Methane Sensitivity of Alpha-Fe2O3 Obtained from Pechini Combustion Synthesis using Different Organic Fuels
Source abstract
Abstract
Phase-pure alpha-iron-oxide (α-Fe2O3) nano-powders were obtained via Pechini gel-combustion using iron nitrates as an oxidant and different organic compounds (L-alanine, glycine, citric acid, oxalic acid, tartaric acid and urea) as fuels. The complex precursors isolated before the system's combustion were characterized by thermal analysis (TGA). After combustion, the as-synthesized powders were calcined at 600°C to obtain the α-Fe2O3 phase and eliminate the residual carbon. The powders prepared using different fuels were characterized using x-ray diffraction and field emission scanning electron microscopy. n-type gas sensitivity of thick film resistive sensors fabricated by using α-Fe2O3 powders was investigated in detail and it was observed that amongst the different fuels, citric acid-derived α-Fe2O3 is methane selective at 120°C operating temperature, examined in the presence of other similar types of resistive gas analyses of the same concentrations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Gas Sensing Nanomaterials and Sensors · Electrochemical Analysis and Applications · Analytical Chemistry and Sensors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. M. Fuller, Experimental methods in rock magnetism and paleomagnetism, Methods in Experimental Physics, Vol. 470. ed. C.G. Sammis, and T.L. Henyey (Cambridge: Academic Press, 1987).
2. H.M. Lu, and X.K. Meng, J. Phys. Chem. C 114, 21291 (2010).10.1021/jp108703b ↗
3. C.G. Shull, W.A. Strauser, and O.E. Wollan, Phys. Rev. 83, 333 (1951).10.1103/PhysRev.83.333 ↗
4. C. Leighton, A. Hoffmann, M.R. Fitzsimmons, J. Nogues, and I.K. Schuller, Phil. Mag. B 81, 1927 (2001).10.1080/13642810110061501 ↗
5. P. Chauhan, S. Annapoomi, and S.K. Trikha, Bull. Mater. Sci. 21, 381 (1998).10.1007/BF02744922 ↗
6. Q. Zhang, R. Zheng, J. Ding, P. Cui, Z. Wang, P. Lv, and W. Wei, J. Am. Ceram. Soc. (2021). https://doi.org/10.1111/jace.1767210.1111/jace.17672 ↗
7. R.C. Massé, C. Liu, Y. Li, L. Mai, and G. Cao, Natl. Sci. Rev. 4, 26 (2017).10.1093/nsr/nww093 ↗
8. B. Ouertani, G. Bidouk, R. Ouertani, B. Teys, and H. Ezzaouia, Mater. Chem. Phys. 242, 122272 (2020).10.1016/j.matchemphys.2019.122272 ↗
9. J.H. Kennedy, and D.J. Dunnwald, Electrochem. Soc. 130, 2013 (1983).10.1149/1.2119511 ↗
10. J. Sarradin, M. Ribes, A. Guessous, and K. Elkacemi, Solid State Ionics 112, 35 (1998).10.1016/S0167-2738(98)00211-2 ↗
11. G. Neri, A. Bonavita, S. Ipsale, G. Rizzo, C. Baratto, G. Faglia, and G. Sberveglieri, Maters. Sc. Engg. B 139, 41 (2007).10.1016/j.mseb.2007.01.039 ↗
12. J.S. Han, T. Bredow, D.E. Davey, A.B. Yu, and D.E. Mulcahy, Sens. Actuators B 75, 18 (2001).10.1016/S0925-4005(00)00688-2 ↗
13. N.T.A. Thu et al., Sens. Actuators B 255, 3275 (2018).10.1016/j.snb.2017.09.154 ↗
14. E.T. Lee, G.E. Jang, C.K. Kim, and D.H. Yoon, Sens. Actuators B 77, 221 (2001).10.1016/S0925-4005(01)00716-X ↗
15. H.-J. Zhang, F.-N. Meng, L.-Z. Liu, and Y.-J. Chen, J. Alloys Comp. 774, 1181 (2019).10.1016/j.jallcom.2018.09.384 ↗
16. Y. Cheng, H. Guo, Y. Wang, Y. Zhao, Y. Li, L. Liu, H. Li, and H. Duan, Mater. Res. Bull. 105, 21 (2018).10.1016/j.materresbull.2018.04.025 ↗
17. S. Majumdar, A. Nandi, and H. Saha, IEEE Sens. J. 18, 6517 (2018).10.1109/JSEN.2018.2849863 ↗
18. A. Nandi, P. Nag, D. Panda, S. Dhar, S.M. Hossain, H. Saha, and S. Majumdar, ACS Omega 4, 11053 (2019).10.1021/acsomega.9b01372 ↗
