak is obtained in all the nanorods from impedance analysis. Electrical conductivity $$({\sigma }ac)$$ measurement of undoped and doped ZnO nanorods follows Janscher’s power law with high-frequency exponent values which leads to quantum mechanical tunneling conduction. Doped ZnO nanorods show a higher $${\sigma }ac$$ values than ZnO. A reduction of potential barrier height and activation energy is observed in the ZnO nanorods doped with group-I elements.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: ZnO doping and properties · Gas Sensing Nanomaterials and Sensors · Conducting polymers and applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. Y.K. Mishra, and R. Adelung, Mater. Today 21, 631 (2018).10.1016/j.mattod.2017.11.003 ↗
2. J. Rouhi, C.H. Raymond Ooi, S. Mahmud, and M.R. Mahmood, Mater. Lett. 147, 34 (2015).10.1016/j.matlet.2015.02.023 ↗
3. H. Oh, J. Park, W. Choi, H. Kim, Y. Tchoe, A. Agrawal, and G.-C. Yi, Small 14, 1800240 (2018).10.1002/smll.201800240 ↗
4. A. Manikandan, M. Yogasundari, K. Thanrasu, A. Dinesh, K. Raja, Y. Kanmani Slimani, S.K. Jaganathan, R. Srinivasan, and A. Baykal, Physica E Low Dimens. Syst. Nanostruct. 124, 114291 (2020).10.1016/j.physe.2020.114291 ↗
5. Y. Slimani, A. Selmi, E. Hannachi, M.A. Almessiere, A. Baykal, and I. Ercan, J. Mater. Sci.: Mater. Electron. 30, 9520 (2019).
6. E. Hannachi, Y. Slimani, F. Al-qwairi, M. Almessiere, and F.B. Azzouz, Solid State Sci. 105, 106264 (2020).10.1016/j.solidstatesciences.2020.106264 ↗
7. S. Blessi, S. Anand, A. Manikandan, M.M.L. Sonia, V.M. Vinosel, Y. Slimani, M. Almessiere, and A. Baykal, J. Mater. Sci.: Mater. Electron. 32, 7630 (2021).
8. S. Blessi, S. Anand, A. Manikandan, M.M.L. Sonia, V.M. Vinosel, Y. Slimani, M. Almessiere, and A. Baykal, J. Mater. Sci.: Mater. Electron. 32, 4132 (2021).
9. M. Nadeem, G. Yasin, M. Arif, H. Tabassum, M.H. Bhatti, M. Mahemood, U. Yunus, R. Iqbal, T.A. Nguyen, and Y. Slimani, Chem. Eng. J. 409, 128205 (2021).10.1016/j.cej.2020.128205 ↗
10. Y. Slimani, M. Almessiere, S.E. Shirsath, E. Hannachi, G. Yasin, A. Baykal, B. Ozcelik, and I. Ercan, J. Magn. Magn. Mater. 510, 166933 (2020).10.1016/j.jmmm.2020.166933 ↗
11. Y. Slimani, B. Unal, M. Almessiere, E. Hannachi, G. Yasin, A. Baykal, and I. Ercan, J. Mater. Sci.: Mater. Electron. 31, 7786 (2020).
12. Y. Slimani, B. Unal, M. Almessiere, A.D. Korkmaz, S.E. Shirsath, G. Yasin, A. Trukhanov, and A. Baykal, Results Phys. 17, 103061 (2020).10.1016/j.rinp.2020.103061 ↗
13. B. Wang, L. Tang, J. Qi, H. Du, and Z. Zhang, J. Alloys Compd. 503, 436 (2010).10.1016/j.jallcom.2010.05.028 ↗
14. R. Vettumperumal, S. Kalyanaraman, and R. Thangavel, J. Sol-Gel Sci. Technol. 66, 206 (2013).10.1007/s10971-013-2993-x ↗
15. B. Santoshkumar, S. Kalyanaraman, R. Thangavel, T. Santhoshkumar, G. Annadurai, I.V. Kityk, J. Jedryka, K. Ozga, and A. Slezak, J. Mater. Sci. Mater. Electron. 29, 15291 (2018).10.1007/s10854-018-8794-9 ↗
16. M.K. Gupta, N. Sinha, and B. Kumar, J. Appl. Phys. 109, 083532 (2011).10.1063/1.3574656 ↗
17. C.-H. Huang, Y.-L. Chu, L.-W. Ji, I. T. Tang, T.-T. Chu, and B.-J. Chiou, Microsyst. Technol. 26, 1 (2020).10.1007/s00542-019-04623-9 ↗
18. J. Huang, J. Qi, Z. Li, and J. Liu, Nanotechnology 24, 395203 (2013).10.1088/0957-4484/24/39/395203 ↗
19. D. Fernández-Hevia, M. Peiteado, J. Frutos, A. Caballero, and J.F. Fernández, J. Eur. Ceram. Soc. 24, 1205 (2004).10.1016/S0955-2219(03)00411-4 ↗
20. R.N. Aljawfi, F. Rahman, and K.M. Batoo, J. Mol. Struct. 1065–1066, 199 (2014).10.1016/j.molstruc.2014.02.056 ↗