19. X.Q. Liu, S.W. Tao, and Y.S. Shen, Sens. Actuators B 40, 161 (1997).10.1016/S0925-4005(97)80256-0 ↗
20. Y. Nakatani, and M. Matsuoka, Jpn. J. Appl. Phys. 21, 1758 (1982).10.1143/JJAP.21.L758 ↗
21. S.R. Jain, K.C. Adiga, and V.R. Pai Verneker, Comb. Flame 40, 71 (1981).10.1016/0010-2180(81)90111-5 ↗
22. M.P. Pechini, US Patent 3,330,697 (1967).
23. W.M. Haynes (Edt.) CRC Handbook of Chemistry and Physics, 95th Edn. CRC press LLC, New York, 5-82-91 (2014-15).10.1201/b17118 ↗
24. R.H. Perry, and C.H. Chilton, Chemical Engineering Handbook, 7th ed., (New York: McGraw-Hill, 1997).
25. J.A. Dean, Lange’sHandbook of Chemistry, 15th ed., (New York: McGraw-Hill, 1998).
26. L.E. Shea, J. Mckittrick, and O.A. Lopez, J. Am. Ceram. Soc. 79, 3257 (1996).10.1111/j.1151-2916.1996.tb08103.x ↗
27. S.R. Jain, K.C. Adiga, and V.R. Paivernekar, Combust. Flame 40, 71 (1981).10.1016/0010-2180(81)90111-5 ↗
28. S. Majumdar, Ceram. Int. 41, 14350 (2015).10.1016/j.ceramint.2015.07.068 ↗
29. S. Majumdar, Appl. Surf. Sci. 376, 290 (2016).10.1016/j.apsusc.2016.02.246 ↗
30. H. Liu, T. Peng, H. Sun, R. Xie, and G. Ma, RSC Adv. 7, 11414 (2017).10.1039/C6RA26167A ↗
31. D. Garcia, G. Picasso, P. Hidalgo, H.E.M. Peres, R.S. Kou, and J.M. Goncalves, Anal. Chem. Res. 12, 74 (2017).10.1016/j.ancr.2016.12.001 ↗
32. J.N. Mao, B. Hong, H.D. Chen, M.H. Gao, J.C. Xu, Y.B. Han, Y.T. Yang, H.X. Jin, D.F. Jin, X.L. Peng, J. Li, H.L. Ge, and X.Q. Wang, J. Alloys Comp. 827, 154248 (2020).10.1016/j.jallcom.2020.154248 ↗
33. M. Hjiri, M.S. Aida, and G. Neri, Sensors 19, 167 (2019).10.3390/s19010167 ↗
34. Y. Teng, X.-F. Zhang, T.-T. Xu, Z.-P. Deng, Y.-M. Xu, L.-H. Huo, and S. Gao, Chem. Eng. J. 392, 123679 (2020).10.1016/j.cej.2019.123679 ↗
35. B. Chaitongrat and S. Chaisitsak, 2018, 9236450 (2018).10.1155/2018/9236450 ↗
36. S. Liang, J. Li, F. Wang, J. Qin, X. Laib, and X. Jiang, Sens. Actuators B 238, 923 (2017).10.1016/j.snb.2016.06.144 ↗
37. H. Ma, Y. Du, M. Wei, E. Ding, and L. Lin, Sens. Actuators A 295, 70 (2019).10.1016/j.sna.2019.05.039 ↗
38. D. Kohl, J. Phys. D: Appl. Phys. 34, R125 (2001).10.1088/0022-3727/34/19/201 ↗
39. S. Mustafa, S. Tasleem, and A. Naeem, J. Colloid Inter. Sci. 275, 523 (2004).10.1016/j.jcis.2004.02.089 ↗
40. A. Auroux, and A. Gervasini, J. Phys. Chem. 94, 6371 (1990).10.1021/j100379a041 ↗
41. N. Lopez, T.V.W. Janssens, B.S. Clausen, Y. Xu, M. Mavrikakis, T. Bligaard, and J.K. Nerskov, J. Catal. 223, 232 (2004).10.1016/j.jcat.2004.01.001 ↗
42. P. Li, D.E. Miser, S. Rabiei, R.T. Yadav, and M.R. Hajaligol, Appl. Catal. B 43, 151 (2003).10.1016/S0926-3373(02)00297-7 ↗