21. K.M. Batoo, G. Kumar, Y. Yang, Y. Al-Douri, M. Singh, R.B. Jotania, and A. Imran, J. Alloy. Compd. 726, 179 (2017).10.1016/j.jallcom.2017.07.237 ↗
22. M. Laurenti, and V. Cauda, Coatings 8, 67 (2018).10.3390/coatings8020067 ↗
23. M.K. Gupta, N. Sinha, B.K. Singh, and B. Kumar, Mater. Lett. 64, 1825 (2010).10.1016/j.matlet.2010.05.044 ↗
24. V. Bornand, Thin Solid Films 574, 152 (2015).10.1016/j.tsf.2014.12.011 ↗
25. R. Mariappan, V. Ponnuswamy, R. Suresh, P. Suresh, A. Chandra Bose, and M. Ragavendar, J. Alloys Compd. 582, 387 (2014).10.1016/j.jallcom.2013.08.048 ↗
26. R. Vettumperumal, S. Kalyanaraman, B. Santoshkumar, and R. Thangavel, Mater. Res. Bull. 50, 7 (2014).10.1016/j.materresbull.2013.10.015 ↗
27. B. Santoshkumar, S. Kalyanaraman, R. Vettumperumal, R. Thangavel, I.V. Kityk, and S. Velumani, J. Alloy. Compd. 658, 435 (2016).10.1016/j.jallcom.2015.10.067 ↗
28. C.-H. Hsu, and D.-H. Chen, J. Nanotechnol. 21, 285603 (2010).10.1088/0957-4484/21/28/285603 ↗
29. M. Chakraborty, A. Ghosh, and R. Thangavel, J. Sol-Gel Sci. Technol. 74, 756 (2015).10.1007/s10971-015-3660-1 ↗
30. R. Vettumperumal, S. Kalyanaraman, and R. Thangavel, J. Mol. Struct. 1059, 61 (2014).10.1016/j.molstruc.2013.11.044 ↗
31. F.K. Shan, G.X. Liu, W.J. Lee, and B.C. Shin, J. Cryst. Growth 291, 328 (2006).10.1016/j.jcrysgro.2006.03.036 ↗
32. M.K. Gupta, and B. Kumar, J. Alloy. Compd. 509, L208 (2011).10.1016/j.jallcom.2011.03.119 ↗
33. C.S. Prajapati, S.N. Pandey, and P.P. Sahay, Phys. B 406, 2684 (2011).10.1016/j.physb.2011.02.075 ↗
34. Y.-C. Liang, C.-S. Hung, and W.-C. Zhao, J. Nanomater. 10, 1352 (2020).10.3390/nano10071352 ↗
35. P. Dutta, S. Biswas, M. Ghosh, S. De, and S. Chatterjee, Synth. Met. 122, 455 (2001).10.1016/S0379-6779(00)00588-9 ↗
36. H. Rahmouni, M. Nouiri, R. Jemai, N. Kallel, F. Rzigua, A. Selmi, K. Khirouni, and S. Alaya, J. Magn. Magn. Mater. 316, 23 (2007).10.1016/j.jmmm.2007.03.208 ↗
37. G. Kuczynski, In: Sintering and Related Phenomena: Proceedings of the Third International Conference on Sintering and Related Phenomena, held at the University of Notre Dame, June 5–7, 1972, Vol. 6 (Springer Science & Business Media, 2012)10.1007/978-1-4615-8999-0 ↗
38. M. Pal, P. Brahma, and D. Chakravorty, J. Phys. Soc. Jpn. 63, 3356 (1994).10.1143/JPSJ.63.3356 ↗
39. M. Kashif, M.E. Ali, S.M.U. Ali, U. Hashim, and S.B.A. Hamid, Nanoscale Res. Lett. 8, 68 (2013).10.1186/1556-276X-8-68 ↗
40. A. Saif, and P. Poopalan, J. Korean Phys. Soc. 57, 1449 (2010).10.3938/jkps.57.1449 ↗
41. K. Lily, K. Prasad, and R.N.P. Choudhary, J. Alloys Compd. 453, 325 (2008).10.1016/j.jallcom.2006.11.081 ↗
42. V. Usha, S. Kalyanaraman, R. Vettumperumal, and R. Thangavel, Physica B 504, 63 (2017).10.1016/j.physb.2016.10.011 ↗
43. S.R. Elliott, Solid State Ion. 70–71, 27 (1994).10.1016/0167-2738(94)90284-4 ↗
44. R. Chen, R.-J. Wang, T. Chen, and C.-S. Shern, J. Phys. Chem. Solids 61, 519 (2000).10.1016/S0022-3697(99)00246-2 ↗
45. H.M. El-Mallah, and N.A. Hegab, J. Mater. Sci. 42, 332 (2007).10.1007/s10853-006-1030-7 ↗
46. Ž Cvejić, S. Rapajić, S. Rakić, S. Jankov, S. Skuban, and V.V. Srdić, Phys Scr 90, 095802 (2015).10.1088/0031-8949/90/9/095802 ↗
47. S. Tewari, A. Bhattacharjee, and P.P. Sahay, Assam Univ. J. Sci. Technol. Phys. Sci. Technol. 5, 216 (2010).
48. R. Saravanan, T. Prakash, V.K. Gupta, and A. Stephen, J. Mol. Liq. 193, 160 (2014).10.1016/j.molliq.2013.12.029 ↗
49. E. Schmidbauer, and P. Schmid-Beurmann, J. Solid State Chem. 177, 207 (2004).10.1016/j.jssc.2003.07.006 ↗